Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > Engine Tech

Engine Tech Technical discussion related to all relevant engines such as KA, SR, RB, CA, 2JZ , L24/26/28, VG, VQ, and LSx series.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 06-06-2012, 05:39 PM   #1
NHTKID
Zilvia Junkie
 
Join Date: Jul 2011
Location: TX
Posts: 380
Trader Rating: (9)
NHTKID is an unknown quantity at this point
Feedback Score: 9 reviews
16.5 afr at idle/part throttle driving sr20 :(

so heres the deal, for one i know that afr at idle is fine, but there is more to it. not to mention im anal and want the thing running perfect. my car is a stock j4 sr20det with a j4 wiring specialties harness. Its running fine, my plugs are a tad white but nothing TOO terrible, however at WOT my afr is between 11.5-12.. with an occasional 10ish.. This is what has been bothering me though at idle its a consistent 16.4 and from -20 to -15 itll be around 15.7, then from -15 to 5pds of boost part throttle (light load) it actually gets leaner, averages 16.5 to 17.5 with the occasional 18 which is bad. Its funny though, ive gone through 2 coolant temp sensors because when i first start the car even when the motor is warm, itll start and hit 1500 rpms, and slowly idle down like its a cold start lol, during which time the afr's are beautiful, 13.5-14.7 part throttle and wot 10-11.5... so naturally i thought it was that, its been replaced twice with the 96-98 ka24de coolant temp sender (round type, as i have a 97 s13 type x sr)..

im semi dumb founded. any help would be greatly appreciated.




i have also considered the fact that im not COMPLETELY stock and since the ecu is a stock map it might be running lean and i need a tune, is that a possibility?

sr20det blacktop j4
intake
full 3 in exhaust straight pipe
blitz FMIC
walboro fuel pump
z32 fuel filter
hks ssqv bov
vacuum directly to wastegate for 7pds since im having this issue
aem wideband
boost/vacuum gauge
oil pressure gauge
NHTKID is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:20 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™