alwyzDTF

Sideskirts are an inch too short on each side =( I got the rear bumper on fine with very little sanding and managed to get the front bumper on but it was way too wide so right under both headlights and infront of the intercooler there are these big arches in the fiberglass from being pushed together at the corners to the fenders. My question is how in the world do I fix it?

Edwin562

what brand is it?

iLagX

probably the kit you got its made for 200mm fenders

__________________
PARTING OUT S13/S14 NEED PARTS PM ME!

Felipe

^^^^^^^ +1

__________________
Late Night Crew #1

alwyzDTF

Its a URAS Type 4 and I have a bumper retainer so it shouldnt be sagging that bad. Im going to try to raise the retainer a bit and see if that helps it all. I ordered the kit for a s14 kouki and those are oem fenders. its doing the same thing on the passenger headlight but what about the part in the middle infront of the intercooler down low?

alwyzDTF

Maybe pull the fenders where the bumper meets the fender just slightly so it takes less tension off? I dont even want to go through selling these fenders and waiting for bigger ones in the mail

fliprayzin240sx

Wow...that bumper look like utter shit. I havent seen a kit look wavy in a long time...

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

STL240SXDRIFT

Exactly...fiberglass and that wavy...

Chaser Aero?

brndck

Wow the upper line along the headlights looks like garbage. Aren't you glad you saved a few bucks and bought knockoff aero???

__________________

http://outslidersandsmokeproduce.blogspot.com/

shiftdrift

rofl. send it back and tell them it's garbage.

__________________
SW Fab

fliprayzin240sx

Tell us what it is and where you got it from...so we know not to ever get it from them.

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

delado

It looks like a bag of dicks even in your avatar.

nathanong87

waves for dayssss

__________________
IG @nathanong87 --- Night ★ Life
natelife.tumblr.com

brndck

It's from chaser (surprise surprise)
The op posted in the groupbuy thread
http://zilvia.net/f/group-buys/41618...-new-post.html

__________________

http://outslidersandsmokeproduce.blogspot.com/

sterlinge

You may have got s13 skirts. But the way the front bumper looks I'm sure everything is garbage.

alwyzDTF

Its a URAS Type 4 from Chaser Aero. "Steve" was the guy and I called him atleast 5 times to tell him to double check and make sure that 1 kit is all s14 and 1 kit is all for an s13. ill post pictures tmrw of the skirts and a better picture of the shitty front bumper and the cracks. I already drilled holes in everything so I dont know If I can get a refund? what do you guys think?

harrypotter

Maybe ask company. But I can tell you how my refund went, actually it didn't. I purchased a carbon fiber coil pack cover for my SR from them. Came to me with no holes drilled in it. Picture on site shows holes drilled in it. They said it was not drilled any more and that the best way to hold it is Velcro. Dude said that way I can easily access my coils/plugs. That is bs cause ashesive does not like to stick in hot environment. I tried it anyway and after a five minute drive it was in my exhaust manifold. Then I tried my best to drill holes in it, let's just say I am not a carbon fiber worker and it is trash now.

I contacted them (prior to drilling) and they said all they could possibly do is give me some money off of another product of theirs. I took a $75 dollar loss cause I didn't want to spend more money on another shit product. If I can find it in my garage I will probably shoot it soon!

__________________

EnemyS15

I just threw up in my mouth. Take that shit off. Sell it to some Honda kid as a widebody Honda bumper kid for 50$ and find another kit.

shiftdrift

i can't believe a company would let a product go out like that. honestly that's not even good enough to go on a drift car.

__________________
SW Fab

nathanong87

What is kinda funny is that in this pic
http://www.aerokits.net/cart/images/nissan/m127_9.jpg

U can kinda see the same "too wide" "wavy" bull that this dude is complaining about. And btw at 240$ a kit , quit whining. Drive it, blow it up, 240$ ain't a big thang.

Also funny they are using kielys car as a demo car still. Loved that thing!

__________________
IG @nathanong87 --- Night ★ Life
natelife.tumblr.com

omgRWDgoodness!

Sounds like URAS is essentially made to be shoved up ur ass.

__________________

ZenkiKid

You bought a $240 kit and expected it to fit like a glove? HAHAHAAHHA

__________________
http://www.nissanroadracing.com/

alwyzDTF

nathanong87 GET THE FUCK OUT OF THIS THREAD! read the original post you illiterate motherfucker. I asked "My question is how in the world do I fix it?" I understand I only paid $315 shipped to my door but that's because it was a group buy and we got a huge discount and I had 2 kits shipped to my house. they're not originally this cheap but even then the skirts shouldnt be so short that I cant wrap them around the fender to zip tie. thanks for the help though buddy

siksyndicate

Lets just say my experience was the same. I bought their inverted hatch for the s13...boy was that the biggest mistake I ever made. I don't know what I was thinking trusting zilvia members reading their reviews of products from chaser on a forum meant to help others It didn't fit, the hinge holes were in the wrong place, it was wavy, did not come with the hatch glass as promised, had major gap issues and the trunk latch was in the wrong place. Basically they sent me a warped hatch that a body-man wouldn't even touch it.

Through my process I was talking to a "Russ." All was good I was as professional as can be, just wanted them to give me another hatch that I could work with....again I understand inexpensive kits are not going to fit even 75%. All the sudden "Russ" is gone and I am now dealing with a "Joe." I was professional with "Joe" never got heated just wanted the problem corrected. Sent him pictures. Then he stop responding to me through PM. I still have all the PM's in my box to prove it. I paid through Paypal so I started a claim. Then he offered to give me $75 back. I never accepted and the case closed because I didn't accept. I have not re-opened it because I would just rather not deal with them EVER again and take my losses and try selling it on criagslist. I told them when the time came I would let others on multiple forums know to never do business with them. This is last February '11. Im just now commenting on my experience.

I understand its America and they are trying to run a business to survive, but if you're going to sell sub-par products, at least have stellar customer service so customers "think" they didn't get screwed....c'mon chaser get your act together.

OP - Good luck trying to get anything rectified by them. My suggestion is to either heat up(without burning) the wavy part and using clamps to slowly straighten it out or cut the wavy party out and fabricate a new straight piece. a lot of work to- in theory, save money.

.02 cents

sidewaysil80

the ONLY way you can fix it is to stomp the shit out of them and order from a better company. it's shit quality, they have always been shit quality, and always will be shit quality. matter of fact the only thing worse then chasers quality is their customer service.

LOL, "how do i fix the inch short side skirts and high tide front bumper?"
but hey, you saved some money.

fliprayzin240sx

Honestly, from what I've read...only way I would get anything from chaser would be drive my ass to MD with no bumpers and have them fit me a kit themselves. I'm not paying for shit that wouldnt atleast ziptie on the car...

__________________

If you think Zilvia has too many assholes...
CLICK HERE!!!

Nismo 240

Its just fiberglass thats how it is some of the kits come pretty bad some of them dont i got a URAS kit for my S13 from chasers was it perfect no was it in horrible shape no pretty much anything you get fiber glass is gonna need some work done to it so it can fit right no matter where it comes from.
To make your side skirts fit you might have to cut them and extend them

siksyndicate

My original authentic s13 c-west kit and s13 vertex ridge kit beg to differ sir.

Both fit spot on.

sidewaysil80

fixed that for you. the only reason you think that is because you have probably never owned an authentic frp aero piece. don't assume everyone else buys shit aero and don't try and make people think a body kit shouldn't bolt right up and fit out of the box.

brndck

you are fucking retarded.
stop buying junk parts.
a good kit will fit like butter
ever seen a vertex kit? or even a shine auto?
real trust aero? real BN sports?
that shit lines up perfectly and will sit there without even adjustment.

the problem is that everyone wants vertex quality for chaser price. for $300 a kit and you expect it to fit right??? good fucking luck.

__________________

http://outslidersandsmokeproduce.blogspot.com/