95 240sx over heated now won't start.. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Galaxy _S14 · 07-26-2013, 12:20 PM

On my way to work My radiator hose busted. It over heated bas before I could cut it off. Replaced hose filled with water and it turns over try to start but keeps cutting out.. Water in the exhaust but none in the oil? I noticed alot of steam coming from the intake... Intake gasket maybe.. Any help would be appreciated

Sent from my SPH-D710BST using Tapatalk 2

Rich260z · 07-26-2013, 01:04 PM

Blown headgasket, you probably don't have any compression, or coolant is leaking everywhere in the engine

Galaxy _S14 · 07-26-2013, 01:07 PM

I checked the compression good across all cylinders

Sent from my SPH-D710BST using Tapatalk 2

zombiewolf513 · 07-26-2013, 03:04 PM

Have you reset the ecu? I overheated once for about 10 seconds, never ran right again, turned out to be the ecu

Galaxy _S14 · 07-26-2013, 03:36 PM

No but it ran half assed for about a mile let of the gas n died.. Turned it over with out the plugs shot water out of the cylinders.. I just took the intake off (a bitch) The gasket broke in 4 places n the intake tunnels are soaked.. On 4 and 2. I don't think the head gasket blew

Sent from my SPH-D710BST using Tapatalk 2

07-26-2013, 12:20 PM	#1
Galaxy _S14 Leaky Injector Join Date: Jun 2013 Location: Memphis Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	95 240sx over heated now won't start.. On my way to work My radiator hose busted. It over heated bas before I could cut it off. Replaced hose filled with water and it turns over try to start but keeps cutting out.. Water in the exhaust but none in the oil? I noticed alot of steam coming from the intake... Intake gasket maybe.. Any help would be appreciated Sent from my SPH-D710BST using Tapatalk 2

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

07-26-2013, 01:04 PM	#2
Rich260z Zilvia Addict Join Date: Apr 2011 Location: Burbank, CA Posts: 621 Trader Rating: (8) Feedback Score: 8 reviews	Blown headgasket, you probably don't have any compression, or coolant is leaking everywhere in the engine

07-26-2013, 01:07 PM	#3
Galaxy _S14 Leaky Injector Join Date: Jun 2013 Location: Memphis Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	I checked the compression good across all cylinders Sent from my SPH-D710BST using Tapatalk 2

07-26-2013, 03:04 PM	#4
zombiewolf513 BANNED Join Date: Mar 2011 Location: AZ Age: 33 Posts: 1,682 Trader Rating: (6) Rides Gallery: zombiewolf513 Feedback Score: 6 reviews	Have you reset the ecu? I overheated once for about 10 seconds, never ran right again, turned out to be the ecu

07-26-2013, 03:36 PM	#5
Galaxy _S14 Leaky Injector Join Date: Jun 2013 Location: Memphis Posts: 82 Trader Rating: (0) Feedback Score: 0 reviews	No but it ran half assed for about a mile let of the gas n died.. Turned it over with out the plugs shot water out of the cylinders.. I just took the intake off (a bitch) The gasket broke in 4 places n the intake tunnels are soaked.. On 4 and 2. I don't think the head gasket blew Sent from my SPH-D710BST using Tapatalk 2