Skyline r32 spark question - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

jdmcivic1999 · 09-23-2017, 10:33 PM

I need help, i've done research and cant find anything that helps. I have a 1990 skyline gtr which is having issues starting. When you try and start the engine with the key, the engine gets no spark to any cylinder and just cranks over. When you pull the crank/cam sensor off (and leave key in "on" position) and manually turn it, all cylinders get spark. I've tried it with 2 separate CAS

What would cause this? I've replaced, igniter pack, CAS senson, and spark plugs

Thanks

Sileighty_85 · 09-24-2017, 04:06 PM

Check to make sure the Alignment dowel on the camshaft for the cas has not boken off

jdmcivic1999 · 10-10-2017, 11:08 AM

keys are not broken. If you manually turn the CAS and get spark and put it back in place sometimes it will start. After it starts and let it run for 20-30 mins and turn off car will start right back up. But if it sits for 15mins or so it wont start and same problem all over again

09-23-2017, 10:33 PM	#1
jdmcivic1999 Leaky Injector Join Date: Jan 2010 Location: Edmonds, Wa Posts: 53 Trader Rating: (4) Feedback Score: 4 reviews	Skyline r32 spark question I need help, i've done research and cant find anything that helps. I have a 1990 skyline gtr which is having issues starting. When you try and start the engine with the key, the engine gets no spark to any cylinder and just cranks over. When you pull the crank/cam sensor off (and leave key in "on" position) and manually turn it, all cylinders get spark. I've tried it with 2 separate CAS What would cause this? I've replaced, igniter pack, CAS senson, and spark plugs Thanks

09-24-2017, 04:06 PM	#2
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Check to make sure the Alignment dowel on the camshaft for the cas has not boken off __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

10-10-2017, 11:08 AM	#3
jdmcivic1999 Leaky Injector Join Date: Jan 2010 Location: Edmonds, Wa Posts: 53 Trader Rating: (4) Feedback Score: 4 reviews	keys are not broken. If you manually turn the CAS and get spark and put it back in place sometimes it will start. After it starts and let it run for 20-30 mins and turn off car will start right back up. But if it sits for 15mins or so it wont start and same problem all over again