12.2 @ 126.6 SR w/new turbo setup!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Enjuku Racing · 10-19-2002, 11:11 AM

We went to the track last night w/ our new turbo kit on the car. The car performed even better than we thought it would. Traction is a problem still. But, the car is SO FAST. I went 12.2 @ 126.6 with an aweful 60ft (2.28) The car either tears up the tires or bogs. I need to practice launching some, but it is hard at the track here when you spend all night and get only 2 runs in.

We were really only expecting 118mph out of the car. I didnt even have the boost turned up as high as we did when we put down 393hp to the wheels. I think I was at about 20psi on the turbo kit. And the clutch was slipping in 4th gear (Time for a SPEC Stage 3). I think the car has 128mph in it easy with some better driving and easy 11's.

For those of you running these kind of #'s what kind of tires and suspension setups are you running?

Thanks guys,
Ken
www.enjukuracing.com - for all your performance needs!!

Jim96SC2 · 10-19-2002, 11:38 AM

You running a VLSD or a MLSD?

mbmbmb23 · 10-19-2002, 11:48 AM

Have you replaced your subframe busings?  If not, try those aluminum spacers to help your launches.

-m

Enjuku Racing · 10-19-2002, 04:11 PM

We have a Kazz LSD and yea we put the subframe spacers on little while ago. They helped out a lot with the wheel hop.

Thanks,
Ken
www.enjukuracing.com - for all your performance needs!!

AutoDestruct · 10-19-2002, 07:33 PM

Do have a roll cage or any other stuctural stiffening aids(foam, welds, submembers)?  Did you have to make the car stronger anywhere to prevent bending, tears or other stresses to the vehicle?  Is there any preloaded suspension pieces?  Just wondering, your car sounds extremely fun.  Itmakes me jealous in a good way <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

GamblerZ · 10-20-2002, 03:41 PM

What setup do you have?

*ca18guy* · 10-20-2002, 04:38 PM

</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (GamblerZ @ Oct. 21 2002,10:41)</td></tr><tr><td id="QUOTE">What setup do you have?</td></tr></table><span id='postcolor'>
Goto there website, there is a link to the car.

boosteds14 · 10-21-2002, 07:08 AM

126??
holy speed batman

get that launch down and 11's will surely be on the way

Goodbar6 · 10-21-2002, 10:12 PM

Wow, yea, definatly should be able to get 11's with that MPH! Congrats!
Tyler <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt='

'>

Enjuku Racing · 10-22-2002, 10:28 AM

Nope, no cage in the car yet.... it will be put in shortly.

Here is a link to the time slip www.enjukuracing.com/images/12.2.jpg

I am going to be going back out to the track tomorrow for some more runs. Need to practice that launch and get into the 11's. Should be easy.

Then the car will take a rest, while we finish production on the turbo kits and some extras put on the car!!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt='

'>

Let me know if you have any questions. Thanks for the compliments.

Ken
www.enjukuracing.com - for all your performance needs!!

boosteds14 · 10-22-2002, 10:48 AM

i know you guys are using NISSDATA. my question is, What does it actually look like. i know looks doesnt mean anything but i was just curious.

also, will it be pre-programmed when u sell the kit?

Enjuku Racing · 10-22-2002, 12:15 PM

NissData is not seen. It is just an ECU chip. If we sell the chips with the kit it will be a generic pre-programmed tune. For better tunning you would want to put the car on the dyno.

Thanks,
Ken
www.enjukuracing.com - for all your performance needs!!

CoasTek240 · 10-22-2002, 05:50 PM

wow those are very impressive times.. i agree with boosted.. a little better on the launch and 11's should come.. that's really nice..how much is the kit btw...(sr20 right?) do u offer a ka kit?

10-19-2002, 11:11 AM	#1
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 37 Posts: 3,045 Trader Rating: (29) Feedback Score: 29 reviews	We went to the track last night w/ our new turbo kit on the car. The car performed even better than we thought it would. Traction is a problem still. But, the car is SO FAST. I went 12.2 @ 126.6 with an aweful 60ft (2.28) The car either tears up the tires or bogs. I need to practice launching some, but it is hard at the track here when you spend all night and get only 2 runs in. We were really only expecting 118mph out of the car. I didnt even have the boost turned up as high as we did when we put down 393hp to the wheels. I think I was at about 20psi on the turbo kit. And the clutch was slipping in 4th gear (Time for a SPEC Stage 3). I think the car has 128mph in it easy with some better driving and easy 11's. For those of you running these kind of #'s what kind of tires and suspension setups are you running? Thanks guys, Ken www.enjukuracing.com - for all your performance needs!! __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

10-19-2002, 11:38 AM	#2
Jim96SC2 Zilvia Junkie Join Date: Apr 2002 Location: Long Island, NY Age: 39 Posts: 405 Trader Rating: (0) Feedback Score: 0 reviews	You running a VLSD or a MLSD? __________________ Swap DONE: 40K Redtop, Greddy Turbo extension, Greddy DP, Greddy V-SPL FMIC, Greddy Hotpipe, HKS SSQV, Koyo Radiator, Toda Ultralight FW, Spec Stage 2 Clutch, ATS 2-way Diff., Rice-Boy Red Air Filter.

10-19-2002, 11:48 AM	#3
mbmbmb23 Zilvia Contributor Join Date: Oct 2001 Location: Charlotte, NC. Posts: 1,776 Trader Rating: (1) Rides Gallery: mbmbmb23 Feedback Score: 1 reviews	Have you replaced your subframe busings?  If not, try those aluminum spacers to help your launches. -m __________________ 400x200

10-19-2002, 04:11 PM	#4
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 37 Posts: 3,045 Trader Rating: (29) Feedback Score: 29 reviews	We have a Kazz LSD and yea we put the subframe spacers on little while ago. They helped out a lot with the wheel hop. Thanks, Ken www.enjukuracing.com - for all your performance needs!! __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

10-20-2002, 03:41 PM	#6
GamblerZ Zilvia Junkie Join Date: Aug 2002 Location: West Texas Posts: 414 Trader Rating: (1) Feedback Score: 1 reviews	What setup do you have? __________________ Visit WTI - WestTexasImports.net

10-19-2002, 07:33 PM	#5
AutoDestruct Zilvia Junkie Join Date: Aug 2002 Location: The Burg, Harrisburg Posts: 437 Trader Rating: (0) Feedback Score: 0 reviews	Do have a roll cage or any other stuctural stiffening aids(foam, welds, submembers)?  Did you have to make the car stronger anywhere to prevent bending, tears or other stresses to the vehicle?  Is there any preloaded suspension pieces?  Just wondering, your car sounds extremely fun.  Itmakes me jealous in a good way <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/thumbs-up.gif" border="0" valign="absmiddle" alt=':thumbsup:'>

10-20-2002, 04:38 PM	#7
ca18guy Premium Member Join Date: Jul 2001 Location: Clearwater FL Age: 39 Posts: 3,226 Trader Rating: (0) Rides Gallery: ca18guy Feedback Score: 0 reviews	</span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (GamblerZ @ Oct. 21 2002,10:41)</td></tr><tr><td id="QUOTE">What setup do you have?</td></tr></table><span id='postcolor'> Goto there website, there is a link to the car.

10-21-2002, 07:08 AM	#8
boosteds14 Zilvia.net Advertiser Join Date: Jan 2002 Location: CIPmotorsports Age: 39 Posts: 1,612 Trader Rating: (0) Feedback Score: 0 reviews	126?? holy speed batman get that launch down and 11's will surely be on the way __________________ 240SXONE www.240SXMOTORING.com --- One Stop Shop for Your Nissan 240sx

10-21-2002, 10:12 PM	#9
Goodbar6 Leaky Injector Join Date: Feb 2002 Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	Wow, yea, definatly should be able to get 11's with that MPH! Congrats! Tyler <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/biggrin.gif" border="0" valign="absmiddle" alt=''> __________________ ___ 1990 Nissan Maxima (Daily Driver) 1989 Nissan 240SX (sold...kicking myself in the butt for it) Soon Another S13 for me to play with :-) --Tyler Loewens

10-22-2002, 10:28 AM	#10
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 37 Posts: 3,045 Trader Rating: (29) Feedback Score: 29 reviews	Nope, no cage in the car yet.... it will be put in shortly. Here is a link to the time slip www.enjukuracing.com/images/12.2.jpg I am going to be going back out to the track tomorrow for some more runs. Need to practice that launch and get into the 11's. Should be easy. Then the car will take a rest, while we finish production on the turbo kits and some extras put on the car!!! <img src="http://www.zilvia.net/f/iB_html/non-cgi/emoticons/smile.gif" border="0" valign="absmiddle" alt=''> Let me know if you have any questions. Thanks for the compliments. Ken www.enjukuracing.com - for all your performance needs!! __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

10-22-2002, 10:48 AM	#11
boosteds14 Zilvia.net Advertiser Join Date: Jan 2002 Location: CIPmotorsports Age: 39 Posts: 1,612 Trader Rating: (0) Feedback Score: 0 reviews	i know you guys are using NISSDATA. my question is, What does it actually look like. i know looks doesnt mean anything but i was just curious. also, will it be pre-programmed when u sell the kit? __________________ 240SXONE www.240SXMOTORING.com --- One Stop Shop for Your Nissan 240sx

10-22-2002, 12:15 PM	#12
Enjuku Racing Zilvia.net Advertiser Join Date: Feb 2002 Location: Clermont, FL Age: 37 Posts: 3,045 Trader Rating: (29) Feedback Score: 29 reviews	NissData is not seen. It is just an ECU chip. If we sell the chips with the kit it will be a generic pre-programmed tune. For better tunning you would want to put the car on the dyno. Thanks, Ken www.enjukuracing.com - for all your performance needs!! __________________ Office: 352-241-8399 / 1-888-SR20DET (772-0338) YouTube.com/c/EnjukuRacingParts http://www.enjukuracing.com [email protected]

10-22-2002, 05:50 PM	#13
CoasTek240 Post Whore! Join Date: Jan 2002 Location: VA Age: 36 Posts: 3,034 Trader Rating: (3) Feedback Score: 3 reviews	wow those are very impressive times.. i agree with boosted.. a little better on the launch and 11's should come.. that's really nice..how much is the kit btw...(sr20 right?) do u offer a ka kit?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode