CA Another parts collection sale... supercharger, s14 apexi megaphone, etc... - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

*swayray* · 11-15-2010, 03:34 AM

Its time once again to get rid of all these parts I no longer have any use for since i'm taking time off from drifting or any kind of motorsports... most of them are used... but some are new... most of the parts are located at the south bay (Torrance/San Pedro) area and some in west covina. I don't mind bringing some of the parts to the west covina area since i'm up that area 5 days a week 12 hours per day. Well... on to my parts:

Thomas Knight Supercharger:

Picked this one up.... never had a chance to install... only less than 3k miles on it and still in perfect condition. It will require your intake runners, injectors, throttle body for install so it bolts right up and replaces your lower plenum. Will also include the idler pulley and belt. More mods required on your engine such as intake piping from the throttle body, n60 MAF, A/F controller which are not included. Price is for the supercharger and adapter plate only. $1350 OBO.

Pics:

Apexi Megaphone Catback exhaust for s14:

Used for about 2 month... love how it sounded on my s14 (pretty quiet) but i opted for a more stockish look. Has few scratches as pictured. The black stuff on the tip is from my bumper which can easily be scrapped off.$350 firm

Pics:

melted plastic from my rear bumper.

Nismo Long Hub Bolts 60mm for s13 or s14/z32 rears:

Picked these up as spares but have no use for them anymore. Brand new in box never had a chance to use them. $58

Pic:

180sx replica Rear valances:

A company called modiride borrowed my rear valances to make these replicas. I only used them when I go drifting so its beat up on certain spots as indicated on the pictures. Fitment is bleh but still fitted ok. $40 for the pair.

Pics:

4 lug hubs w/ extended Nismo studs:

Took this off of the track car when we did a 5 lug conversion. Hub bearings are still in good condition. Will include the front lower control arms and knuckles. $100 for the whole set.

15mm ichiba hubcentric slip on spacers.

These are in perfect condition. Works well with the extended studs on the hubs above listed. Will include 50mm ichiba extended studs. I've got two pairs. $100 for both pairs. PENDING

H&R 20mm hubcentric spacers for Toyota/Lexus and some Scions 5x114.3 bolt pattern. $40
10mm Machine shop brand hubcentric spacers also for Toyota/Lexus and some Scions 5x114.3 bolt pattern. $20

S13 SR20 used fan shroud:

Still in one piece... no cracks.. just dirty. $10

Melted spot but still good.

I don't have pics for these pictures yet but I should get them as soon.

Circuit sports Zenki Headlight covers:

I picked up these acrylic covers for a friend who flaked on my. They are brand new still in the box so they are in perfect condition. Take it at my cost for $120

Dmax Tie rod ends:
Picked this up as spare. Still brand new in box. You will need z32 inners, tein or Circuit sports inners for these to work. SOLD

KYB Shocks & struts / Eibach Spring combo w/ Tein camber plates:
SOLD

Used Brembo OE replacement rotors 4x114.3 bolt pattern:
SOLD

I may have more parts... just gotta check my storage room again.

Thanks for checking!

junkyiv · 11-16-2010, 10:13 PM

DAMNIT RAY!!!! Always when I don't have money! GLWS man.

smokin18 · 11-16-2010, 10:32 PM

just what ive been lookin for and no dang money

surferdon · 11-16-2010, 10:49 PM

Take $60 shipped to 91935 for a set of two spacers with the extended lugs?

240sxvaj · 11-16-2010, 10:56 PM

pix of front 5 lug and 15mm spacers

driftage240 · 11-16-2010, 11:01 PM

100 for four, four lug spacers right Ray Ray? by any chance the ichiba stub s14 front knurl? fingers crossed!

s14j · 11-17-2010, 12:45 AM

ray! i just got window visors at the nismo shop!
ahha

hey interested in thoues headlight covers,
100 picked up lmk!

lscustoms · 11-17-2010, 01:23 AM

hey ray its luis pepboys luis bro.... hey man hold those rotors im need them payyday is friday...

one_nissan · 11-17-2010, 03:14 AM

Are you willing to part the camber plates out. If so I take them off your hands lmk price. Pm with it. I'm in need of it, everything with it to install it on my kyb agx/gc setup.

Upsetter · 11-17-2010, 07:13 AM

Ill take the rotors. Where you located?

hardtime21 · 11-17-2010, 08:28 AM

If you would've posted this a month ago! I've been wanting a supercharger for a long time!

*swayray* · 11-17-2010, 02:06 PM

Thanks guys for your responses. I just answered all the pms but as for the spacers... I can't go lower than $100 since ichiba sells them for double that. Also the studs are brand new since I used the nismo studs on my hubs. The studs have 13mm knurl size for s13.

I would rather not part out the camber plates but I have someone pending on the whole shock kit.

Tom <3 (that's a sideways heart)

sorry s14j, $120 firm for the headlight covers. Since i didn't even open the box I don't want to sell it for less than how much i got them for. Thanks for picking up my last pair of visors though!

the rotors might be pending but i'll let you know if the guy flakes tonight luis...

s14j · 11-17-2010, 03:03 PM

humm let me see if i can get a few more bucks.
do they come with the sealer stuff?
illl let u know next weeek monday if u still got them!

*swayray* · 11-17-2010, 07:18 PM

unfortunately they don't. But if you bake your headlights in the oven for a few minutes enough for you to be able to take your old lenses out... you can just clip these in using the residue silicone left over and it will seal... that's what some other guy did and it worked.

mmctarsney · 11-17-2010, 10:09 PM

Bump for a cool guy! Shocks/struts sold to meeeee!

horubeets · 11-18-2010, 11:45 AM

Bump I wish I had cash for that exhaust.

Daggering · 11-18-2010, 01:06 PM

How Much For The Rear Rear Valance
Shipped To 11419

zylvia213 · 11-18-2010, 01:22 PM

thats one sexy exhaust.

NissanEnthus · 11-18-2010, 11:21 PM

What exhaust did you switch to? I have been looking for a good stock looking exhaust as well..GLWS

*swayray* · 11-19-2010, 01:05 PM

Quote:

Originally Posted by NissanEnthus

What exhaust did you switch to? I have been looking for a good stock looking exhaust as well..GLWS

I loved my borla catback so much off of my s13 that I hacked it into pieces and welded them back together to make it fit on my s14. I probably ended up spending too much just to get my borla to work on my s14.

NissanEnthus · 11-19-2010, 04:03 PM

Haha thats funny, but I guess I would do the same with my car. So its a dual tip exhaust?

*swayray* · 11-19-2010, 04:07 PM

my borla is. i also have my dual apexi n1 but its pretty beat from being low. no leaks though so i might get rid of that for $150.

PITCH · 11-19-2010, 04:41 PM

Willing to ship the supercharger?

Shift_Dr1ft · 11-19-2010, 04:50 PM

Cool supercharger! supercharged KA's are always unique!

r20crazy · 11-21-2010, 09:06 AM

thanks for the rotors sir. you have some positive feedback

*swayray* · 11-22-2010, 11:45 AM

all pm has been responded to... thx again robert for the feedback!

horubeets · 11-24-2010, 01:40 PM

Would you trade the exhaust for a hard drive and zenki se lip?

*swayray* · 11-24-2010, 07:21 PM

unfortunately i don't have any use for those parts...

Forge_55b · 11-24-2010, 07:29 PM

i love you long time for the supercharger ray

LifePlazaCircuit · 11-24-2010, 10:32 PM

nice parts for sale

glws

11-15-2010, 03:34 AM	#1
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	Another parts collection sale... supercharger, s14 apexi megaphone, etc... Its time once again to get rid of all these parts I no longer have any use for since i'm taking time off from drifting or any kind of motorsports... most of them are used... but some are new... most of the parts are located at the south bay (Torrance/San Pedro) area and some in west covina. I don't mind bringing some of the parts to the west covina area since i'm up that area 5 days a week 12 hours per day. Well... on to my parts: Thomas Knight Supercharger: Picked this one up.... never had a chance to install... only less than 3k miles on it and still in perfect condition. It will require your intake runners, injectors, throttle body for install so it bolts right up and replaces your lower plenum. Will also include the idler pulley and belt. More mods required on your engine such as intake piping from the throttle body, n60 MAF, A/F controller which are not included. Price is for the supercharger and adapter plate only. $1350 OBO. Pics: Apexi Megaphone Catback exhaust for s14: Used for about 2 month... love how it sounded on my s14 (pretty quiet) but i opted for a more stockish look. Has few scratches as pictured. The black stuff on the tip is from my bumper which can easily be scrapped off.$350 firm Pics: melted plastic from my rear bumper. Nismo Long Hub Bolts 60mm for s13 or s14/z32 rears: Picked these up as spares but have no use for them anymore. Brand new in box never had a chance to use them. $58 Pic: 180sx replica Rear valances: A company called modiride borrowed my rear valances to make these replicas. I only used them when I go drifting so its beat up on certain spots as indicated on the pictures. Fitment is bleh but still fitted ok. $40 for the pair. Pics: 4 lug hubs w/ extended Nismo studs: Took this off of the track car when we did a 5 lug conversion. Hub bearings are still in good condition. Will include the front lower control arms and knuckles. $100 for the whole set. 15mm ichiba hubcentric slip on spacers. These are in perfect condition. Works well with the extended studs on the hubs above listed. Will include 50mm ichiba extended studs. I've got two pairs. $100 for both pairs. PENDING H&R 20mm hubcentric spacers for Toyota/Lexus and some Scions 5x114.3 bolt pattern. $40 10mm Machine shop brand hubcentric spacers also for Toyota/Lexus and some Scions 5x114.3 bolt pattern. $20 S13 SR20 used fan shroud: Still in one piece... no cracks.. just dirty. $10 Melted spot but still good. I don't have pics for these pictures yet but I should get them as soon. Circuit sports Zenki Headlight covers: I picked up these acrylic covers for a friend who flaked on my. They are brand new still in the box so they are in perfect condition. Take it at my cost for $120 Dmax Tie rod ends: Picked this up as spare. Still brand new in box. You will need z32 inners, tein or Circuit sports inners for these to work. SOLD KYB Shocks & struts / Eibach Spring combo w/ Tein camber plates: SOLD Used Brembo OE replacement rotors 4x114.3 bolt pattern: SOLD I may have more parts... just gotta check my storage room again. Thanks for checking! __________________ http://www.thenismoshop.com Last edited by swayray; 11-24-2010 at 07:45 PM..

11-16-2010, 11:01 PM	#6
driftage240 Post Whore! Join Date: Sep 2005 Location: TUJUNGA Age: 37 Posts: 2,869 Trader Rating: (23) Feedback Score: 23 reviews	100 for four, four lug spacers right Ray Ray? by any chance the ichiba stub s14 front knurl? fingers crossed! __________________ Misty blu is coming 4 you!

11-17-2010, 01:23 AM	#8
lscustoms Zilvia FREAK! Join Date: Oct 2009 Location: West Covina Age: 30 Posts: 1,090 Trader Rating: (12) Feedback Score: 12 reviews	hey ray its luis pepboys luis bro.... hey man hold those rotors im need them payyday is friday... __________________

11-17-2010, 03:14 AM	#9
one_nissan Zilvia Junkie Join Date: May 2010 Location: Louisiana Age: 36 Posts: 313 Trader Rating: (14) Feedback Score: 14 reviews	Are you willing to part the camber plates out. If so I take them off your hands lmk price. Pm with it. I'm in need of it, everything with it to install it on my kyb agx/gc setup. __________________ Go to www.livemixtapes.com, sign up for free and download my boy Ray Vicks mixtapes for free. Support our independent label, Black Balloon Records. Download it and beat it down your block!!! Also look out for the up and coming Ray Vicks album featuring Lil Boosie recorded before he got locked up.

11-17-2010, 02:06 PM	#12
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	Thanks guys for your responses. I just answered all the pms but as for the spacers... I can't go lower than $100 since ichiba sells them for double that. Also the studs are brand new since I used the nismo studs on my hubs. The studs have 13mm knurl size for s13. I would rather not part out the camber plates but I have someone pending on the whole shock kit. Tom <3 (that's a sideways heart) sorry s14j, $120 firm for the headlight covers. Since i didn't even open the box I don't want to sell it for less than how much i got them for. Thanks for picking up my last pair of visors though! the rotors might be pending but i'll let you know if the guy flakes tonight luis... __________________ http://www.thenismoshop.com

11-16-2010, 10:13 PM	#2
junkyiv Zilvia Junkie Join Date: Sep 2007 Location: camarillo Age: 46 Posts: 406 Trader Rating: (2) Feedback Score: 2 reviews	DAMNIT RAY!!!! Always when I don't have money! GLWS man.

11-16-2010, 10:32 PM	#3
smokin18 Zilvia Addict Join Date: May 2010 Location: gainesville,ga Age: 48 Posts: 969 Trader Rating: (3) Feedback Score: 3 reviews	just what ive been lookin for and no dang money

11-16-2010, 10:49 PM	#4
surferdon Leaky Injector Join Date: Jun 2010 Location: Austin, TX Posts: 99 Trader Rating: (3) Feedback Score: 3 reviews	Take $60 shipped to 91935 for a set of two spacers with the extended lugs?

11-16-2010, 10:56 PM	#5
240sxvaj Nissanaholic! Join Date: Dec 2007 Location: So-Cal! Age: 31 Posts: 2,192 Trader Rating: (38) Feedback Score: 38 reviews	pix of front 5 lug and 15mm spacers

11-17-2010, 12:45 AM	#7
s14j Zilvia FREAK! Join Date: Oct 2009 Location: Hollywood Age: 30 Posts: 1,087 Trader Rating: (72) Feedback Score: 72 reviews	ray! i just got window visors at the nismo shop! ahha hey interested in thoues headlight covers, 100 picked up lmk!

11-17-2010, 07:13 AM	#10
Upsetter Zilvia Member Join Date: Nov 2009 Location: L.A. Age: 32 Posts: 270 Trader Rating: (6) Feedback Score: 6 reviews	Ill take the rotors. Where you located?

11-17-2010, 08:28 AM	#11
hardtime21 Zilvia Member Join Date: Mar 2010 Location: M-Town Age: 42 Posts: 249 Trader Rating: (19) Feedback Score: 19 reviews	If you would've posted this a month ago! I've been wanting a supercharger for a long time!

11-17-2010, 03:03 PM	#13
s14j Zilvia FREAK! Join Date: Oct 2009 Location: Hollywood Age: 30 Posts: 1,087 Trader Rating: (72) Feedback Score: 72 reviews	humm let me see if i can get a few more bucks. do they come with the sealer stuff? illl let u know next weeek monday if u still got them!

11-17-2010, 07:18 PM	#14
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	unfortunately they don't. But if you bake your headlights in the oven for a few minutes enough for you to be able to take your old lenses out... you can just clip these in using the residue silicone left over and it will seal... that's what some other guy did and it worked. __________________ http://www.thenismoshop.com

11-17-2010, 10:09 PM	#15
mmctarsney Join Date: Feb 2010 Location: Fontana Age: 32 Posts: 15 Trader Rating: (2) Feedback Score: 2 reviews	Bump for a cool guy! Shocks/struts sold to meeeee!

11-18-2010, 11:45 AM	#16
horubeets Zilvia Member Join Date: Jan 2006 Location: Los Angeles Posts: 162 Trader Rating: (10) Feedback Score: 10 reviews	Bump I wish I had cash for that exhaust.

11-18-2010, 01:06 PM	#17
Daggering Zilvia Addict Join Date: Apr 2010 Location: Queens Ny Age: 29 Posts: 904 Trader Rating: (2) Feedback Score: 2 reviews	How Much For The Rear Rear Valance Shipped To 11419 __________________ WTB- Type X Part's

11-18-2010, 01:22 PM	#18
zylvia213 Nissanaholic! Join Date: Aug 2007 Location: LOST ANGELES Posts: 1,975 Trader Rating: (36) Rides Gallery: zylvia213 Feedback Score: 36 reviews	thats one sexy exhaust. __________________

11-18-2010, 11:21 PM	#19
NissanEnthus Zilvia Addict Join Date: Sep 2010 Location: Orange County Age: 42 Posts: 800 Trader Rating: (9) Feedback Score: 9 reviews	What exhaust did you switch to? I have been looking for a good stock looking exhaust as well..GLWS

11-19-2010, 04:03 PM	#21
NissanEnthus Zilvia Addict Join Date: Sep 2010 Location: Orange County Age: 42 Posts: 800 Trader Rating: (9) Feedback Score: 9 reviews	Haha thats funny, but I guess I would do the same with my car. So its a dual tip exhaust?

11-19-2010, 04:07 PM	#22
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	my borla is. i also have my dual apexi n1 but its pretty beat from being low. no leaks though so i might get rid of that for $150. __________________ http://www.thenismoshop.com

11-19-2010, 04:41 PM	#23
PITCH Zilvia FREAK! Join Date: Jan 2006 Location: GA Age: 40 Posts: 1,103 Trader Rating: (5) Feedback Score: 5 reviews	Willing to ship the supercharger? __________________

11-19-2010, 04:50 PM	#24
Shift_Dr1ft Zilvia Member Join Date: Dec 2007 Location: SoCali Age: 34 Posts: 224 Trader Rating: (6) Feedback Score: 6 reviews	Cool supercharger! supercharged KA's are always unique!

11-21-2010, 09:06 AM	#25
r20crazy Zilvia Junkie Join Date: Mar 2010 Location: 90501 Posts: 593 Trader Rating: (41) Feedback Score: 41 reviews	thanks for the rotors sir. you have some positive feedback

11-22-2010, 11:45 AM	#26
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	all pm has been responded to... thx again robert for the feedback! __________________ http://www.thenismoshop.com

11-24-2010, 01:40 PM	#27
horubeets Zilvia Member Join Date: Jan 2006 Location: Los Angeles Posts: 162 Trader Rating: (10) Feedback Score: 10 reviews	Would you trade the exhaust for a hard drive and zenki se lip?

11-24-2010, 07:21 PM	#28
swayray Premium Member Join Date: Aug 2005 Location: torrance Posts: 1,017 Trader Rating: (23) Rides Gallery: swayray Feedback Score: 23 reviews	unfortunately i don't have any use for those parts... __________________ http://www.thenismoshop.com

11-24-2010, 07:29 PM	#29
Forge_55b Zilvia Junkie Join Date: Jun 2007 Location: OC Age: 39 Posts: 414 Trader Rating: (2) Feedback Score: 2 reviews	i love you long time for the supercharger ray

11-24-2010, 10:32 PM	#30
LifePlazaCircuit Zilvia FREAK! Join Date: Sep 2008 Location: 91744 Age: 34 Posts: 1,181 Trader Rating: (36) Feedback Score: 36 reviews	nice parts for sale glws __________________ sugar we're going down

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode