OR Koni 8611 coilover setup for S13 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*e1_griego* · 01-31-2021, 11:50 AM

After nearly 10 years of faithful service, I wasted a bunch of money on an MCS setup so my trusty konis are for sale. The Koni shock inserts were new in 2016 (Koni 8611-1257 x4) and have probably 15 track days on them and maybe 2000 street miles since then. No leaks, bends, or frozen adjusters. These require z32 spindle in back.

The Koni setups have been well-documented on NissanRoadRacing.com and on here: https://zilvia.net/f/showthread.php?t=270829

The 8611-1257 is a double adjustable shock, meaning you can adjust rebound and compression separately.

I didn't clean them up for pictures, so they're dirty ( my garage is off a gravel alley so things get a bit dirtier than I want). I'll wipe them down before I ship, I just wanted it to be clear there were no leaks or anything.

The housing were made by Veilside180sx.

Camber plates and rear upper mounts are Tein -- the bearings don't feel brand new (ie they're not almost-frozen) but aren't flopping around and dead. No clunks or anything. I hogged out the inner part of the camber plate to eek out a bit more front camber at the plate.

The upper spring perches in front are the Vorshlag ones (that they won't sell separately any more..). That means there is a radial bearing in the top hat to allow rotation without trying to spin the bearing in the camber plate.

Front springs are 550# eibach, 6" long; rear springs are 400# eibach, 7" long. I was running stance helper springs with those but I pulled those and threw in the spare set of H&R helpers that I had on the shelf (50# rate, 2" long).

If I wasn't wasting money on MCS stuff this set would have been great for a few more years -- just bored and trying new things.

Looking for $2k.

I'll get some better pics but this is what I have right now.

*e1_griego* · 02-12-2021, 03:41 PM

Bump for nice shocks.

*e1_griego* · 02-27-2021, 07:10 PM

Still got 'em.

*e1_griego* · 03-09-2021, 11:31 PM

Slightly flexible on price but real real hard to beat these for the money.

*e1_griego* · 03-22-2021, 12:24 PM

Maybe I should put maxspeedingrod stickers on them.

*e1_griego* · 05-03-2021, 03:41 PM

Still got 'em!

rfs324 · 05-08-2021, 07:06 PM

Big fan of this setup. Wondering if priced too high now that ground control has a kit with the koni's new for less than 2k.

*e1_griego* · 05-08-2021, 07:31 PM

That kit is 8610s and sports, not 8611s.

I'm open to offers, too.

*e1_griego* · 06-10-2021, 08:37 AM

Monthly bump.

*e1_griego* · 07-11-2021, 08:22 AM

Another monthly bump. Open to offers!

01-31-2021, 11:50 AM	#1
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Koni 8611 coilover setup for S13 After nearly 10 years of faithful service, I wasted a bunch of money on an MCS setup so my trusty konis are for sale. The Koni shock inserts were new in 2016 (Koni 8611-1257 x4) and have probably 15 track days on them and maybe 2000 street miles since then. No leaks, bends, or frozen adjusters. These require z32 spindle in back. The Koni setups have been well-documented on NissanRoadRacing.com and on here: https://zilvia.net/f/showthread.php?t=270829 The 8611-1257 is a double adjustable shock, meaning you can adjust rebound and compression separately. I didn't clean them up for pictures, so they're dirty ( my garage is off a gravel alley so things get a bit dirtier than I want). I'll wipe them down before I ship, I just wanted it to be clear there were no leaks or anything. The housing were made by Veilside180sx. Camber plates and rear upper mounts are Tein -- the bearings don't feel brand new (ie they're not almost-frozen) but aren't flopping around and dead. No clunks or anything. I hogged out the inner part of the camber plate to eek out a bit more front camber at the plate. The upper spring perches in front are the Vorshlag ones (that they won't sell separately any more..). That means there is a radial bearing in the top hat to allow rotation without trying to spin the bearing in the camber plate. Front springs are 550# eibach, 6" long; rear springs are 400# eibach, 7" long. I was running stance helper springs with those but I pulled those and threw in the spare set of H&R helpers that I had on the shelf (50# rate, 2" long). If I wasn't wasting money on MCS stuff this set would have been great for a few more years -- just bored and trying new things. Looking for $2k. I'll get some better pics but this is what I have right now. Last edited by e1_griego; 03-02-2021 at 08:21 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

02-12-2021, 03:41 PM	#2
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Bump for nice shocks.

02-27-2021, 07:10 PM	#3
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Still got 'em.

03-09-2021, 11:31 PM	#4
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Slightly flexible on price but real real hard to beat these for the money.

03-22-2021, 12:24 PM	#5
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Maybe I should put maxspeedingrod stickers on them.

05-03-2021, 03:41 PM	#6
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Still got 'em!

05-08-2021, 07:06 PM	#7
rfs324 Leaky Injector Join Date: Oct 2018 Location: Wilmington, NC Posts: 121 Trader Rating: (0) Feedback Score: 0 reviews	Big fan of this setup. Wondering if priced too high now that ground control has a kit with the koni's new for less than 2k.

05-08-2021, 07:31 PM	#8
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	That kit is 8610s and sports, not 8611s. I'm open to offers, too.

06-10-2021, 08:37 AM	#9
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Monthly bump.

07-11-2021, 08:22 AM	#10
e1_griego Premium Member Join Date: Sep 2004 Location: Independence, Ore. Age: 36 Posts: 2,642 Trader Rating: (24) Feedback Score: 24 reviews	Another monthly bump. Open to offers!