Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk

Tech Talk Technical Discussion About The Nissan 240SX and Nissan Z Cars


Reply
 
Thread Tools Display Modes
Old 02-20-2012, 05:06 PM   #1
S13k's
 
S13k's's Avatar
 
Join Date: Jul 2011
Location: Nova Scotia
Age: 30
Posts: 41
Trader Rating: (0)
S13k's is an unknown quantity at this point
Feedback Score: 0 reviews
Installing HID Bulbs in to triple projectors Low beams without modifying housing

Okay guys I apologize if this seems like a repeat, But every thread on the topic I have found involves, cutting, modifying and risking potential damage to these head lights. The way I am showing doesn't wreck anything and allows the part to be switched back to the original if ever needed.

So..These lights are well known to be very dull and hard to see without highbeams. Mine however were just neglected when I purchased it. After looking at a few other threads I realized everyone involve, cutting, drilling or modifying a bracket or bulb. I wanted to post a plug and play version.
THE PROBLEM:
The bulb holders don’t support H1 bulbs and have different holders. In my case…..1 Side projector had a bracket that was all cut up and the bulb bounced around. The other side


I was shocked to find out didn’t have any holder!Thanks of a previous owner

That is the result, #1 fire hazard, #2 you can’t see anything!
So after some looking around I found that the root of the problem is the mounting plate’s. They are designed for out of date bulbs and are very hard to find bulbs that are difficult to obtain and aren’t very good. So here’s what I have found to be the easiest way to solve the problem.
What you need:

TOOLS:
• 10mm socket and ratchet
• 10mm spanner
• Robinson screwdriver
• Four 0.4X ½ “ self taping screws ( local hardware store)
• Philips head screwdriver
• Flat blade screwdriver
• HID Kit With H1 Bulbs ( the one I used was 6000k white)



I ordered slim line ballasts just to save space under the hood, Looks cleaner ( and they come in black)



Firstly remove the parking lights - there is one screw holding them on top of the headlights. Also remove the centre grill to get at the retaining nuts and bolts. There are two bolts on the top and two underneath. The bottom ones can be tricky. Unplug the hi/low beams three prong plug from the loom and then remove the headlights.


(Pay no attention to the crappy paint Since then it has been painted)
Once the headlights are removed just unscrew the plastic locks off the back of the low beams. And it will show you what your dealing with for plates.

Then your left with:



When I took off my plastic ring, and boot off the low beams I have no aluminum bulb backing. But normally you do have a plate here.


This is the part where things normally get difficult… but I found this great product!



The great thing about these is these are authentic H1 adapter plates with clips! So if you order H1 bulbs and these adapters no modification is required to get the bulb to fit!
When I put the HID bulb in for a test fit…Perfect, no drilling or molding
required.


The bulb has to be removed to screw the aluminum bulb plate backing into the housing. Then just replace the bulb and the rubber boot/ ring lock and bulbs are installed!

After the rubber boots installed


Then just install and Zip tie the ballast and done! I can get more pictures of the final installation if needed later this week! I can explain in more detail if needed too!
Attached Images
File Type: jpg IMG_1839.jpg (360.3 KB, 801 views)
File Type: jpg IMG_1837.jpg (316.6 KB, 784 views)
File Type: jpg IMG_1795.jpg (392.9 KB, 786 views)
File Type: jpg IMG_1832.jpg (287.8 KB, 776 views)
File Type: jpg IMG_1841.jpg (394.2 KB, 784 views)
File Type: jpg IMG_1828.jpg (264.9 KB, 764 views)
File Type: jpg IMG_1829.jpg (243.6 KB, 761 views)
File Type: jpg IMG_1830.jpg (221.8 KB, 755 views)
File Type: jpg IMG_1835.jpg (289.4 KB, 764 views)
__________________
Officer> "Is that Steering Wheel on the Right side because you moved it!?"

Last edited by S13k's; 03-07-2012 at 01:40 PM..
S13k's is offline   Reply With Quote
Sponsored Links
Old 02-20-2012, 05:12 PM   #2
GhostlyCoupe
Zilvia Member
 
Join Date: Dec 2011
Location: Phoenix, AZ
Age: 38
Posts: 221
Trader Rating: (1)
GhostlyCoupe is an unknown quantity at this point
Feedback Score: 1 reviews
Good info but you need to shrink the pictures. They can't even fit on my 23" screen at 1900 x whatever resolution.
GhostlyCoupe is offline   Reply With Quote
Old 02-20-2012, 05:26 PM   #3
Sarom_ps13
Zilvia Member
 
Sarom_ps13's Avatar
 
Join Date: Apr 2009
Location: Lacey,Wa
Age: 30
Posts: 180
Trader Rating: (0)
Sarom_ps13 is an unknown quantity at this point
Feedback Score: 0 reviews
I need those ring locks..
__________________
Sarom_ps13 is offline   Reply With Quote
Old 02-20-2012, 05:28 PM   #4
S13k's
 
S13k's's Avatar
 
Join Date: Jul 2011
Location: Nova Scotia
Age: 30
Posts: 41
Trader Rating: (0)
S13k's is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Sarom_ps13 View Post
I need those ring locks..

2x Benz 320 H1 Halogen To HID H1 Bulbs Adapter Holders
are the actual item name, I found them singular on eBay for 6.00 each.
In bulk they can be bought from Brand New Wholesale Benz 320 H1 Halogen To HID H1 Bulbs Adapter Holders Free Shipping [C191]
__________________
Officer> "Is that Steering Wheel on the Right side because you moved it!?"
S13k's is offline   Reply With Quote
Old 02-20-2012, 05:31 PM   #5
Sarom_ps13
Zilvia Member
 
Sarom_ps13's Avatar
 
Join Date: Apr 2009
Location: Lacey,Wa
Age: 30
Posts: 180
Trader Rating: (0)
Sarom_ps13 is an unknown quantity at this point
Feedback Score: 0 reviews
Oh sweet thanks!
__________________
Sarom_ps13 is offline   Reply With Quote
Old 02-20-2012, 05:51 PM   #6
silviaks2nr
Nissanaholic!
 
silviaks2nr's Avatar
 
Join Date: Nov 2004
Location: SC
Posts: 2,105
Trader Rating: (10)
silviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymoresilviaks2nr is not welcome here anymore
Feedback Score: 10 reviews
the "correct" way to do it would be to retrofit oem hid projectors suited for a lhd vehicle. You would want to replace the thick glass headlamp lenses with clear plastic ones as well.
silviaks2nr is offline   Reply With Quote
Old 02-20-2012, 05:55 PM   #7
S13k's
 
S13k's's Avatar
 
Join Date: Jul 2011
Location: Nova Scotia
Age: 30
Posts: 41
Trader Rating: (0)
S13k's is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by silviaks2nr View Post
the "correct" way to do it would be to retrofit oem hid projectors suited for a lhd vehicle. You would want to replace the thick glass headlamp lenses with clear plastic ones as well.
But this isn't a conversion front end, this is a rhd, I was going for the easiest way without potentially ruining the original light, plastic is another option thanks for the input
__________________
Officer> "Is that Steering Wheel on the Right side because you moved it!?"
S13k's is offline   Reply With Quote
Old 02-20-2012, 06:04 PM   #8
Cease_Super_Hicas
Zilvia FREAK!
 
Cease_Super_Hicas's Avatar
 
Join Date: Dec 2010
Location: Anaheim/Corona
Age: 32
Posts: 1,120
Trader Rating: (35)
Cease_Super_Hicas is an unknown quantity at this point
Feedback Score: 35 reviews
Send a message via Yahoo to Cease_Super_Hicas
I've bought hids for my duals and projectors and never had to cut or modified the housings at all!!!!! Just burly the correct bulb size
Cease_Super_Hicas is offline   Reply With Quote
Old 02-20-2012, 07:42 PM   #9
R33E8
Zilvia Addict
 
Join Date: Jul 2006
Location: NJ
Age: 31
Posts: 797
Trader Rating: (14)
R33E8 is an unknown quantity at this point
Feedback Score: 14 reviews
Quote:
Originally Posted by silviaks2nr View Post
the "correct" way to do it would be to retrofit oem hid projectors suited for a lhd vehicle. You would want to replace the thick glass headlamp lenses with clear plastic ones as well.
+1...

And make your pictures smaller..
R33E8 is offline   Reply With Quote
Old 02-20-2012, 09:58 PM   #10
!Zar!
Premium Member
 
!Zar!'s Avatar
 
Join Date: Nov 2004
Location: North Korea
Posts: 14,576
Trader Rating: (27)
!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection
Feedback Score: 27 reviews
This thread title is missleading.

If you all want the PROPER way to go about this, check this thread from the FAQ section.

http://zilvia.net/f/archive-faqs/128...eadlights.html
__________________
!Zar! is offline   Reply With Quote
Old 02-21-2012, 09:04 AM   #11
Chaluska
Zilvia Addict
 
Join Date: May 2008
Location: Missouri City, TX
Age: 38
Posts: 997
Trader Rating: (2)
Chaluska is an unknown quantity at this point
Feedback Score: 2 reviews
Quote:
Originally Posted by !Zar! View Post
This thread title is missleading.

If you all want the PROPER way to go about this, check this thread from the FAQ section.

http://zilvia.net/f/archive-faqs/128...eadlights.html
+1

This is not the proper way to install hid lights..

the proper way is to remove the garbage RHD low beam projectors, and swap in some quality projector units, that use D2s bulbs from the get-go..

not "rigging" up a H1 bulb holder to a trash projector.
__________________
Chaluska is offline   Reply With Quote
Old 02-21-2012, 09:27 AM   #12
S13k's
 
S13k's's Avatar
 
Join Date: Jul 2011
Location: Nova Scotia
Age: 30
Posts: 41
Trader Rating: (0)
S13k's is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by Chaluska View Post
+1

This is not the proper way to install hid lights..

the proper way is to remove the garbage RHD low beam projectors, and swap in some quality projector units, that use D2s bulbs from the get-go..

not "rigging" up a H1 bulb holder to a trash projector.
Sorry for the confusion I edited the title for clarity and I was not going for a retro fit.
__________________
Officer> "Is that Steering Wheel on the Right side because you moved it!?"
S13k's is offline   Reply With Quote
Old 03-04-2012, 03:45 PM   #13
venom
 
venom's Avatar
 
Join Date: Aug 2009
Location: oakland ca
Age: 34
Posts: 10
Trader Rating: (0)
venom is an unknown quantity at this point
Feedback Score: 0 reviews
shit i ve been looking for this for long time!!!!!!! i found this when i was looking for a whole new headlights (250+) thank u thank u!!!
venom is offline   Reply With Quote
Old 03-24-2012, 10:48 PM   #14
dirtijerzi240
Zilvia Member
 
Join Date: Jan 2012
Location: jersey
Posts: 172
Trader Rating: (1)
dirtijerzi240 is an unknown quantity at this point
Feedback Score: 1 reviews
OP, this thread was very helpful, thanks!!!
dirtijerzi240 is offline   Reply With Quote
Old 11-04-2012, 11:48 AM   #15
shaggy sr
Zilvia FREAK!
 
shaggy sr's Avatar
 
Join Date: Jun 2011
Location: queens, nyc
Posts: 1,454
Trader Rating: (7)
shaggy sr is an unknown quantity at this point
Feedback Score: 7 reviews
any update? i need a set hid for silvia s13 lights (fogs, low beams/high beams) what size?
__________________
shaggy sr is offline   Reply With Quote
Old 11-05-2012, 12:50 AM   #16
airynmanj
 
Join Date: Nov 2012
Location: new york
Age: 35
Posts: 8
Trader Rating: (0)
airynmanj is an unknown quantity at this point
Feedback Score: 0 reviews
You would want to replace the thick glass headlamp lenses with clear plastic ones as well.
airynmanj is offline   Reply With Quote
Old 11-05-2012, 01:57 PM   #17
S13k's
 
S13k's's Avatar
 
Join Date: Jul 2011
Location: Nova Scotia
Age: 30
Posts: 41
Trader Rating: (0)
S13k's is an unknown quantity at this point
Feedback Score: 0 reviews
Sorry I ment to update sooner but I haven't been home in a while. The end result was great. I only did my low beams for the time being but i'm sure you could do it to all three no problem. The light is extremely clear at night and makes for a much nicer drive.
Here is some pics;
Attached Images
File Type: jpg IMG_0758.jpg (518.2 KB, 64 views)
File Type: jpg IMG_0760.jpg (502.3 KB, 47 views)
__________________
Officer> "Is that Steering Wheel on the Right side because you moved it!?"
S13k's is offline   Reply With Quote
Old 12-20-2017, 04:46 PM   #18
awaller21
 
Join Date: Dec 2017
Location: BEND
Age: 23
Posts: 1
Trader Rating: (0)
awaller21 is an unknown quantity at this point
Feedback Score: 0 reviews
Sorry to bump an old post, but what HID kit are you using?
awaller21 is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™