10" wheel- what size offset on s14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

gman-s14 · 11-20-2009, 07:29 AM

any pic's. i dont want to flare the fenders or widebody... just want to tuck 10" width rims with just rolling the fenders. i'm running a concave wheel.

*fliprayzin240sx* · 11-21-2009, 07:08 PM

Quote:

Originally Posted by gman-s14

any pic's. i dont want to flare the fenders or widebody... just want to tuck 10" width rims with just rolling the fenders. i'm running a concave wheel.

Search thru the wheel fitment thread. Its not hard to tuck 10" wide rims on an S14. Also, offset is not the only thing you have to consider, you'd have to think about how wide of tires you want to run. Skinnier, stretched tires means lower offset. Higher offset will afford you wider tires. Then you still have to consider your camber. More camber will tuck more tires under the fender.

spooled240 · 11-21-2009, 07:20 PM

i have a 18x9 +25 out back and it's pretty flush at stock camber specs (1 degree) but i have like 2 inches on the inside before i start hitting the coilover...so if you want max rubber at zero/low camber i'd say a 18x10 +30 or +35?

11-20-2009, 07:29 AM	#1
gman-s14 Zilvia Member Join Date: Jun 2009 Location: northern nj Posts: 174 Trader Rating: (9) Feedback Score: 9 reviews	10" wheel- what size offset on s14 any pic's. i dont want to flare the fenders or widebody... just want to tuck 10" width rims with just rolling the fenders. i'm running a concave wheel. Last edited by gman-s14; 11-20-2009 at 08:04 AM..

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

11-21-2009, 07:20 PM	#3
spooled240 Post Whore! Join Date: Mar 2008 Location: San Diego, CA Posts: 4,140 Trader Rating: (27) Feedback Score: 27 reviews	i have a 18x9 +25 out back and it's pretty flush at stock camber specs (1 degree) but i have like 2 inches on the inside before i start hitting the coilover...so if you want max rubber at zero/low camber i'd say a 18x10 +30 or +35?