NISR20MO

NAME: Alex
Location: Raleigh, NC
Contact: PM, skizifiziks(at)gmail.com, (919)7O4-67O4
Shipping and Pricing: Prices are OBO and do not include shipping
Payment: Trades considered, CASH is KING, Paypal +2% (I will split fees w/ buyer), CC +3% (in person only)

Alright, up for grabs is my response oriented SR set-up, I was planning to assemble it as a temporary motor for the summer season. Since my shell is not quite done yet, and since this was going to be strictly temporary here it is. I bought the SR already swapped mostly-stock and running in a S14 and drove it on the stock T25 a few hundred miles before stripping and parting that car and tearing the SR down for upgrades. It was on a converted JDM harness, running stock tune, maf and injectors, a FMIC was the only mod.

I feel my prices are fair but I am open to offers, if something seems out of line feel free to PM me, please keep negativity out of my thread and don't waste my time if you don't have any money/worthwhile trades. Any shipped parts would be sent UPS w/ tracking and insurance to cover their value, unless we agree to a different option.

Trades I would consider include LSx swap parts, T56, aftermarket LS parts, legit seats (Bride or Status), Cor Integration tension rods and sway bar, Whiteline 22mm rear swaybar, 2 way diff's (S14 if in pumpkin already), Origin roof spoiler, Vertex S14 zenki eyelids and trunk lip, Legit Nardi Deep Corn - perforated leather 350mm silver spokes only.

1) *NEW* Genuine OEM S15 Spec R 6 Speed M/T DBB Turbo, 14411-91F00, GT2560R - SOLD

2) *NEW* Cobb T/GT 25/28 wastegate delete - $40

3) *NEW* S15 Turbo oil drain tube - SOLD

4) *NEW* PBM Flex Cobra - SOLD

5) Tomei High Capacity Baffled Oil Pan - SOLD

6) GReddy FMIC kit - SOLD - (No BOV flange welded on the hot or cold side piping, had been used in my S14 on an S13 SR w/ stock T25)

7) GReddy S14/15 Turbo Inlet/Outlet Elbows - $75

8) *NEW* KOYO N-Flo S14 SR20DET Radiator - SOLD - (Includes matching Koyo radiator cap! A good condition used cap that I had on my previous KA radiator, not included from Koyo when new)

9) *NEW* GPI Motocross Silicone SR Heater/Radiator Full Hose Kit (BLACK) - SOLD

10) Cody Ace Modified SR20DET OEM Turbo Manifold - SOLD
- Started with a good condition OEM manifold
- CodyAce modded w/ a tial MV-S flange welded on for external wastegate ($100 plus I shipped it there and paid to for shipping to swaintech)
- Swaintech white lightning thermal coated (coating has greyed some from its original white finish, mounted but never ran. $165 plus return shipping to me)
- Includes *NEW* Tial MV-S Wastegate (BLACK) w/ all springs and V-Band Flange and all clamps, you just gotta fab a dump pipe ($240+)

11) *NEW* SR20DET eBay 13lb. Chromo flywheel - $120

12) *NEW* SR20 Exedy Stage II 3-Puck clutch kit (Thick disk) - $300

13) *NEW* ARP SR20 Flywheel Bolts - SOLD

14) *NEW* B&M Short shifter - $150

15) S13 SR20DET "E5" ECU - SOLD

16) SR20DET 370CC Injectors - $80/SET

17) S13 SR20DET Fuel Rail w/ 4x STi Injectors - SOLD
-The whole set static flows between 540cc and 550cc
-Just got these back from servicing by DeatschWerks, cost me $125 on top of the $200 for the injectors
-Injectors received dynamic service including cleaning and flow testing and were installed in the rail by deatschwerks and the FPR was tested as well
-Flow charts included, there are only very minor variances between the group the maximum variance being 8cc/min between the highest and lowest at the static flow rate tested, in almost every other test they were within 1cc of their neighboring injectors. They were installed in ascending order of flow with cylinder 1 being the lowest up to cylinder 4 having the highest.

18) *NEW* Chase Bays SR20DET Power Steering Hose/Reservoir Replacement Kit - SOLD

19) S13 SR20DET T25 Turbo - SOLD

20) *NEW* OEM S14 SR20DET Fan Shroud - $60

21) *NEW* Wiring Specialties S13 SR20DET into S14 harness - SOLD
-Engine and trans/charge harness for non-ABS chassis with E4/E5 ECU, works with either an Automatic or Manual shell
-Charge harness was hooked up to my project shell fuse box but that's it, nothing else has been plugged in or routed, no cuts, splices, it is as new

22) Blown SR20DET trans and good KA24DE transmission - $100
-Swap bellhousings and you're good to go

23) Z32 MAF w/ Pigtail and 3" Air Filter Adapter - SOLD

24) *NEW* AEM 3" Dryflow Air Filter for MAF setup above - $25

25) SR20DET Ignitor - $50

26) S14 Non-ABS 5 Speed steel 1-Piece driveshaft - $220

27) *NEW* 3" Magnaflow High-Flow catalytic converter - $65

28) *NEW* Stainless 2.5" V-Band clamp - $15

29) *NEW* Stainless 3" V-Band clamp - $15

30) S14 Megan Type II DUAL TIP Full Polished cat-back exhaust - $200 - (Nice OEM look, polished piping looks great from behind the car, really good shape)

31) *NEW* Tomei Duracon Shift Knob (LONG) - $25

32) NISMO buttplug shift knob (WHITE) - SOLD

33) S14 SR20DET Turbo oil drain tube - $15

34) S13 SR20DET Valve cover - SOLD

35) S13 SR20DET Power steering pump - SOLD

36) S13 SR20DET Ignition coils - $75/set of four

37) *NEW* Tomei Rocker Arm Stoppers - $60

38) SR20DET Clutch Fan - $25

39) S13 SR20DET Longblock - $600!!!
-Block was painted Gold by the PO, it looks like ass
-Needs an upper oil pan, when I installed the tomei pan I found a broken threaded receiver, it will come with a stock lower pan and need an upper
-Has TIG weld reinforced S14 SR oil pickup tube, guaranteed not to break
-Engine is clean inside, never burned anything, ran solid on and off boost, no wierd noises.
-Has a *NEW* OEM S14 Water Pump installed, as well as a *NEW* OEM Thermostat
-Has been mostly re-gasketed, will include any left-overs from the full nissan gasket kit
-Includes 7 quarts of Amsoil 10W40 full synthetic heavy duty oil and 2 OEM nissan oil filters

240knockout

PM awaits...

corkscrew

posting for when i get paid friday haha. shipping quote to 33761?

240knockout

Tomei Oil pan is sold!!!

NISR20MO

What were you interested in?

Yessir, thanks again!

Wanabe

Flex Cobra Sold to me!!!!!!

__________________
@palmer_sndrsn

s13turbo

I want b&m shifter...

street_sleeper

Is the wiring harness set up for MAF or MAP/AIT? If MAP then I want it

frost1988

Ill take your ps lin re s and res.aswell as your arp flywheel bolts.pm me

NISR20MO

Thanks for the business I'll get ya some tracking this afternoon

$185 Shipped, I can send it out UPS tomorrow, add 2% to cover your half of the paypal fees (I will eat the other half)

It is a MAF harness setup, sorry bro

PM'd

manny325

still go the ps pump

NISR20MO

Yes, $60 shipped to you in texas, can send it out tomorrow! Paypal is the same as my email.

manny325

Ok ill send the miney in a bit

240knockout

oil pan shipped yday...in my hands tomorrow.
BUMP!

silvia910

Can you pm me pic of valve cover? I can have PayPal sent as soon as I get response. Shipped to 28403

adams 02rs

ecu and wiring specialties harness are sold! in process of payment! thnx alex

NISR20MO

Turbo, Injectors, and MAF were relisted. Had a payment deal with a local buyer fall through. Get at me!

NISR20MO

BUMP! Thread updated still lots left.

SupaDoopa

Pictures of number 19? How flexible are you on the Tomei Duracon seeing as they're under 30$ now here?

PayPal ready!

richmond82

do you have a oil pickup for a s14/s15?

__________________

Drake: 95 Swapped S15SR Z32 Swapped TT 1991Vert

NISR20MO

Nope, the only pickup is included in the longblock.

Thanks

jerryscherry

injectors the 550cc ones? and a quote for shipping of the injectors/rails to 91765

NISR20MO

One up me!

cured13

great seller, Thank You!

801nismo104

do you have this for sale?

2LiterTurbo

What CC on the STI injectors??? PM me im interested.

wawazat8402

Manifold and wastegate got here fast. Thanks!

NISR20MO

Sorry for the late replies!

Sorry, but I do not.

STi injectors were all cleaned and flow tested individually at Deatschwerks and then installed in a S13 rail. They came back with test results at 540 on the lowest flowing injector and 549 on the highest with the other two in the middle. I will try to snap a pic of the results and PM you. They are very close to 550cc injectors, I have wire pigtails for them as well.

Thanks again, please put it to good use!

NISR20MO

Bump, my cell phone bricked early yesterday, please contact via PM or email. Cell phone should be back up monday.

NISR20MO

On the come up! Phone back in action bump.