S13 Q45 Altima Rotor swap update - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

s13Llama · 08-08-2008, 07:31 PM

Hey guys, I finally got around to my Q45 front brake swap. I opted to use 94 Altima rotors so I wouldn't have to drill for 5 lug. It took me about 1 hour and 40 minutes to finish, even with a minor delay. The only modification I had to do to my car was to cut away the splash guard for my old rotors. Q45 calipers clear stock teardrops and SE wheels by about 1/4 to 1/2 and inch

Running them with Axis pads.

Price breakdown: (may differ by location)

Pair of used Q45 calipers off a '95 I believe. seals were good. $50
Pair of new '94 Alitma rotors (you can use '94-'00 is what I was told) $47
Axxis pads, high performance model, about $70 shipped
40% more stopping power, and hearing the fronts lock up before the rears: Priceless...

los_inc · 08-08-2008, 08:01 PM

pix or it didn't happen
-los

*s13 @ fullboost* · 08-08-2008, 08:01 PM

haha ^^^agreed pics or it didn't happen =]

MikeisNissan · 08-08-2008, 10:28 PM

i did it.. i can show you pics. Im using asbestos for now. brb Oh and I have brembos slotte rotors and my caliper is blaack.

*wangan_cruiser* · 08-08-2008, 10:34 PM

yea show some pics. basically itll turn out into a good write up if you posted pics. step by step

MikeisNissan · 08-08-2008, 10:53 PM

^Mines, peak performance extended studs, goodridge ss lines, stock rear w/ studs & ss lines. Oh and on a 97' S14

altalti · 08-09-2008, 10:09 AM

I am 100% sure this has been answered numerous times but. You use the your stock brake hoses with this swap? Also did you need to buy the q45 hardware kit? Lastly are you sure model year 1995 calipers will work. Sorry for the thread jacking but you seem to know the answers since you have experience.

UNISA JECS · 08-09-2008, 10:15 AM

I advise against doing this crap the Altima rotors are only 22mm thick, the Q45 calipers calls for 28mm thick rotor, just drill the Q45 rotors to 4 lug if you have to.

MikeisNissan · 08-09-2008, 06:20 PM

But mine fits perfect, and stops on a dime.

MikeisNissan · 08-09-2008, 06:22 PM

Actually this guy is talking about the Altima, I am using Sentra Spec-V rotors.. my badd.

UNISA JECS · 08-09-2008, 07:14 PM

Quote:

Originally Posted by MikeisNissan

Actually this guy is talking about the Altima, I am using Sentra Spec-V rotors.. my badd.

Q45
280 mm x 28 mm
(11.02 in x 1.10 in)

Even Spec-V rotors wont work, and the B15 Base is still coming up short 4mm:

B15 Spec-V
320 mm × 28.0 mm
(12.60 in × 1.102 in)

B15 SE-R
296 mm × 26.0 mm

(11.65 in × 1.024 in)

B15 Sentra Base Model
280 mm × 24.0 mm

(11.02 in × 0.945 in)

s13Llama · 08-09-2008, 08:49 PM

Sorry for the lack of pics, can't really show pics of the process now, but I can show some finished pics. I will see what I can do.
Altalti, I did use all the stock brake lines, works like a charm, but for the price, I would seriously reccomend steel braided lines.
I did a bit of research, and the Altima rotors are thinner. It is a preference choice. I would prefer to replace rotors a month or so sooner, than to have to drill Q45's. This is coming from a dude with a shop and a drill press too... I am just a lazy 240 slob lol. ohh yea, and about $22 bucks a piece for Altima rotors, can't beat that deal.

*Jonnie Fraz* · 08-09-2008, 09:02 PM

Ok you guys... here is my buddies write up on his site. He does crazy documentation of his builds.
Mestiso's Q45 brake write up

MikeisNissan · 08-09-2008, 11:19 PM

Yeah? Hmm I dunno but I do know that it fits nice and snug and it works!

