CA 1997 Nissan 240sx SE - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

DUDEIDONTHAVEA240 · 11-04-2016, 02:09 PM

1997 Nissan 240sx SE
Clean Georgia title
(Car is currently located in San Diego, California)

This car came factory with an automatic transmission, power windows, power locks, power mirrors & no sunroof. I have owned the car since 2009 & originally wanted a fun daily so I converted it into a manual transmission and swapped in a built KA24DET. I drove that for a while, had a throttle body screw come loose and blow my motor up

. My intention was to re-build a stout rb25det and possibly drag race it on the weekends. Life happened, I am now a proud father of a beautiful little girl and my priorities have shifted hence the reason for selling. Overall the car is in excellent condition. This is a project car and will need to be towed. This car is NOT running. Feel free to contact me via this listing, phone/text (619)739-3296 or email at [email protected] Asking price is $8,000 OBO.

Please check out the imgur album. There are 181 images of the car, items, paperwork, etc.

LINK TO FULL ALBUM
http://imgur.com/a/MzADb

*-*-*MISSING PARTS*-*-*
MAF
Throttle body
Downpipe

Motor/Drivetrain:

!!MOTOR HAS SEEN NO FLUIDS !!

-RB25DET Series 1 motor w/ RB25 5 speed transmission
-All new OEM Gaskets
-Cometic head gasket
-Nissan N1 oil pump
-Nissan N1 water pump
-ACL bearings
-CP Pistons
-Manley Rods
-ARP head studs
-ARP main studs
-Raw Brokerage Crank Collar / Professionally installed by Car Parts Machine
-Tomei Poncams 256/256
-Tomei adjustable cam gear exhaust
-Greddy Intake manifold / painted with VHT
-ACT 350z 350mm clutch
-Exedy Billet Chromoly Flywheel
-Zerolift motor mounts/trans mount/ 1 piece steel driveshaft
-Megan racing engine and transmission mounts
-J30 differential

Machine shop work (Vat clean, block report, crank report, polish, alignbore, deck inline, bore and hone, plugs, balance rotating assembly, fit pin + mount piston, machine and install pump drive, resurface, file fit rings) All work done by Car Parts Machine in El Paso TX.

Fuel:
-Walboro 255 in tank
- -8 AN Braided Fuel Hose/Feed/Fittings Tank to Engine
- -6 AN Braided Fuel Hose/Return
- Bulk head Fittings installed at the fuel tank cap
-Russell Competition 40 Micron Inline fuel filter installed on feed line

Electrical:
-Battery relocated to the trunk with the main power running through the interior of the car.

Cooling:
-Koyo 3 Row Aluminum Radiator
-Front mount intercooler w/piping
-Aluminum Over flow tank
-Aluminum Reservoir for Power Steering with AN fittings & Nylon Black braided lines

Suspension:
-KYB AGX springs and struts
-SPL aluminum subframe collars

Wheels :
-350z wheels (x4) in fair condition w/ tires that are only good as rollers
-Weld Prostar 15x8 (x2) 9/10 condition w/ Mickey Thompson ET Streets 26x10.5. Currently mounted on the car.

Interior :
-95 240sx seats front and rear
-Kenwood KDC138 Headunit
-Nardi Sport Rally Deep Corn 330mm (black with red stitching)
-NRG Short hub black
-NRG quick release 2.5 black/black

Extras:
-Carbon fiber front cover and coil pack cover for rb25
-Stainless BRM exhaust w/ Magnaflow resonator/muffler (used from KA setup)
-Various Stainless 3" Mandrel bent piping w/ flanges
-HKS SSQv3 BOV (x2)
-ISIS short throw shifter
-OEM brand new driver side upper & lower door hinges
-Bosch 044 external fuel pump
-AEM 3.5 bar map sensor
-All Components to add A/C
-AEM serial gauge with complete harness and silver faceplate (included with car)
-Summit Oil cooler Setup / -10 an fittings & Nylon Black braided lines (included with car)

Also for sale:
-PTE 1600cc injectors x6

mogli9000 · 11-04-2016, 02:23 PM

Interested in parting the welds wheels?

DUDEIDONTHAVEA240 · 11-04-2016, 02:26 PM

Possibly in the future, but as of now I am trying to sell everything together if I can.

str84rme2u · 11-04-2016, 10:40 PM

But if you do sell DUDEUWONTHAVEA240 playing good deal

Jarom717 · 11-06-2016, 05:37 PM

What a great deal. Just buying a clean stock kouki will run you close to that asking price. Add a built rb25 in it too!.... To bad you live all the way in Georgia. GLWS

Sent from my SAMSUNG-SM-G920A using Tapatalk

DUDEIDONTHAVEA240 · 11-07-2016, 11:35 PM

Thanks. The car is actually located in San Diego, California. Edited the post to reflect the correct information.

DUDEIDONTHAVEA240 · 11-11-2016, 12:24 PM

Bump. Please ask any questions, and also if you have any feedback on the sale (priced to high, different pictures, etc.) it would be greatly appreciated.
Happy Veterans Day!

DUDEIDONTHAVEA240 · 11-15-2016, 01:04 AM

Bump. I have a potential buyer for the shell if anyone is interested in the drivetrain. Not going to part unless both parties are locked into the deal. Thanks.

DUDEIDONTHAVEA240 · 11-22-2016, 05:43 PM

Price drop. Thanks for looking.

DUDEIDONTHAVEA240 · 11-26-2016, 04:36 PM

Bump. Thanks for looking.

11-04-2016, 02:09 PM	#1
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	1997 Nissan 240sx SE 1997 Nissan 240sx SE Clean Georgia title (Car is currently located in San Diego, California) This car came factory with an automatic transmission, power windows, power locks, power mirrors & no sunroof. I have owned the car since 2009 & originally wanted a fun daily so I converted it into a manual transmission and swapped in a built KA24DET. I drove that for a while, had a throttle body screw come loose and blow my motor up . My intention was to re-build a stout rb25det and possibly drag race it on the weekends. Life happened, I am now a proud father of a beautiful little girl and my priorities have shifted hence the reason for selling. Overall the car is in excellent condition. This is a project car and will need to be towed. This car is NOT running. Feel free to contact me via this listing, phone/text (619)739-3296 or email at [email protected] Asking price is $8,000 OBO. Please check out the imgur album. There are 181 images of the car, items, paperwork, etc. LINK TO FULL ALBUM http://imgur.com/a/MzADb --MISSING PARTS-- MAF Throttle body Downpipe Motor/Drivetrain: !!MOTOR HAS SEEN NO FLUIDS !! -RB25DET Series 1 motor w/ RB25 5 speed transmission -All new OEM Gaskets -Cometic head gasket -Nissan N1 oil pump -Nissan N1 water pump -ACL bearings -CP Pistons -Manley Rods -ARP head studs -ARP main studs -Raw Brokerage Crank Collar / Professionally installed by Car Parts Machine -Tomei Poncams 256/256 -Tomei adjustable cam gear exhaust -Greddy Intake manifold / painted with VHT -ACT 350z 350mm clutch -Exedy Billet Chromoly Flywheel -Zerolift motor mounts/trans mount/ 1 piece steel driveshaft -Megan racing engine and transmission mounts -J30 differential Machine shop work (Vat clean, block report, crank report, polish, alignbore, deck inline, bore and hone, plugs, balance rotating assembly, fit pin + mount piston, machine and install pump drive, resurface, file fit rings) All work done by Car Parts Machine in El Paso TX. Fuel: -Walboro 255 in tank - -8 AN Braided Fuel Hose/Feed/Fittings Tank to Engine - -6 AN Braided Fuel Hose/Return - Bulk head Fittings installed at the fuel tank cap -Russell Competition 40 Micron Inline fuel filter installed on feed line Electrical: -Battery relocated to the trunk with the main power running through the interior of the car. Cooling: -Koyo 3 Row Aluminum Radiator -Front mount intercooler w/piping -Aluminum Over flow tank -Aluminum Reservoir for Power Steering with AN fittings & Nylon Black braided lines Suspension: -KYB AGX springs and struts -SPL aluminum subframe collars Wheels : -350z wheels (x4) in fair condition w/ tires that are only good as rollers -Weld Prostar 15x8 (x2) 9/10 condition w/ Mickey Thompson ET Streets 26x10.5. Currently mounted on the car. Interior : -95 240sx seats front and rear -Kenwood KDC138 Headunit -Nardi Sport Rally Deep Corn 330mm (black with red stitching) -NRG Short hub black -NRG quick release 2.5 black/black Extras: -Carbon fiber front cover and coil pack cover for rb25 -Stainless BRM exhaust w/ Magnaflow resonator/muffler (used from KA setup) -Various Stainless 3" Mandrel bent piping w/ flanges -HKS SSQv3 BOV (x2) -ISIS short throw shifter -OEM brand new driver side upper & lower door hinges -Bosch 044 external fuel pump -AEM 3.5 bar map sensor -All Components to add A/C -AEM serial gauge with complete harness and silver faceplate (included with car) -Summit Oil cooler Setup / -10 an fittings & Nylon Black braided lines (included with car) Also for sale: -PTE 1600cc injectors x6 Last edited by DUDEIDONTHAVEA240; 11-22-2016 at 05:43 PM..

11-04-2016, 02:23 PM	#2
mogli9000 Nissanaholic! Join Date: Mar 2012 Location: Slums of Shaolin Age: 27 Posts: 1,819 Trader Rating: (68) Feedback Score: 68 reviews	Interested in parting the welds wheels? __________________ Straight Outta The Slums of Shaolin

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

11-04-2016, 02:26 PM	#3
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	Possibly in the future, but as of now I am trying to sell everything together if I can.

11-04-2016, 10:40 PM	#4
str84rme2u Leaky Injector Join Date: Jul 2013 Location: NorCal Age: 32 Posts: 124 Trader Rating: (8) Feedback Score: 8 reviews	But if you do sell DUDEUWONTHAVEA240 playing good deal

11-06-2016, 05:37 PM	#5
Jarom717 Zilvia Member Join Date: Oct 2014 Location: Hawaii Posts: 190 Trader Rating: (1) Feedback Score: 1 reviews	What a great deal. Just buying a clean stock kouki will run you close to that asking price. Add a built rb25 in it too!.... To bad you live all the way in Georgia. GLWS Sent from my SAMSUNG-SM-G920A using Tapatalk

11-07-2016, 11:35 PM	#6
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	Thanks. The car is actually located in San Diego, California. Edited the post to reflect the correct information.

11-11-2016, 12:24 PM	#7
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	Bump. Please ask any questions, and also if you have any feedback on the sale (priced to high, different pictures, etc.) it would be greatly appreciated. Happy Veterans Day!

11-15-2016, 01:04 AM	#8
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	Bump. I have a potential buyer for the shell if anyone is interested in the drivetrain. Not going to part unless both parties are locked into the deal. Thanks.

11-22-2016, 05:43 PM	#9
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	Price drop. Thanks for looking.

11-26-2016, 04:36 PM	#10
DUDEIDONTHAVEA240 Zilvia Member Join Date: Jun 2005 Location: killa cali Posts: 166 Trader Rating: (3) Feedback Score: 3 reviews	Bump. Thanks for looking.