Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


Reply
 
Thread Tools Display Modes
Old 08-18-2008, 06:55 PM   #1
Phoenix_95
Leaky Injector
 
Phoenix_95's Avatar
 
Join Date: Dec 2006
Location: Greenbrier TN
Age: 36
Posts: 133
Trader Rating: (0)
Phoenix_95 will become famous soon enoughPhoenix_95 will become famous soon enoughPhoenix_95 will become famous soon enoughPhoenix_95 will become famous soon enoughPhoenix_95 will become famous soon enough
Feedback Score: 0 reviews
93 S13 Needing help

The car is a 93 with the stock ka24de.

The Problem: I bought the car in a perfect running condition and about a month after that it developed a miss in it (the 4th injector crapped out). After discovering that the #4 injector was bad...I checked the rest of them...all of which were testing 18-20+ ohms (they were about screwed too). I replaced all of the injectors and it ran well for almost an entire day and it has now developed yet another miss and there is now a fair amount of smoke coming from the exhaust (smells rich).

I don't know in which direction I need to proceed.

I have searched just about everywhere I know to look for information on this problem and I have tried nearly everything that I know to try to get this issue resolved.


What I have tried/fixed:

New ngk plugs
New injectors/o-rings
New plug wires
New rotor/cap/button
New fuel filter
New oil filter/oil change
Checked Compression:
#1 165
#2 165
#3 160
#4 160


There is spark. There is fuel. The timing is set correctly. Any information at all would be helpful. Thanks in advance.
Phoenix_95 is offline   Reply With Quote
Sponsored Links
Old 08-19-2008, 10:16 AM   #2
drftthatshit
Zilvia Member
 
Join Date: Jul 2008
Location: fox lake
Age: 33
Posts: 192
Trader Rating: (0)
drftthatshit is on a distinguished road
Feedback Score: 0 reviews
well there is 3 things you need for an engine to run fuel, spark, and commpression with out those 3 nothing will happen but you have all of that so i would check grounds see if the maf is working correctly also the tps and most of all make sure it is timmed properly you had the cap and rotor off right? so you might want to see if you have it all timmed right hope this helps my friend let me know
drftthatshit is offline   Reply With Quote
Old 08-23-2008, 09:48 AM   #3
Massimo Power
Zilvia Junkie
 
Massimo Power's Avatar
 
Join Date: Jul 2008
Location: Corona, CA
Posts: 322
Trader Rating: (8)
Massimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to allMassimo Power is a name known to all
Feedback Score: 8 reviews
Send a message via AIM to Massimo Power
definetly go out and check the timing... also check the air filter make sure all that is in good working order and make sure the MAF is clean.. or even working... i know pepboys sells MAF cleaner...
__________________

www.massimopower.com
PH: 1(951)402-5386
EM:[email protected]
Special Thanks To:
www.aeperformance.com
www.domospeed.com/blog
For Their Continued Support
Massimo Power is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:27 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™