Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 02-04-2021, 04:56 PM   #1
ryanclesi
Zilvia Member
 
Join Date: Mar 2013
Location: CA
Posts: 151
Trader Rating: (0)
ryanclesi is an unknown quantity at this point
Feedback Score: 0 reviews
headlight and wiring issue

before you give me shit and tell me to check the FSM and read other forums, i have. I have spent 4 hours reading and googling other posts and no such luck. My tailights do not work and my headlights do not work. Cornerlights and blinkers all work and so do the brake lights. I checked the switch and i have power in and out when turned on. I also checked the relay and i have power to the relay and power out when switch is activated. Just put in new hid kit and the headlights turned on and worked, 10 seconds later they shut off and nothing worked. All the fuses are good (which according to the FSM are before the relay and switch anyway so if i have power at those i couldnt have missed a fuse, if im not mistaken)

Are the tail lights/headlights/cornerlights all operating off the one fuse?

i know its not the correct way but would there be issues with wiring the headlights into the corner lights?
ryanclesi is offline   Reply With Quote
Sponsored Links
Old 02-04-2021, 05:15 PM   #2
JrDarknes
Zilvia Junkie
 
JrDarknes's Avatar
 
Join Date: Jan 2013
Location: Indianapolis, IN
Age: 26
Posts: 475
Trader Rating: (7)
JrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud ofJrDarknes has much to be proud of
Feedback Score: 7 reviews
Quote:
Originally Posted by ryanclesi View Post
before you give me shit and tell me to check the FSM and read other forums, i have. I have spent 4 hours reading and googling other posts and no such luck. My tailights do not work and my headlights do not work. Cornerlights and blinkers all work and so do the brake lights. I checked the switch and i have power in and out when turned on. I also checked the relay and i have power to the relay and power out when switch is activated. Just put in new hid kit and the headlights turned on and worked, 10 seconds later they shut off and nothing worked. All the fuses are good (which according to the FSM are before the relay and switch anyway so if i have power at those i couldnt have missed a fuse, if im not mistaken)

Are the tail lights/headlights/cornerlights all operating off the one fuse?

i know its not the correct way but would there be issues with wiring the headlights into the corner lights?
What car?

Hmmm and youre sure all the fuses are good?
Not sure about corner lights but tail lights have their own fuse inside the S13 and headlamps have their own fuses in the engine bay.

You may be able to get away with that but I recommend taking the light signal from the stalk and use it as a signal for a relay. Use the relay 12V from teh battery to power the headlights instead. Much better idea imo. Don't forget to have a 10A fuse if you decide to do this.
__________________
Instagram: Nismo_Lk
JrDarknes is offline   Reply With Quote
Old 02-04-2021, 05:35 PM   #3
ryanclesi
Zilvia Member
 
Join Date: Mar 2013
Location: CA
Posts: 151
Trader Rating: (0)
ryanclesi is an unknown quantity at this point
Feedback Score: 0 reviews
its a 1998 240sx sorry i didnt throw that in there. All the wiring from the switch to the relay seems to work thats why im so confused. wouldnt the corner lights be protected by a fuse as well? why the extra step
ryanclesi is offline   Reply With Quote
Old 02-05-2021, 08:20 AM   #4
LoSt180
Zilvia Addict
 
LoSt180's Avatar
 
Join Date: May 2013
Location: MD
Posts: 966
Trader Rating: (18)
LoSt180 is an unknown quantity at this point
Feedback Score: 18 reviews
Have you checked for power at the headlight wire? Did you use the stock wiring for this kit or did you run a sub-harness for the HID lights?

I won't get into why you shouldn't bother with those HID kits in the first place. Generally they draw more current than the stock lights, so should be wired in with a separate harness with it's own relay and power to the lights. Due to the fact that the lights worked for 10 seconds then went out, my hunch is that you melted the stock wiring.

The headlights are fed by a 15A fuse for EACH side, stop lights have their own 10A fuse, and the parking lights (front, side, rear) are all fed from the SAME 10A fuse. So it would be a bad idea to try to wire that crappy hid kit into those wires.
LoSt180 is offline   Reply With Quote
Old 02-05-2021, 08:13 PM   #5
ryanclesi
Zilvia Member
 
Join Date: Mar 2013
Location: CA
Posts: 151
Trader Rating: (0)
ryanclesi is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by LoSt180 View Post
Have you checked for power at the headlight wire? Did you use the stock wiring for this kit or did you run a sub-harness for the HID lights?

I won't get into why you shouldn't bother with those HID kits in the first place. Generally they draw more current than the stock lights, so should be wired in with a separate harness with it's own relay and power to the lights. Due to the fact that the lights worked for 10 seconds then went out, my hunch is that you melted the stock wiring.

The headlights are fed by a 15A fuse for EACH side, stop lights have their own 10A fuse, and the parking lights (front, side, rear) are all fed from the SAME 10A fuse. So it would be a bad idea to try to wire that crappy hid kit into those wires.

I am using the stock harness for the switch and the relay but after the relay it turns into number 12 wire for each headlight. I have relocated the fuse box underneath the dash and I had the HID kits before. They never gave me any problems. I do not have power at the H ID kit. I guess I will have to check the wires and see if they are burnt. But I would think that the fuse would blow before the wire melts?
ryanclesi is offline   Reply With Quote
Old 03-15-2021, 04:36 PM   #6
DiscountPirate
Zilvia Member
 
Join Date: Jul 2016
Location: SoCal
Posts: 189
Trader Rating: (0)
DiscountPirate is an unknown quantity at this point
Feedback Score: 0 reviews
I know more about s13 but if problem started when you wired in an HID kit that would be where I would start. Obviously check all the fuses but maybe a common relay got fried closed or something.
DiscountPirate is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:22 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™