Clutch question need help!!!!! - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

joshy240sxxx · 11-06-2008, 04:02 PM

hey guys sorry if this was already answered i did a quick search and dont have time to look in depth.

i just swapped my clutch and put everything back together.. my question is do i need to readjust the clutch pedal or travel ?!?!?!?!? if so does anyone have info or can give me a play by play.

thank you just need to get this done asap!!

joshy240sxxx · 11-06-2008, 04:57 PM

no one?,,,,,,,

apex · 11-06-2008, 05:03 PM

my question is do i need to readjust the clutch pedal or travel
no wait u took off the slave cylinder right and didnt
unhook the line to it if not ur golden pony boy
if u did u need to bleed it

joshy240sxxx · 11-06-2008, 06:00 PM

ya i know that but in some cars you adjust it at the pedal after you install a new clutch but some are self adjusting...

*fliprayzin240sx* · 11-07-2008, 07:46 AM

Bleed the clutch line...ALWAYS. Clutch line setup on S-chassis sucks due to the stock dampner. Adjusting the pedal is up to you. Some folks line the engagement higher, some like it low. Not that hard to adjust it, if you look behind the pedal, the shaft is locked into place by a 12mm nut. Loosen it, then you should be able to turn the shaft either by hand or with a pair of pliers. The more extended the shaft is, the higher the engagement point will be.

joshy240sxxx · 11-07-2008, 02:29 PM

thanks man thats what i was looking for.. but do you have to bleed it even tho i did not tamper with the fluid or anything?

japslapsilvia · 11-07-2008, 02:35 PM

Quote:

Originally Posted by joshy240sxxx

thanks man thats what i was looking for.. but do you have to bleed it even tho i did not tamper with the fluid or anything?

no u do not have to bleed

i would reccomend a flush and refill/bleed though.

gijoe69 · 11-08-2008, 06:19 PM

just bleed the clutch via 2 person or gravity bleed it, and see how you like the clutch engagement point at

joshy240sxxx · 11-15-2008, 03:12 PM

only need one person for a gravity.. but new problem my pedal likes to stick to the floor now and randomly dies. cant shift then after i pump it alot i can do it roughly.... i think it might be a slave cylinder but any input would help thanks.

***CrimsonRockett*** · 11-15-2008, 03:16 PM

If you have old clutch master/slave, I would recommend swapping both.

FR Nabco Tokico Clutch Master Cylinder Nissan 240SX

FR Nabco Tokico Clutch Slave Cylinder Nissan 240SX

Mine died on me in heavy traffic.

Pedal stuck to the floor and I couldn't shift out of gear.

Coasted off the freeway far enough to get off a street.

Swap them both and be worry free.

11-06-2008, 04:02 PM	#1
joshy240sxxx Leaky Injector Join Date: Jan 2007 Location: santa cruz CA Age: 31 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	Clutch question need help!!!!! hey guys sorry if this was already answered i did a quick search and dont have time to look in depth. i just swapped my clutch and put everything back together.. my question is do i need to readjust the clutch pedal or travel ?!?!?!?!? if so does anyone have info or can give me a play by play. thank you just need to get this done asap!!

11-06-2008, 05:03 PM	#3
apex Zilvia FREAK! Join Date: Aug 2004 Location: palm springs Posts: 1,566 Trader Rating: (44) Feedback Score: 44 reviews	my question is do i need to readjust the clutch pedal or travel no wait u took off the slave cylinder right and didnt unhook the line to it if not ur golden pony boy if u did u need to bleed it __________________ Red Rocket

11-07-2008, 07:46 AM	#5
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Bleed the clutch line...ALWAYS. Clutch line setup on S-chassis sucks due to the stock dampner. Adjusting the pedal is up to you. Some folks line the engagement higher, some like it low. Not that hard to adjust it, if you look behind the pedal, the shaft is locked into place by a 12mm nut. Loosen it, then you should be able to turn the shaft either by hand or with a pair of pliers. The more extended the shaft is, the higher the engagement point will be. __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-06-2008, 04:57 PM	#2
joshy240sxxx Leaky Injector Join Date: Jan 2007 Location: santa cruz CA Age: 31 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	no one?,,,,,,,

11-06-2008, 06:00 PM	#4
joshy240sxxx Leaky Injector Join Date: Jan 2007 Location: santa cruz CA Age: 31 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	ya i know that but in some cars you adjust it at the pedal after you install a new clutch but some are self adjusting...

11-07-2008, 02:29 PM	#6
joshy240sxxx Leaky Injector Join Date: Jan 2007 Location: santa cruz CA Age: 31 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	thanks man thats what i was looking for.. but do you have to bleed it even tho i did not tamper with the fluid or anything?

11-08-2008, 06:19 PM	#8
gijoe69 Zilvia Junkie Join Date: May 2003 Location: San Francisco, CA Age: 36 Posts: 366 Trader Rating: (1) Feedback Score: 1 reviews	just bleed the clutch via 2 person or gravity bleed it, and see how you like the clutch engagement point at

11-15-2008, 03:12 PM	#9
joshy240sxxx Leaky Injector Join Date: Jan 2007 Location: santa cruz CA Age: 31 Posts: 84 Trader Rating: (0) Feedback Score: 0 reviews	only need one person for a gravity.. but new problem my pedal likes to stick to the floor now and randomly dies. cant shift then after i pump it alot i can do it roughly.... i think it might be a slave cylinder but any input would help thanks.