azsr20det

Midway into installing my oil cooler / filter relocation / temp & pressure sensors and had a few questions, basically im running the lines (all 10AN hoses) from block, to cooler, from cooler to relocated filter, back to block







My qustions are, with the 10 row oil cooler, and roughly 15ft of hose, about how much extra oil do I need? Stock s13 sr20det is 3.7 liters but obv with the cooler and hoses theres an increased capacity.

Also is the spot ive got the relocated filter at ok height wise? Or too high up, its on the pass side of the bay on the side of the fenderwell between the strut adjustment stuff and the intake manifold

And lastly can anyone with an oil filter relocation kit installed confirm I have the hoses running to the correct inlet/outlet on the filter holder thing? The 90degree hose is coming out of the cooler and into the filter and the straight fitting hose is the one that runs from the relocated filter back to the block (it goes from block then through cooler first, then to the filter with the sensors so i can see the post cooled temp and pressure then back to block) just want to make sure I dont have them flip flopped lol