Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 11-29-2017, 11:15 AM   #1
afishysilvia
Premium Member
 
afishysilvia's Avatar
 
Join Date: Jan 2010
Location: Cali
Posts: 3,372
Trader Rating: (30)
afishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfection
Feedback Score: 30 reviews
s14 Swap wiring help

Hey guys,

So lets start with its a 1995 S14, automatic. I removed the KA24DE and the auto transmissions, with that being said the upper and lower harnesses were removed for the gentlemen who purchased it. I have since done a few things..

1. Converted to 5-speed, removed AT ecm.
2. Swapped in new engine using its own ECM and harness. I was able to wire up some of the needed connections from the F3 connector inside the car. However I am having some issues still.

1. I have no lights, horn, turn etc...Now I know that the lower harness on the S14 connects to the fuse box inside of the engine compartment, however I no longer have the harness. I cant find anywhere on how/pins to find in order to wire this up, and would I wire directly from fuse box to F3 connection?

2. I have read everywhere about the fuel pump relay setup and that its ground triggered, so I have seen people tell me to ground the black/pink wire for fuel pump relay, and I have also read somewhere they recommend grounding pin 1 black/white wire on the fuel pump relay and then my black/yellow should be my hot wire.

Can someone please confirm/assists on my struggles, thanks everyone.
afishysilvia is offline   Reply With Quote
Sponsored Links
Old 11-29-2017, 12:51 PM   #2
unicoder
Zilvia Member
 
unicoder's Avatar
 
Join Date: Apr 2017
Location: Alabama
Posts: 160
Trader Rating: (2)
unicoder is an unknown quantity at this point
Feedback Score: 2 reviews
Sorry but you didn't mention if you had used this or not. But have you looked at this page?
__________________

5.3 V8 Swap w/ Nitrous
unicoder is offline   Reply With Quote
Old 11-29-2017, 02:05 PM   #3
afishysilvia
Premium Member
 
afishysilvia's Avatar
 
Join Date: Jan 2010
Location: Cali
Posts: 3,372
Trader Rating: (30)
afishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfection
Feedback Score: 30 reviews
Quote:
Originally Posted by unicoder View Post
Sorry but you didn't mention if you had used this or not. But have you looked at this page?
This does help, thank you for that. However I am still somewhat lost because I am using a T56 so I didnt plan on neutral safety switch or anything like that. I am able to start the car as I ran my own signal from ignition to the ECM.
afishysilvia is offline   Reply With Quote
Old 11-30-2017, 07:36 AM   #4
afishysilvia
Premium Member
 
afishysilvia's Avatar
 
Join Date: Jan 2010
Location: Cali
Posts: 3,372
Trader Rating: (30)
afishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfection
Feedback Score: 30 reviews
Two small connectors with 8 gauge (both white wires with red stripe) connected to power, boom we have power on everything again thanks, hope this helps anyone else.
afishysilvia is offline   Reply With Quote
Old 12-12-2017, 08:32 AM   #5
afishysilvia
Premium Member
 
afishysilvia's Avatar
 
Join Date: Jan 2010
Location: Cali
Posts: 3,372
Trader Rating: (30)
afishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfectionafishysilvia is close to perfection
Feedback Score: 30 reviews
Gonna bump my own thread again, my car is a 95 with the OBD2 connector under the dash from factory. On my F3 plug I have two wires that say CONSULT, a green/white wire and a green wire. Does anyone know of which is the signal wire in order to read the ecm?
afishysilvia is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:44 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™