Gas pedal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

untitled23 · 02-13-2011, 08:37 PM

I just bought a 89 S13. Sometimes the gas pedal will get stuck up and will have to give it a good push to get it unstuck and itll rev to around 4k when you do this.is there any know reason that it gets stuck. its a ka24e.

daveygts · 02-13-2011, 08:48 PM

Check the throttle line from motor all the way to pedal there might be something stuck or something in the linkage spray wd 40 and see if that frees it up

carcrzy920 · 02-14-2011, 10:31 PM

try to turn the throttle body by hand and if it sticks then you probably have some carbon built up in there and its holding the butterfly shut. mine used to do that cuz the motor sat for a while, i just opened it up and took a small brush in there with some carb cleaner and it stopped sticking.

02-13-2011, 08:37 PM	#1
untitled23 Join Date: Oct 2010 Location: Eastern Shore,MD Age: 27 Posts: 33 Trader Rating: (0) Feedback Score: 0 reviews	Gas pedal I just bought a 89 S13. Sometimes the gas pedal will get stuck up and will have to give it a good push to get it unstuck and itll rev to around 4k when you do this.is there any know reason that it gets stuck. its a ka24e.

02-14-2011, 10:31 PM	#3
carcrzy920 Zilvia Junkie Join Date: Sep 2008 Location: va Age: 29 Posts: 548 Trader Rating: (24) Feedback Score: 24 reviews	try to turn the throttle body by hand and if it sticks then you probably have some carbon built up in there and its holding the butterfly shut. mine used to do that cuz the motor sat for a while, i just opened it up and took a small brush in there with some carb cleaner and it stopped sticking. __________________ I'm so JDM i sleep on the right side of the bed.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-13-2011, 08:48 PM	#2
daveygts Zilvia Member Join Date: Feb 2009 Location: bubank Age: 41 Posts: 235 Trader Rating: (3) Feedback Score: 3 reviews	Check the throttle line from motor all the way to pedal there might be something stuck or something in the linkage spray wd 40 and see if that frees it up