Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 08-23-2015, 03:08 AM   #1
Croustibat
Nissanaholic!
 
Join Date: Aug 2011
Location: France - Toulouse
Age: 41
Posts: 1,851
Trader Rating: (0)
Croustibat is an unknown quantity at this point
Feedback Score: 0 reviews
How to unbolt a brake booster on a LHD S13

Hey guys,

i was a little stuck yesterday trying to remove that thing. I unbolted the MC, no problem at all, ans then proceeded to remove the 4 bolts on the other side.

My problem is that i just have no access to the upper right one. The 3 others went easily, but i just can't reach the 4th. Is there a trick here ? Do i need to unbolt something else first ? Use an extension ? It seems the hard part is removing the clip, but i got stopped before
Croustibat is offline   Reply With Quote
Sponsored Links
Old 08-23-2015, 08:46 AM   #2
cotbu
Post Whore!
 
cotbu's Avatar
 
Join Date: Sep 2005
Location: SWFL
Age: 47
Posts: 3,318
Trader Rating: (3)
cotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nicecotbu is just really nice
Feedback Score: 3 reviews
You mean the nut no one puts back on?
Back on seat arm and hand between brake and accelerator open box end wrench and do it by feel just cracked it free then use your fingers.

Tip: Start with the hard ones first!

Sent from a Highly Tuned Note 4.5!!!
__________________

LoverTechnologies "Half Broken Things!"
cotbu is offline   Reply With Quote
Old 08-23-2015, 09:06 AM   #3
zombiewolf513
BANNED
 
Join Date: Mar 2011
Location: AZ
Age: 33
Posts: 1,682
Trader Rating: (6)
zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513 zombiewolf513
Feedback Score: 6 reviews
I use a ratcheting wrench on that one.

Like cotbu said, getting the hard one off first makes the whole process easier
zombiewolf513 is offline   Reply With Quote
Old 08-23-2015, 01:13 PM   #4
Croustibat
Nissanaholic!
 
Join Date: Aug 2011
Location: France - Toulouse
Age: 41
Posts: 1,851
Trader Rating: (0)
Croustibat is an unknown quantity at this point
Feedback Score: 0 reviews
Finally did it. I had to remove the seat and get on my back to access it ... what a nightmare ... The worst was actually setting and fitting the brake rod again, because i started screwing these 4 bolts first and of course it didn't line up

Now done. I will test tomorrow and see if my problem is still there. I had every symptom of pad knockback, but i changed everything brake related except the booster (and i say everything ... wheels, wheel bearings, spindles, suspension arms, brake discs, calipers, lines, master cylinder, purged a bazillion times, problem was still there)
Croustibat is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:37 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™