Quote:
Originally Posted by tricky_ab
Glad to see this build is still going strong!
|
I will never let it die I promise that... lol
Quote:
Originally Posted by RAWGarage
keeping it trill for tx
|
Always keep it 100...
Quote:
Originally Posted by ka-titties
Because of the +9000mm spacer you're going to need
|
hahahaha... right.. But I really only need a 25mm rear and a 36mm front.. not that bad.. but could run a smaller front spacer, if I take some camber out of her...
Quote:
Originally Posted by Mitsubayati
I like the brake line job.
I have a few questions though.
1.What material is the black hard line made out of?
2. Where can I get the black hard line?
3. Are you making a 37 degree single flare and using a tube nut and sleeve to mate it to the AN fittings?
4. What flare tool are you using?
Thank you!
|
1. Its a 3/16" Double wall Steel Coil
2. You can get it from Jegs Part number 555-63060
3. correct.
4. Bought a flare tool from harbor Freight
Hope that helps some....
12-23-2015, 02:48 PM
Threaded Mode