UNISA JECS · 08-10-2008, 12:13 AM

Quote:

Originally Posted by MikeisNissan

Yeah? Hmm I dunno but I do know that it fits nice and snug and it works!

Even 20mm will work and stop 10x better than stock just on the sheer brake torque you are gaining by having a 11" rotor but it still doesn't make it correct, but it doesn;t amaze me though, rock on dude, happy braking.

projectRDM · 08-10-2008, 10:46 AM

Agreed. Keep an eye on pad wear, you'd hate to get them thin enough to fall out of the caliper. You'd be surprised how often that happens with narrower rotors.

ranger2339 · 09-01-2008, 10:07 AM

Ok oldish thread, but I am about to get some rotors for my Q45s, what rotors do people get, that are the "correct" size?

Josh

UNISA JECS · 09-01-2008, 10:28 AM

Quote:

Originally Posted by ranger2339

Ok oldish thread, but I am about to get some rotors for my Q45s, what rotors do people get, that are the "correct" size?

Josh

Q45 rotors are the only rotors that are the correct size, if you need them in 4 lug you have to redrill them.

08-08-2008, 07:31 PM	#1
s13Llama Join Date: Jan 2008 Location: San Mateo Age: 32 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	S13 Q45 Altima Rotor swap update Hey guys, I finally got around to my Q45 front brake swap. I opted to use 94 Altima rotors so I wouldn't have to drill for 5 lug. It took me about 1 hour and 40 minutes to finish, even with a minor delay. The only modification I had to do to my car was to cut away the splash guard for my old rotors. Q45 calipers clear stock teardrops and SE wheels by about 1/4 to 1/2 and inch Running them with Axis pads. Price breakdown: (may differ by location) Pair of used Q45 calipers off a '95 I believe. seals were good. $50 Pair of new '94 Alitma rotors (you can use '94-'00 is what I was told) $47 Axxis pads, high performance model, about $70 shipped 40% more stopping power, and hearing the fronts lock up before the rears: Priceless... __________________ If you think my hatch is fast, you should see my gixxer!

08-08-2008, 08:01 PM	#2
los_inc Zilvia Addict Join Date: Apr 2006 Location: New Joisey Bro. Age: 37 Posts: 826 Trader Rating: (15) Feedback Score: 15 reviews	pix or it didn't happen -los __________________

08-08-2008, 08:01 PM	#3
s13 @ fullboost Spirit Of Ecstasy Join Date: Dec 2007 Location: Simi Valley, CA Posts: 2,531 Trader Rating: (15) Feedback Score: 15 reviews	haha ^^^agreed pics or it didn't happen =] __________________

08-08-2008, 10:28 PM	#4
MikeisNissan Post Whore! Join Date: Jun 2006 Location: Earth, Section 301 Posts: 3,730 Trader Rating: (1) Feedback Score: 1 reviews	i did it.. i can show you pics. Im using asbestos for now. brb Oh and I have brembos slotte rotors and my caliper is blaack. __________________ 因果関係の流れ

08-08-2008, 10:53 PM	#6
MikeisNissan Post Whore! Join Date: Jun 2006 Location: Earth, Section 301 Posts: 3,730 Trader Rating: (1) Feedback Score: 1 reviews	^Mines, peak performance extended studs, goodridge ss lines, stock rear w/ studs & ss lines. Oh and on a 97' S14 __________________ 因果関係の流れ

08-08-2008, 10:34 PM	#5
wangan_cruiser kouki man Join Date: Apr 2006 Location: downtown oakland,ca Age: 36 Posts: 3,535 Trader Rating: (36) Feedback Score: 36 reviews	yea show some pics. basically itll turn out into a good write up if you posted pics. step by step

08-09-2008, 10:09 AM	#7
altalti Zilvia Junkie Join Date: Jul 2005 Location: va beach virginia Posts: 597 Trader Rating: (15) Feedback Score: 15 reviews	I am 100% sure this has been answered numerous times but. You use the your stock brake hoses with this swap? Also did you need to buy the q45 hardware kit? Lastly are you sure model year 1995 calipers will work. Sorry for the thread jacking but you seem to know the answers since you have experience.

08-09-2008, 10:15 AM	#8
UNISA JECS Nissanaholic! Join Date: Feb 2007 Location: Socal Fontana Age: 42 Posts: 2,372 Trader Rating: (40) Feedback Score: 40 reviews	I advise against doing this crap the Altima rotors are only 22mm thick, the Q45 calipers calls for 28mm thick rotor, just drill the Q45 rotors to 4 lug if you have to. __________________ PARTS 4 SALE !! Z32 E-Brake/Parking Brake Heatshield Assemblys!!! *Rep/Feedbacks*

08-09-2008, 06:20 PM	#9
MikeisNissan Post Whore! Join Date: Jun 2006 Location: Earth, Section 301 Posts: 3,730 Trader Rating: (1) Feedback Score: 1 reviews	But mine fits perfect, and stops on a dime. __________________ 因果関係の流れ

08-09-2008, 06:22 PM	#10
MikeisNissan Post Whore! Join Date: Jun 2006 Location: Earth, Section 301 Posts: 3,730 Trader Rating: (1) Feedback Score: 1 reviews	Actually this guy is talking about the Altima, I am using Sentra Spec-V rotors.. my badd. __________________ 因果関係の流れ

08-09-2008, 08:49 PM	#12
s13Llama Join Date: Jan 2008 Location: San Mateo Age: 32 Posts: 23 Trader Rating: (0) Feedback Score: 0 reviews	Sorry for the lack of pics, can't really show pics of the process now, but I can show some finished pics. I will see what I can do. Altalti, I did use all the stock brake lines, works like a charm, but for the price, I would seriously reccomend steel braided lines. I did a bit of research, and the Altima rotors are thinner. It is a preference choice. I would prefer to replace rotors a month or so sooner, than to have to drill Q45's. This is coming from a dude with a shop and a drill press too... I am just a lazy 240 slob lol. ohh yea, and about $22 bucks a piece for Altima rotors, can't beat that deal. __________________ If you think my hatch is fast, you should see my gixxer!

08-09-2008, 09:02 PM	#13
Jonnie Fraz Premium Member Join Date: Jan 2005 Location: Cali Age: 53 Posts: 1,371 Trader Rating: (29) Rides Gallery: Jonnie Fraz Feedback Score: 29 reviews	Ok you guys... here is my buddies write up on his site. He does crazy documentation of his builds. Mestiso's Q45 brake write up __________________ Stealth-Custom-Fab.com

08-09-2008, 11:19 PM	#14
MikeisNissan Post Whore! Join Date: Jun 2006 Location: Earth, Section 301 Posts: 3,730 Trader Rating: (1) Feedback Score: 1 reviews	Yeah? Hmm I dunno but I do know that it fits nice and snug and it works! __________________ 因果関係の流れ

08-10-2008, 10:46 AM	#16
projectRDM Post Whore! Join Date: Dec 2002 Location: Atlanta Age: 47 Posts: 13,812 Trader Rating: (12) Feedback Score: 12 reviews	Agreed. Keep an eye on pad wear, you'd hate to get them thin enough to fall out of the caliper. You'd be surprised how often that happens with narrower rotors. __________________ FORMERLY R240NA Learn what's really going on and protect your assets now before they're gone forever: www.paypalsucks.com

09-01-2008, 10:07 AM	#17
ranger2339 Zilvia Junkie Join Date: May 2006 Location: MINNESOTA Age: 40 Posts: 520 Trader Rating: (1) Feedback Score: 1 reviews	Ok oldish thread, but I am about to get some rotors for my Q45s, what rotors do people get, that are the "correct" size? Josh

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode