Sr20det won't start - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Adio · 05-30-2014, 08:36 AM

95 s14 w/red top sr20det w/map ecu

When I try to turn the car on, everything cuts off.

I have a battery relocation kit with a 200amp breaker switch to prevent any surges happening. When I take the switch off and connect the power directly to the battery it will start up.

I want to fix this issue but honestly have no idea where to start

Adio · 05-30-2014, 04:13 PM

All day and no response?

ultimateirving · 05-30-2014, 05:12 PM

I have a similar issue man, it's the current the starter takes to crank. Something is causing it to not have enough CCA TO turn the starter motor over.

I been trying to figure out what it is. My best guess is a bad ground or something.

Adio · 05-30-2014, 05:18 PM

I have 2 4g grounds. One off the head and the other off the intake mani, I'm clueless

ultimateirving · 05-30-2014, 06:17 PM

Quote:

Originally Posted by Adio

I have 2 4g grounds. One off the head and the other off the intake mani, I'm clueless

Trust me man I feel your pain, I regrounded the engine and ran a line all the way back to the battery and it still didn't help.

My car however will start if I keep switching the iginition on and off eventually it will crank over. But it takes like 4-10 tries with her just making a relay click sound and nothing else
That's why I feel there is a bad connection somewhere causing the volts/amps to drop when I turn the ignition.

Adio · 05-30-2014, 05:39 PM

My lights don't even work, but I get 12v to my fuse box post

hockeyplaye8511 · 05-30-2014, 10:16 PM

check the continuity of the breaker switch. If its starts with it removed you might have a bad wire or something there.

quickdiversion · 06-08-2014, 05:26 PM

you are getting 12v to the fuse box, but not out?
How do you know and where are you testing good for 12 volts at the fuse box, it absolutely nothing works?

Have you looked at the 75amp large fuse, that is the large grey one that supersedes all others in the box. It is your main and it is 75 amps Your 200 amp main is not needed and will fry that smaller main every time. Drop the 200 and make sure you didn't blow the actual main

05-30-2014, 08:36 AM	#1
Adio Leaky Injector Join Date: Jul 2011 Location: Ft Polk Age: 32 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Sr20det won't start 95 s14 w/red top sr20det w/map ecu When I try to turn the car on, everything cuts off. I have a battery relocation kit with a 200amp breaker switch to prevent any surges happening. When I take the switch off and connect the power directly to the battery it will start up. I want to fix this issue but honestly have no idea where to start __________________ ╭∩╮（︶︿︶）╭∩╮

05-30-2014, 04:13 PM	#2
Adio Leaky Injector Join Date: Jul 2011 Location: Ft Polk Age: 32 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	All day and no response? __________________ ╭∩╮（︶︿︶）╭∩╮

05-30-2014, 05:12 PM	#3
ultimateirving Zilvia FREAK! Join Date: Nov 2010 Location: arizona Age: 33 Posts: 1,519 Trader Rating: (1) Feedback Score: 1 reviews	I have a similar issue man, it's the current the starter takes to crank. Something is causing it to not have enough CCA TO turn the starter motor over. I been trying to figure out what it is. My best guess is a bad ground or something. __________________ Z32 with lq4 swap Desert Street Scene \|\| Dssevents.com

05-30-2014, 05:18 PM	#4
Adio Leaky Injector Join Date: Jul 2011 Location: Ft Polk Age: 32 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	I have 2 4g grounds. One off the head and the other off the intake mani, I'm clueless __________________ ╭∩╮（︶︿︶）╭∩╮

05-30-2014, 05:39 PM	#6
Adio Leaky Injector Join Date: Jul 2011 Location: Ft Polk Age: 32 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	My lights don't even work, but I get 12v to my fuse box post __________________ ╭∩╮（︶︿︶）╭∩╮

05-30-2014, 10:16 PM	#7
hockeyplaye8511 Join Date: Jun 2012 Location: Chicago Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	check the continuity of the breaker switch. If its starts with it removed you might have a bad wire or something there.

06-08-2014, 05:26 PM	#8
quickdiversion Zilvia Junkie Join Date: Aug 2012 Location: nj Age: 38 Posts: 341 Trader Rating: (4) Feedback Score: 4 reviews	you are getting 12v to the fuse box, but not out? How do you know and where are you testing good for 12 volts at the fuse box, it absolutely nothing works? Have you looked at the 75amp large fuse, that is the large grey one that supersedes all others in the box. It is your main and it is 75 amps Your 200 amp main is not needed and will fry that smaller main every time. Drop the 200 and make sure you didn't blow the actual main

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode