My S14 kouki rear valances are finally done!!! - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

chinabean · 09-20-2011, 10:58 PM

$200+ I'm guessing?

gunmetalr32 · 09-20-2011, 11:51 PM

Quote:

Originally Posted by E Double

So if you are going to be providing a complete install kit with these, what are we looking at as far as cost? several people have asked, yet there has been no answer so far.

yes I'm throwing in a complete install kit as well.. I put a lot of time and money in this project I'm not going to skimp out on a few pieces. Since these valances will reflect my reputation on the forum, I want to have them as complete with the highest quality possible. As of the price I don't have one yet.

twistedsymphony · 09-21-2011, 09:30 AM

Is it possible to make a version of these with just the lower part and still have it fit right?

As in, cutting it along the lowest point of the indent so it no longer has the flat part up against the body.

If these are cheep enough I'd be tempted to buy one just to try it.

s14unimog · 09-21-2011, 09:34 AM

Quote:

Originally Posted by gunmetalr32

Yes that's right my valances are done...

Right on man! I'm running the Zenki aero on mine b/c, well, it's a zenki but if I wasn't I would hit you up. Way to do something the best it can be done.

I fell ya on missing those J-Lines, I'm running 7SL2's and love them

gunmetalr32 · 09-21-2011, 08:09 PM

i took a early out so i can take some pictures on the fitment and a quick how to install. i got a better camera

ok first you need a jdm kouki rear bumper, rear valances ,hardware and 3m double sided tape

here is what you need to install
hardware

3m double sided tape (don't go cheap and get anything else)

1/2 an inch is oem and is what i recommend as well

then find the mounting locations (where the rear mud flap would mount to)

then add the plastic locking fasteners

there is anther mounting location under the rear quarter panel.

remove the plastic cap to reveal the mounting hole

add the plastic locking fastener

this is where the mounting bracket is going to mount to

THEN YOU CLEAN THE VALANCES WITH 3M CLEANING/ADHESIVE BOUNDING WIPES AND APPLY 3M DOUBLE SIDED TAPE WHERE THE VALANCES AND THE BODY MEET!!!!
______ NO PICTURES YET..... SORRY_______

screw in valances

mounting bracket underneath

mounting locations where the mud flaps would bolt up to

NOTICE THAT ONLY ONE HOLE LINES UP.. THESE ARE (OEM VALANCES) AND THE OTHER HOLE IS NOT USED.. THE OTHER 3 MOUNTING HOLE AND THE 3M DOUBLE SIDED TAPE WILL HOLD THE VALANCES IN PLACE.

underneath the at the other end of the valances you drill a hole in the bumper

and add the plastic locking push plugs

here is how it fits with out the last plastic locking push plug

(OEM)

without pressure

these are mine

without pressure

silnv · 09-21-2011, 08:26 PM

Very nice work! I will be needing a set soon, so if priced fairly I would take a set too.

gunmetalr32 · 09-21-2011, 08:45 PM

Quote:

Originally Posted by twistedsymphony

Is it possible to make a version of these with just the lower part and still have it fit right?

As in, cutting it along the lowest point of the indent so it no longer has the flat part up against the body.

If these are cheep enough I'd be tempted to buy one just to try it.

i think they will leave a big gap.. the way they are made it would look like it would need to be molded inwards

Quote:

Originally Posted by s14unimog

Right on man! I'm running the Zenki aero on mine b/c, well, it's a zenki but if I wasn't I would hit you up. Way to do something the best it can be done.

I fell ya on missing those J-Lines, I'm running 7SL2's and love them

i just hope people see that these are made with high quality materials and are made one at a time, with man hands. these are not cheap Chinese stuff .. quality is #1.. and people give me shit all the time for selling my jlines.. i miss those things

Quote:

Originally Posted by silnv

Very nice work! I will be needing a set soon, so if priced fairly I would take a set too.

go kouki!!!

snmlmz · 09-23-2011, 03:31 PM

You for sure have my utmost respect and I totally commend you for going above and beyond man good job! they look legit

ckw · 09-25-2011, 01:12 AM

Quote:

Originally Posted by gunmetalr32

Because of you I actually made these.. When I was about to quit and when I said fuck it I just want them on my car already... You kept asking me for updates and I was just going to tell you it's not happening.. But that changed my mind and I sold wheels to fund this..
Thanks for the support.. And you are getting the 1st set. I couldn't be happier on the way they came out.. Again thanks.u

If there was a "like" button like there is on Facebook, I would like this post.

