Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 11-02-2009, 01:45 AM   #1
chituntang
Zilvia Junkie
 
Join Date: Sep 2005
Location: ATL
Age: 35
Posts: 505
Trader Rating: (13)
chituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nice
Feedback Score: 13 reviews
S14: Popping noise during slow turns

It starts to make this popping noise recently. This happens when I am driving really slow (almost rolling speed). It happens to both left and right side. I have done the following things to the front suspension:

New OE struts tops with KYB AGX and RSR springs
New Moog FLCA ball joints

I am planning to do the following:
Rebuild power steering rack
Tension rods

Thanks in advance
Jesse

BTW, does anybody knows if a fully loaded IS350 (I mean fully loaded like NAVI, heat/cold seats, like everything) has stock bigger wheels at the back? Looked at one today and:

Stretch tires running 225/40/18 front and back
Passenger front wheel has a dent

Any of the above would cause shaking? I am not talking about the steering wheel, but the ride is shaky. The steering seems fine.
chituntang is offline   Reply With Quote
Sponsored Links
Old 11-02-2009, 02:08 AM   #2
SoguRacing
Post Whore!
 
SoguRacing's Avatar
 
Join Date: Nov 2007
Location: (714)
Age: 35
Posts: 2,967
Trader Rating: (23)
SoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfection
Feedback Score: 23 reviews
Send a message via AIM to SoguRacing
edited.........
__________________
Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180

Last edited by SoguRacing; 03-01-2010 at 02:51 PM..
SoguRacing is offline   Reply With Quote
Old 11-02-2009, 08:03 AM   #3
japslapsilvia
Zilvia FREAK!
 
japslapsilvia's Avatar
 
Join Date: Nov 2007
Location: dallas, TX
Age: 38
Posts: 1,244
Trader Rating: (12)
japslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the roughjapslapsilvia is a jewel in the rough
Feedback Score: 12 reviews
yes on the IS350. stock wheels are 18x8 front and 18x8.5 rear...unless its AWD
__________________

Quote:
Originally Posted by jspecusa View Post

Nothing is rare just expensive.
Quote:
Originally Posted by ixfxi View Post
if you've ever been with multiple women, then even you can understand that not all girlfriends are created equal. some are capable of amazing oral talents, while others dont mind a lill back door action.
japslapsilvia is offline   Reply With Quote
Old 11-02-2009, 10:21 AM   #4
S13Sauce
 
S13Sauce's Avatar
 
Join Date: May 2009
Location: florida
Posts: 34
Trader Rating: (0)
S13Sauce is an unknown quantity at this point
Feedback Score: 0 reviews
when u reinstalled the struts did you make sure the black cup on top was seated right on the springs? because i did mine on my old car and when i tirned the prings were poping around when i turned.
S13Sauce is offline   Reply With Quote
Old 11-02-2009, 10:41 AM   #5
Dazzla
Zilvia Member
 
Join Date: Feb 2008
Location: USA
Posts: 216
Trader Rating: (0)
Dazzla is an unknown quantity at this point
Feedback Score: 0 reviews
Quote:
Originally Posted by S13Sauce View Post
when u reinstalled the struts did you make sure the black cup on top was seated right on the springs? because i did mine on my old car and when i tirned the prings were poping around when i turned.
Yeah. It's either that or something is loose. I had the same problem with my coilovers when one of the perches wasn't fully tight.
Dazzla is offline   Reply With Quote
Old 11-02-2009, 11:27 AM   #6
!Zar!
Premium Member
 
!Zar!'s Avatar
 
Join Date: Nov 2004
Location: North Korea
Posts: 14,576
Trader Rating: (27)
!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection!Zar! is close to perfection
Feedback Score: 27 reviews
Noise during turning would most likely come from:

Loose nut on the top of the coilover.
Loose camber bolts on the top of the coilover.
Loose tension rod bracket.
Bad lower control arm bushing.
If it's under braking then it's most likely a loose brake caliper.
__________________
!Zar! is offline   Reply With Quote
Old 11-02-2009, 11:42 AM   #7
c72c
Zilvia Addict
 
c72c's Avatar
 
Join Date: Jul 2009
Location: Albuquerque
Posts: 944
Trader Rating: (25)
c72c is an unknown quantity at this point
Feedback Score: 25 reviews
Quote:
Originally Posted by !Zar! View Post
Noise during turning would most likely come from:

Loose nut on the top of the coilover.
Loose camber bolts on the top of the coilover.
Loose tension rod bracket.
Bad lower control arm bushing.
If it's under braking then it's most likely a loose brake caliper.
also the tie rods
or mounting bolts from the strut to the spindle

make sure all the shyte is tight that you installed, friend of mine had the same problem you're havin, the top bolt to the spindle was loose and the pop was the wheel camber-ing.
c72c is offline   Reply With Quote
Old 11-02-2009, 12:34 PM   #8
chituntang
Zilvia Junkie
 
Join Date: Sep 2005
Location: ATL
Age: 35
Posts: 505
Trader Rating: (13)
chituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nicechituntang is just really nice
Feedback Score: 13 reviews
Thanks on the IS350 comment. That explains why the rear looks more stretch than the front.

As for my car, the strut tops were done at least a year ago. So I do not think it is the install.
Really need to study, but I guess I will do a little wrench before that...

I will check and see if all bolts are torque properly (brakes, tie rods, struts, and the control arms). And now come to think of it, it does make a funny sound when I brake...
chituntang is offline   Reply With Quote
Old 03-01-2010, 12:28 AM   #9
My 180 8 u
Zilvia Member
 
My 180 8 u's Avatar
 
Join Date: Dec 2009
Location: The Real OC
Posts: 155
Trader Rating: (1)
My 180 8 u is an unknown quantity at this point
Feedback Score: 1 reviews
Might sound stupid but tighten your lug nuts. In my 240 I would here a thump at an even pace. It would sound as if the tire had a bad spot on it. So I tightened the lug nuts and it since then gone away. Hope this helps
My 180 8 u is offline   Reply With Quote
Old 03-01-2010, 12:32 AM   #10
GroundHog
 
GroundHog's Avatar
 
Join Date: Mar 2010
Location: arizona
Age: 37
Posts: 12
Trader Rating: (0)
GroundHog is an unknown quantity at this point
Feedback Score: 0 reviews
sounds like your tie rod ends, or maybe something stupid lol
GroundHog is offline   Reply With Quote
Old 03-01-2010, 02:51 PM   #11
SoguRacing
Post Whore!
 
SoguRacing's Avatar
 
Join Date: Nov 2007
Location: (714)
Age: 35
Posts: 2,967
Trader Rating: (23)
SoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfectionSoguRacing is close to perfection
Feedback Score: 23 reviews
Send a message via AIM to SoguRacing
check your alignment. could be the tread gripping the asphalt at low speeds.
__________________
Pre Tune Checkup! Compression,LeakDown,Vacuum Test $80. Cams Install: $180
SoguRacing is offline   Reply With Quote
Old 03-01-2010, 03:59 PM   #12
KA24sleeper
Zilvia Junkie
 
KA24sleeper's Avatar
 
Join Date: Sep 2009
Location: SoCal
Age: 31
Posts: 359
Trader Rating: (2)
KA24sleeper is an unknown quantity at this point
Feedback Score: 2 reviews
had the same problem on my hachi awhile back when i gave it new coils, i just had to tighten them down more and get new rod ends cuz they were cracking the old ones( yes they cracked, took out the end bold and there was a crack along the side of it)
KA24sleeper is offline   Reply With Quote
Old 12-16-2010, 01:39 PM   #13
mofeel
 
mofeel's Avatar
 
Join Date: Dec 2010
Location: IN
Age: 29
Posts: 29
Trader Rating: (0)
mofeel is an unknown quantity at this point
Feedback Score: 0 reviews
yea im having the same problem except mine will pull to that side. its mainly the left side popping n pulling. the steering wheel also turns with the pull.
mofeel is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:49 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™