SR20 Redtop install help in NJ? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

cinek10 · 07-11-2008, 08:45 AM

I did my SR swap and the engine cranked and wouldn't start, now it doesn't even turn anymore. If somebody is willing to help out for some breakfast beers / food LMK. I'm in central NJ 08879

elfenguard911 · 07-11-2008, 09:43 AM

hows the timing?

cinek10 · 07-11-2008, 09:47 AM

Quote:

Originally Posted by elfenguard911

hows the timing?

That's the first thing i'll be doing sat morning. Would CAS cause the engine not to crank at all?

aNskY · 07-11-2008, 08:27 PM

no it'll still turn it just wont start. check the signal wire to your starter (butt splice type plug onto the tab on the starter)

check your timing once its crankin. do you have fuel? spark?

cinek10 · 07-14-2008, 12:08 PM

I reset the CAS on Saturday, after i checked all the wiring i did after making sure every wire was right and i started looking under the steering wheel, it turns out that the clutch pedal wasn't pressing on the clutch safety button thing...

My baby runs great! I just need to verify that the timing is right!

Thanks for the help !!

07-11-2008, 08:45 AM	#1
cinek10 Leaky Injector Join Date: Aug 2006 Location: Think With Your Dipstick Jimmy!!! Age: 36 Posts: 141 Trader Rating: (3) Feedback Score: 3 reviews	SR20 Redtop install help in NJ? I did my SR swap and the engine cranked and wouldn't start, now it doesn't even turn anymore. If somebody is willing to help out for some breakfast beers / food LMK. I'm in central NJ 08879

07-11-2008, 09:43 AM	#2
elfenguard911 Zilvia Member Join Date: Jan 2008 Location: norristown Age: 32 Posts: 179 Trader Rating: (0) Feedback Score: 0 reviews	hows the timing? __________________ [/SIGPIC]meow mix or kibbles & bits? try to b***h now

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

07-11-2008, 08:27 PM	#4
aNskY Nissanaholic! Join Date: Apr 2005 Location: NY Age: 37 Posts: 1,604 Trader Rating: (10) Feedback Score: 10 reviews	no it'll still turn it just wont start. check the signal wire to your starter (butt splice type plug onto the tab on the starter) check your timing once its crankin. do you have fuel? spark?

07-14-2008, 12:08 PM	#5
cinek10 Leaky Injector Join Date: Aug 2006 Location: Think With Your Dipstick Jimmy!!! Age: 36 Posts: 141 Trader Rating: (3) Feedback Score: 3 reviews	I reset the CAS on Saturday, after i checked all the wiring i did after making sure every wire was right and i started looking under the steering wheel, it turns out that the clutch pedal wasn't pressing on the clutch safety button thing... My baby runs great! I just need to verify that the timing is right! Thanks for the help !!