Thanks for putting up with my many, many PMs, haha.

Bushido · 09-25-2011, 07:40 AM

Make kouki 180sx lips!!!!!

Please!!

gunmetalr32 · 09-25-2011, 12:43 PM

Quote:

Originally Posted by Bushido

Make kouki 180sx lips!!!!!

Please!!

That's another part I was thinking about making

Creeper · 09-26-2011, 10:11 PM

Let me know when there for sale and for how much, Good Job bro. They look pretty darn good.

Kom3t · 09-27-2011, 01:42 AM

I would totally buy the type x lip also!! Those are Soo hard and expensive to come by

chinabean · 09-27-2011, 03:36 AM

zenki rear

gunmetalr32 · 09-27-2011, 06:32 AM

Quote:

Originally Posted by Kom3t

I would totally buy the type x lip also!! Those are Soo hard and expensive to come by

I just need a lip in very good condition.. And I'll start making them

Quote:

Originally Posted by chinabean

zenki rear

Sorry I just don't see that many people needing this part.. If you can get me 10 people that will buy it and put a deposit I may consider it

LOADING... · 09-30-2011, 05:09 AM

damn i would be sooooooo interested in this.... but i live in hawaii. and most sellers don't like to ship to hawaii =/

gunmetalr32 · 09-30-2011, 07:59 PM

I already shipped some to hawaii.. Not a problem

*Wake* · 09-30-2011, 08:17 PM

Do kouki s13 lips

And silvia lips that fit better than pignose lips.
I will personally send you a good condition complete pignose lip that you can cut up to make molds if you make a decent silvia lip out of it.

guarantee I can either find 10 people for a deposit, or pay it myself.

RPS13_NISMO KNIGHT · 09-30-2011, 08:24 PM

Damn very good work bro I give u props for being patient and taking ur time and actually doing the right way

EsChassisLove · 09-30-2011, 09:22 PM

Quote:

Originally Posted by gunmetalr32

I just need a lip in very good condition.. And I'll start making them

Sorry I just don't see that many people needing this part.. If you can get me 10 people that will buy it and put a deposit I may consider it

You have got to be joking?

Navan rears sell quicker than a 2 hour midnight session with Beyonce.

gunmetalr32 · 09-30-2011, 09:24 PM

Quote:

Originally Posted by WakeBHR

Do kouki s13 lips

And silvia lips that fit better than pignose lips.
I will personally send you a good condition complete pignose lip that you can cut up to make molds if you make a decent silvia lip out of it.

guarantee I can either find 10 people for a deposit, or pay it myself.

Mmmm.. I would need a clean silvia front bumper.too but that could be a good idea

Quote:

Originally Posted by RPS13_NISMO KNIGHT

Damn very good work bro I give u props for being patient and taking ur time and actually doing the right way

thanks man I appreciate it.. A lot of love went into this.. Next I'm thinking about making a front lip.. I just bought a greddy lip yesterday and I think I'm going to modify it

bardabe · 09-30-2011, 11:01 PM

When you are done and producing these, start making OEM Silvia Rear valances for S13 coupes

*Wake* · 09-30-2011, 11:07 PM

I was going to suggest that but figured he wouldnt since so many people do already.

Making ones that dont fit like complete obliterated ass could be profitable though.

2402NV · 10-01-2011, 04:20 PM

I'll be interested in a set whenever you have a price.

brewster240 · 10-01-2011, 04:37 PM

good stuff. pm when they are available.

Smurf_240SX · 10-01-2011, 04:48 PM

Wow these look really good!

ka-titties · 10-01-2011, 05:37 PM

+1 on Navan aero

gunmetalr32 · 10-01-2011, 05:56 PM

Quote:

Originally Posted by bardabe

When you are done and producing these, start making OEM Silvia Rear valances for S13 coupes

they are already done. i shipped a few already .. im just waiting on their reviews. this is my 1st product and i want to make sure everyone is happy with them.

and the s13 rear valances .. a few people already make them.. and if i would make them since it's 3 pieces price would be in the $290-330 range

Quote:

Originally Posted by WakeBHR

I was going to suggest that but figured he wouldnt since so many people do already.

Making ones that dont fit like complete obliterated ass could be profitable though.

yes very true.. all these company's make awful fitting ones. thats why i wanted to make my s14 kouki valances..

look at these and look at mine..

S14 Kouki Vanquish OEM Style Rear Valances FRP Made in Japan

Quote:

Originally Posted by 2402NV

I'll be interested in a set whenever you have a price.

pm me

Quote:

Originally Posted by brewster240

good stuff. pm when they are available.

pm me

Quote:

Originally Posted by Smurf_240SX

Wow these look really good!

thanks .. i actually try... i care about quality and fitment. i use high quality materials. these are made by men with man hands..

gunmetalr32 · 10-02-2011, 06:23 PM

Quote:

Originally Posted by chinabean

zenki rear

Quote:

Originally Posted by EsChassisLove

You have got to be joking?

Navan rears sell quicker than a 2 hour midnight session with Beyonce.

I see them sell for $165 and they come up more often than kouki valances... If I would make the price would be around $230 I don't think it would be worth it

gunmetalr32 · 10-02-2011, 06:35 PM

Opps double post..

09-20-2011, 10:58 PM	#31
chinabean Zilvia Addict Join Date: Dec 2009 Location: in burning embers Posts: 655 Trader Rating: (3) Feedback Score: 3 reviews	$200+ I'm guessing? __________________ Zenki Love - I spray paint my stock 15" hubs teal and rockillest/supreme/obey stickers on my car.

09-21-2011, 09:30 AM	#33
twistedsymphony Zilvia Junkie Join Date: Aug 2007 Location: NH Age: 38 Posts: 399 Trader Rating: (19) Feedback Score: 19 reviews	Is it possible to make a version of these with just the lower part and still have it fit right? As in, cutting it along the lowest point of the indent so it no longer has the flat part up against the body. If these are cheep enough I'd be tempted to buy one just to try it. __________________ Everything you need to know about the S-Chassis -- CollectorsEdition.org -- \| -- 240sxONE.com --

09-25-2011, 07:40 AM	#40
Bushido Post Whore! Join Date: Jun 2003 Location: SFL Posts: 3,562 Trader Rating: (10) Feedback Score: 10 reviews	Make kouki 180sx lips!!!!! Please!! __________________

09-27-2011, 03:36 AM	#44
chinabean Zilvia Addict Join Date: Dec 2009 Location: in burning embers Posts: 655 Trader Rating: (3) Feedback Score: 3 reviews	zenki rear __________________ Zenki Love - I spray paint my stock 15" hubs teal and rockillest/supreme/obey stickers on my car.

09-30-2011, 08:17 PM	#48
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 38 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	Do kouki s13 lips And silvia lips that fit better than pignose lips. I will personally send you a good condition complete pignose lip that you can cut up to make molds if you make a decent silvia lip out of it. guarantee I can either find 10 people for a deposit, or pay it myself. __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

09-21-2011, 08:09 PM	#35
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	i took a early out so i can take some pictures on the fitment and a quick how to install. i got a better camera ok first you need a jdm kouki rear bumper, rear valances ,hardware and 3m double sided tape here is what you need to install hardware 3m double sided tape (don't go cheap and get anything else) 1/2 an inch is oem and is what i recommend as well then find the mounting locations (where the rear mud flap would mount to) then add the plastic locking fasteners there is anther mounting location under the rear quarter panel. remove the plastic cap to reveal the mounting hole add the plastic locking fastener this is where the mounting bracket is going to mount to THEN YOU CLEAN THE VALANCES WITH 3M CLEANING/ADHESIVE BOUNDING WIPES AND APPLY 3M DOUBLE SIDED TAPE WHERE THE VALANCES AND THE BODY MEET!!!! ______ NO PICTURES YET..... SORRY_______ screw in valances mounting bracket underneath mounting locations where the mud flaps would bolt up to NOTICE THAT ONLY ONE HOLE LINES UP.. THESE ARE (OEM VALANCES) AND THE OTHER HOLE IS NOT USED.. THE OTHER 3 MOUNTING HOLE AND THE 3M DOUBLE SIDED TAPE WILL HOLD THE VALANCES IN PLACE. underneath the at the other end of the valances you drill a hole in the bumper and add the plastic locking push plugs here is how it fits with out the last plastic locking push plug (OEM) without pressure these are mine without pressure

09-21-2011, 08:26 PM	#36
silnv Zilvia FREAK! Join Date: Dec 2002 Location: Marietta, OH Age: 39 Posts: 1,093 Trader Rating: (39) Feedback Score: 39 reviews	Very nice work! I will be needing a set soon, so if priced fairly I would take a set too.

09-23-2011, 03:31 PM	#38
snmlmz Join Date: Mar 2011 Location: Los Angeles Age: 29 Posts: 32 Trader Rating: (1) Feedback Score: 1 reviews	You for sure have my utmost respect and I totally commend you for going above and beyond man good job! they look legit

09-26-2011, 10:11 PM	#42
Creeper Join Date: Mar 2009 Location: Los Angeles, California Age: 36 Posts: 26 Trader Rating: (0) Feedback Score: 0 reviews	Let me know when there for sale and for how much, Good Job bro. They look pretty darn good.

09-27-2011, 01:42 AM	#43
Kom3t Leaky Injector Join Date: Oct 2008 Location: Saint Paul, MN Posts: 119 Trader Rating: (2) Feedback Score: 2 reviews	I would totally buy the type x lip also!! Those are Soo hard and expensive to come by

09-30-2011, 05:09 AM	#46
LOADING... Join Date: Dec 2010 Location: Honolulu,HI Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	damn i would be sooooooo interested in this.... but i live in hawaii. and most sellers don't like to ship to hawaii =/

09-30-2011, 07:59 PM	#47
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	I already shipped some to hawaii.. Not a problem

09-30-2011, 08:24 PM	#49
RPS13_NISMO KNIGHT Zilvia Member Join Date: Oct 2006 Location: LOS ANGELES Age: 34 Posts: 154 Trader Rating: (0) Feedback Score: 0 reviews	Damn very good work bro I give u props for being patient and taking ur time and actually doing the right way

09-30-2011, 11:01 PM	#52
bardabe Post Whore! Join Date: Aug 2005 Location: SoCal Age: 31 Posts: 4,716 Trader Rating: (10) Rides Gallery: bardabe Feedback Score: 10 reviews	When you are done and producing these, start making OEM Silvia Rear valances for S13 coupes __________________ Review Thread

09-30-2011, 11:07 PM	#53
Wake Premium Member Join Date: Dec 2003 Location: Santa Cruz, ca Age: 38 Posts: 6,699 Trader Rating: (8) Feedback Score: 8 reviews	I was going to suggest that but figured he wouldnt since so many people do already. Making ones that dont fit like complete obliterated ass could be profitable though. __________________ S.P.P.S. Member #00 CoUpe LOve Member #00

10-01-2011, 04:20 PM	#54
2402NV Leaky Injector Join Date: Jul 2010 Location: Miami Age: 33 Posts: 125 Trader Rating: (2) Feedback Score: 2 reviews	I'll be interested in a set whenever you have a price. __________________

10-01-2011, 04:37 PM	#55
brewster240 Zilvia FREAK! Join Date: Dec 2006 Location: tampa bay, fl Age: 38 Posts: 1,042 Trader Rating: (2) Feedback Score: 2 reviews	good stuff. pm when they are available.

10-01-2011, 04:48 PM	#56
Smurf_240SX Zilvia Addict Join Date: Aug 2006 Location: So Cal- I.E Age: 32 Posts: 879 Trader Rating: (9) Feedback Score: 9 reviews	Wow these look really good! __________________ FS OEM RB25 PARTS

10-01-2011, 05:37 PM	#57
ka-titties Zilvia FREAK! Join Date: Oct 2009 Location: Near that guy you know Posts: 1,561 Trader Rating: (11) Feedback Score: 11 reviews	+1 on Navan aero

10-02-2011, 06:35 PM	#60
gunmetalr32 Post Whore! Join Date: Jan 2008 Location: oxnard,CA Age: 34 Posts: 3,077 Trader Rating: (14) Feedback Score: 14 reviews	Opps double post..

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode