Steering rack/column U joint…. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Javi802 · 03-10-2014, 08:46 PM

So with my engine out of my car, i decided it might be nice to change the rubber column bushing to a solid one.

To shortly put it, it was a pain in my ass….

When installing the u joint that connects the rack to the lower steering column shaft, i installed the shaft 180 degrees of what it came out of the car..

For reference:

http://i69.photobucket.com/albums/i7...d/Untitled.jpg

Thats how it was before taking it out…. It is now 180 of that. As is the U joint.

I wouldn't figure this is a problem due to the shaft being only a straight piece of metal, and the u joint being able to spin freely in either direction, regardless of how it is mounted.

Will this be a problem?

Javi802 · 03-10-2014, 08:47 PM

edit edit edit edit

codyace · 03-12-2014, 05:52 PM

If the u joint was swapped top/bottom 180* you won't have any issue. If you spun the U joint and shaft 180* and re installed it, you're steering will be off big time.

03-10-2014, 08:46 PM	#1
Javi802 Zilvia Junkie Join Date: Jul 2012 Location: Oklahoma Age: 29 Posts: 470 Trader Rating: (10) Feedback Score: 10 reviews	Steering rack/column U joint…. So with my engine out of my car, i decided it might be nice to change the rubber column bushing to a solid one. To shortly put it, it was a pain in my ass…. When installing the u joint that connects the rack to the lower steering column shaft, i installed the shaft 180 degrees of what it came out of the car.. For reference: http://i69.photobucket.com/albums/i7...d/Untitled.jpg Thats how it was before taking it out…. It is now 180 of that. As is the U joint. I wouldn't figure this is a problem due to the shaft being only a straight piece of metal, and the u joint being able to spin freely in either direction, regardless of how it is mounted. Will this be a problem? Last edited by Javi802; 03-10-2014 at 10:49 PM..

03-10-2014, 08:47 PM	#2
Javi802 Zilvia Junkie Join Date: Jul 2012 Location: Oklahoma Age: 29 Posts: 470 Trader Rating: (10) Feedback Score: 10 reviews	edit edit edit edit Last edited by Javi802; 03-10-2014 at 10:49 PM..

03-12-2014, 05:52 PM	#3
codyace Post Whore! Join Date: Dec 2004 Location: Poconos, PA Age: 36 Posts: 8,030 Trader Rating: (58) Feedback Score: 58 reviews	If the u joint was swapped top/bottom 180* you won't have any issue. If you spun the U joint and shaft 180* and re installed it, you're steering will be off big time. __________________ *Want Air Conditioning in your SR20 Swapped car? Check out www.sr20acbrackets.com for more information! Quest Alternator Conversions for SR20!* Check my Group Buy! Tired of lousy internal gates? Go external wastegate with one of my manifolds, Check out my group buy

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode