September Special!!! Godspeed 18G Turbo Direct Bolt on for SR20 motor - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Fatboy Garage · 08-30-2010, 03:21 PM

September Special!!!

Godspeed 18G Turbo.

This turbo is Direct Bolt on/Replacement for SR20 Red/Black top, Come with all oil line fitting

Spec.

Bearing system: Journal Bearing
Compressor Wheel Diameter: 50.3 / 68mm
TURBINE Wheel Diameter: 49.2 / 56mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 300-380 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 600

We have the turbo Dynoed on one of our Local drifter car and famous pro am Driver Aurimas “Odi” Bakchis also using this turbo to compete all his Drifting event in Vegas

http://zilvia.net/f/tech-talk/323337...dyno-test.html

$360 Shipped to Lower 48 State and CA Buyer will have to pay 9.75% Sales Tax

Please PM for Payment Method.

Fatboy Garage Motorsport Inc
GODSPEED Project
2518 Continental Ave
El Monte CA 91733
P: 626-442-3988 ask for Ken
W:godpeedproject.com

Exas Spec D · 08-30-2010, 07:21 PM

Do you guys offer warranty if ever it's deffective or something?

projekt_s13 · 08-31-2010, 09:02 AM

Go get it christian! hahah

http://zilvia.net/f/tech-talk/323337...dyno-test.html

Here it says that it has a 1 year warranty

Csomme · 08-31-2010, 10:11 AM

Pshhhhh. Wow. sold.

Never thought I would be, but with warranty? love it.

Fatboy Garage · 08-31-2010, 10:21 AM

Quote:

Originally Posted by Exas Spec D

Do you guys offer warranty if ever it's deffective or something?

the turbo have one year warranty if you install it by ASE Certified tech.

Thanks

kbui · 08-31-2010, 03:48 PM

Who, what, and how do we send a payment to you? please let me know.thanks

Fatboy Garage · 08-31-2010, 05:02 PM

Quote:

Originally Posted by kbui

Who, what, and how do we send a payment to you? please let me know.thanks

PM sent!!!

odi · 09-01-2010, 11:55 AM

I earned my FD license running this turbo competing in several Pro Am series. Very awesome top end power!

I ran a t25 punched out to a t28 (compressor and exhaust wheel) and this turbo kicks much harder and pulls longer in the RPM range.

For that price, it's a no brainer.

Spencer dougherty · 09-02-2010, 02:29 AM

This Turbo is such a great value... i have installed it on a few sr's and made great numbers... pulls way harder then a T28r and much faster then a 28/71r.. feels like a disco potato.. we made 354hp on 91oct at 22psi and the turbo had more to give us... aslo made 246hp on 91 oct at 18 psi on anuther sr with more mods.. ill post up dyno sheets tomorrow

Orion840 · 09-02-2010, 08:24 AM

super deal im deff interested

Fatboy Garage · 09-02-2010, 10:13 AM

Quote:

Originally Posted by Spencer dougherty

This Turbo is such a great value... i have installed it on a few sr's and made great numbers... pulls way harder then a T28r and much faster then a 28/71r.. feels like a disco potato.. we made 354hp on 91oct at 22psi and the turbo had more to give us... aslo made 246hp on 91 oct at 18 psi on anuther sr with more mods.. ill post up dyno sheets tomorrow

Yup!!!

Whoever need install on this turbo and located around OC Area please go to SideWays Performance!!! they are our certified Tech.!!

Please give them a call!!

Exas Spec D · 09-06-2010, 09:49 PM

You guys still have them in stock right?

Fatboy Garage · 09-07-2010, 04:15 PM

Quote:

Originally Posted by Exas Spec D

You guys still have them in stock right?

Yup got 10 In stock

Thanks

Ken,S

Fatboy Garage · 09-08-2010, 05:15 PM

Here it the Dyno on our time attack 240sx

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 1st Pull

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 2nd Pull

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 3rd Pull

YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 4thd Pull

D.Adams · 09-08-2010, 10:59 PM

Need to know where to send payment..

clay9110 · 09-15-2010, 09:35 AM

AHHH I get paid oct 1st. Will you still offer the discounted price then?

Fatboy Garage · 09-15-2010, 11:49 AM

Quote:

Originally Posted by clay9110

AHHH I get paid oct 1st. Will you still offer the discounted price then?

Pm me for more info.

thanks

Fatboy Garage · 09-20-2010, 11:16 AM

Sold 10 already still have some left!!!

oewoko · 09-27-2010, 12:53 PM

paypalled!!!

Fatboy Garage · 09-28-2010, 10:58 AM

Quote:

Originally Posted by oewoko

paypalled!!!

got your payment, going out today!!

Thanks

gearhead290 · 09-29-2010, 07:13 AM

What fitting do you guys use for the oil return? I know it's a different fitting than my T25 had but is it the same as a GT series turbo or what? I have everything else fabbed up and the turbo on the car, the only thing stopping me from driving it is this stupid fitting! I can use either an AN -10 fitting or one that is threaded, I just need something because the one that comes with the kit doesn't work with my car (I need it to bend at 45* back towards the block).

Fatboy Garage · 09-29-2010, 10:59 AM

Quote:

Originally Posted by gearhead290

What fitting do you guys use for the oil return? I know it's a different fitting than my T25 had but is it the same as a GT series turbo or what? I have everything else fabbed up and the turbo on the car, the only thing stopping me from driving it is this stupid fitting! I can use either an AN -10 fitting or one that is threaded, I just need something because the one that comes with the kit doesn't work with my car (I need it to bend at 45* back towards the block).

you can cut the fitting that we provided, is this going in a S13/S14 Sr20?

1quk240 · 09-29-2010, 04:13 PM

Quote:

Originally Posted by Spencer dougherty

This Turbo is such a great value... i have installed it on a few sr's and made great numbers... pulls way harder then a T28r and much faster then a 28/71r.. feels like a disco potato.. we made 354hp on 91oct at 22psi and the turbo had more to give us... aslo made 246hp on 91 oct at 18 psi on anuther sr with more mods.. ill post up dyno sheets tomorrow

Something seems wrong about those #'s. My friend put down 332hp on a 2871 w/ cams and manafold @15psi. Doesn't make any sense putting down 354hp @22psi and then [email protected] w/ "more mods". Correct me if I am wrong. This does seem like a good deal on a spare turbo if needed

gearhead290 · 09-30-2010, 06:42 AM

Quote:

Originally Posted by Fatboy Garage

you can cut the fitting that we provided, is this going in a S13/S14 Sr20?

It's a KA-t. I ended up using this fitting Oil Return Flange with integrated -10 Flare for GT15 Through GT35R : atpturbo.com and doing a stainless braided return line.

Fatboy Garage · 10-01-2010, 11:33 AM

Last Day!!!!

clay9110 · 10-01-2010, 02:32 PM

Money Sent!!

1quk240 · 10-01-2010, 03:18 PM

Quote:

Originally Posted by 1quk240

Something seems wrong about those #'s. My friend put down 332hp on a 2871 w/ cams and manafold @15psi. Doesn't make any sense putting down 354hp @22psi and then [email protected] w/ "more mods". Correct me if I am wrong. This does seem like a good deal on a spare turbo if needed

Quote:

Originally Posted by Fatboy Garage

Last Day!!!!

soooo..i dont get an answer to my question?!

Z33dori · 10-01-2010, 07:18 PM

Quote:

Originally Posted by 1quk240

Something seems wrong about those #'s. My friend put down 332hp on a 2871 w/ cams and manafold @15psi. Doesn't make any sense putting down 354hp @22psi and then [email protected] w/ "more mods". Correct me if I am wrong. This does seem like a good deal on a spare turbo if needed

i think he meant 346 lol, i hope

1quk240 · 10-01-2010, 08:56 PM

Quote:

Originally Posted by Z33dori

i think he meant 346 lol, i hope

I was thinking the same thing but 4lbs psi will make more than 354hp especially if the other car has "more mods". And with and with the OP not posting or replying to my comments raises more concerns.

08-30-2010, 03:21 PM	#1
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 35 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	September Special!!! Godspeed 18G Turbo Direct Bolt on for SR20 motor September Special!!! Godspeed 18G Turbo. This turbo is Direct Bolt on/Replacement for SR20 Red/Black top, Come with all oil line fitting Spec. Bearing system: Journal Bearing Compressor Wheel Diameter: 50.3 / 68mm TURBINE Wheel Diameter: 49.2 / 56mm Turbine TRIM: 57 Turbine flange type flange: T25 Downpipe flange type : 240sx 5 bolt type Nozzle Area: 8cm² Cooling type : oil and water cooled. Horsepower rating: 300-380 hp BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR) Actuator set at : 14.5 PSI CFM: 600 We have the turbo Dynoed on one of our Local drifter car and famous pro am Driver Aurimas “Odi” Bakchis also using this turbo to compete all his Drifting event in Vegas http://zilvia.net/f/tech-talk/323337...dyno-test.html $360 Shipped to Lower 48 State and CA Buyer will have to pay 9.75% Sales Tax Please PM for Payment Method. Fatboy Garage Motorsport Inc GODSPEED Project 2518 Continental Ave El Monte CA 91733 P: 626-442-3988 ask for Ken W:godpeedproject.com

08-30-2010, 07:21 PM	#2
Exas Spec D Zilvia Junkie Join Date: Apr 2008 Location: Union City, CA Age: 34 Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	Do you guys offer warranty if ever it's deffective or something? __________________

08-31-2010, 09:02 AM	#3
projekt_s13 Post Whore! Join Date: Jul 2005 Location: Chico/Pittsburg, CA Age: 35 Posts: 2,801 Trader Rating: (5) Rides Gallery: projekt_s13 Feedback Score: 5 reviews	Go get it christian! hahah http://zilvia.net/f/tech-talk/323337...dyno-test.html Here it says that it has a 1 year warranty __________________

09-01-2010, 11:55 AM	#8
odi Leaky Injector Join Date: Jan 2009 Location: CA Age: 37 Posts: 130 Trader Rating: (0) Feedback Score: 0 reviews	I earned my FD license running this turbo competing in several Pro Am series. Very awesome top end power! I ran a t25 punched out to a t28 (compressor and exhaust wheel) and this turbo kicks much harder and pulls longer in the RPM range. For that price, it's a no brainer. __________________ BakchisMotorsports.com

09-06-2010, 09:49 PM	#12
Exas Spec D Zilvia Junkie Join Date: Apr 2008 Location: Union City, CA Age: 34 Posts: 449 Trader Rating: (0) Feedback Score: 0 reviews	You guys still have them in stock right? __________________

08-31-2010, 10:11 AM	#4
Csomme Zilvia FREAK! Join Date: Feb 2009 Location: north carolinazzz Age: 30 Posts: 1,009 Trader Rating: (4) Feedback Score: 4 reviews	Pshhhhh. Wow. sold. Never thought I would be, but with warranty? love it.

08-31-2010, 03:48 PM	#6
kbui Zilvia Junkie Join Date: Jul 2007 Location: albuquerque, new mexico Age: 34 Posts: 342 Trader Rating: (12) Feedback Score: 12 reviews	Who, what, and how do we send a payment to you? please let me know.thanks

09-02-2010, 02:29 AM	#9
Spencer dougherty Post Whore! Join Date: Feb 2007 Location: Santa Ana CA SideWays Performance 1(714)330-0021 Age: 38 Posts: 2,554 Trader Rating: (65) Rides Gallery: Spencer dougherty Feedback Score: 65 reviews	This Turbo is such a great value... i have installed it on a few sr's and made great numbers... pulls way harder then a T28r and much faster then a 28/71r.. feels like a disco potato.. we made 354hp on 91oct at 22psi and the turbo had more to give us... aslo made 246hp on 91 oct at 18 psi on anuther sr with more mods.. ill post up dyno sheets tomorrow

09-02-2010, 08:24 AM	#10
Orion840 Join Date: Aug 2010 Location: Earth Age: 41 Posts: 4 Trader Rating: (0) Feedback Score: 0 reviews	super deal im deff interested

09-08-2010, 05:15 PM	#14
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 35 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Here it the Dyno on our time attack 240sx YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 1st Pull YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 2nd Pull YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 3rd Pull YouTube - Godspeed Time Attack 240SX S14 18G Turbo Dyno 4thd Pull

09-08-2010, 10:59 PM	#15
D.Adams Post Whore! Join Date: Feb 2007 Location: Lake Havasu City Arizona Age: 37 Posts: 2,587 Trader Rating: (9) Feedback Score: 9 reviews	Need to know where to send payment.. __________________ “About the time we think we can make ends meet, somebody moves the ends.” ―Herbert Hoover The build http://zilvia.net/f/builds-builds-on...u-city-az.html Owner of NVS Fabrications

09-15-2010, 09:35 AM	#16
clay9110 Leaky Injector Join Date: Oct 2008 Location: belleville, il Age: 30 Posts: 129 Trader Rating: (0) Feedback Score: 0 reviews	AHHH I get paid oct 1st. Will you still offer the discounted price then?

09-20-2010, 11:16 AM	#18
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 35 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Sold 10 already still have some left!!!

09-27-2010, 12:53 PM	#19
oewoko Zilvia Member Join Date: Apr 2002 Location: new jersey Posts: 154 Trader Rating: (2) Feedback Score: 2 reviews	paypalled!!!

09-29-2010, 07:13 AM	#21
gearhead290 Zilvia Member Join Date: May 2004 Location: Sioux Falls, SD Posts: 163 Trader Rating: (6) Feedback Score: 6 reviews	What fitting do you guys use for the oil return? I know it's a different fitting than my T25 had but is it the same as a GT series turbo or what? I have everything else fabbed up and the turbo on the car, the only thing stopping me from driving it is this stupid fitting! I can use either an AN -10 fitting or one that is threaded, I just need something because the one that comes with the kit doesn't work with my car (I need it to bend at 45* back towards the block). Last edited by gearhead290; 09-29-2010 at 07:45 AM..

10-01-2010, 11:33 AM	#25
Fatboy Garage Post Whore! Join Date: Jul 2009 Location: South El Monte Age: 35 Posts: 3,447 Trader Rating: (27) Feedback Score: 27 reviews	Last Day!!!!

10-01-2010, 02:32 PM	#26
clay9110 Leaky Injector Join Date: Oct 2008 Location: belleville, il Age: 30 Posts: 129 Trader Rating: (0) Feedback Score: 0 reviews	Money Sent!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode