Will these wheels fit well? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

11Past9 · 02-02-2010, 09:46 PM

I am looking to buy some Enkei RPF1 17x9 in SBC finish but they are +35 offset. I am an offset newb but was always told I want +20 or less if I'm going to run 9 inches wide all around.

I have a 1998 S14 with Tokiko struts and s tech springs and will be putting 235/45's on the wheels.

What will it fit like? I just want it to look good, not stick out, not look akward, just look like it belongs. I do not have rolled fenders.

I searched, and reffering me to a 275 page wheel whore thread that consists 99% of the wheel set ups being on slammed 240's with rolled fenders and can barely fit a card between the tire and the fender...

Someone just help me out.

*fliprayzin240sx* · 02-02-2010, 10:53 PM

Jesus, how many threads about this bullshit do you seriously have to make? We told you already...do you want us to hold your fucking hands about everything?

God, go to NICO for stupid shit like this...

***S13SilviaGirl*** · 02-03-2010, 12:48 AM

In all honesty, it depends on what YOU want. For me that kind of fitment would look like ass...but that is me personally. That sizing would be a little better than stock fitment, and not stick out. +15 would be more ideal....but again, just my opinion.

Ray Ray.... play nice.

11Past9 · 02-03-2010, 05:19 AM

The lowest offset they come in is +22. would that be better?

Max_PSi · 02-03-2010, 02:33 PM

17x9 +15 fits perfect all around on S14's. My JIC's are that offset.

+22 won't be that bad though.

slow40sx · 02-03-2010, 02:48 PM

for a 9 inch wide wheel i'd go with an offset closer to zero, but thats just me, and are u sure they only come in +22??? i'm pretty sure if u call them they could give u better idea of what offsets they can do for u

***enkei2k*** · 02-03-2010, 03:00 PM

Quote:

Originally Posted by fliprayzin240sx

Jesus, how many threads about this bullshit do you seriously have to make? We told you already...do you want us to hold your fucking hands about everything?

God, go to NICO for stupid shit like this...

QFT

just buy it and make it fit. if you need spacers, buy spacers. if you needa roll, roll. if you need widebody, go widebody.

and for the record, go 235/40.

/thread.

jspaeth · 02-03-2010, 03:19 PM

Quote:

Originally Posted by slow40sx

for a 9 inch wide wheel i'd go with an offset closer to zero, but thats just me, and are u sure they only come in +22??? i'm pretty sure if u call them they could give u better idea of what offsets they can do for u

I have 17x9 +17 all the way around and they are pretty flush. Depending on how slammed you are and how "square" (i.e. not stretched) your tire sidewalls are, you will be good.

I had to do some minor rolling/pulling, and now the top edge of the sidewall sits just inside the lip, and when I hit bumps, the camber gain causes the tire to just sneak inside the lip of the fender.

Also, 245/40/17 would be better looking/fitting than 235/45/17, as 235/45/17 will be a little too tall relative to stock.

11Past9 · 02-03-2010, 03:23 PM

The reason is I have a set of basically new potenza reo1r 235 45's that I don't want to waste.

The guy I am getting them off of only has as low as +22, he is getting me SBC RPF1's 17x9 for $235 per wheel shipped. Which is a hell of a deal. $940 total shipped.

I only have tokiko blue shocks and s tech springs. I'm running evo wheels now which are 17x8 and +30 or +35 I believe.

I just want it to be flush and not look stupid and stick out or be too sunken in.

ayuaddict · 02-03-2010, 03:34 PM

with a shock spring combo, your main concern is going to be the height of the tire (the over all diameter) so measure that and make sure it will fit, and +22 will work fine as far as fitment goes, you will need to roll your fenders which is really not difficult at all and if you're careful you will not chip the paint.

02-02-2010, 09:46 PM	#1
11Past9 Leaky Injector Join Date: Oct 2009 Location: PA Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	Will these wheels fit well? I am looking to buy some Enkei RPF1 17x9 in SBC finish but they are +35 offset. I am an offset newb but was always told I want +20 or less if I'm going to run 9 inches wide all around. I have a 1998 S14 with Tokiko struts and s tech springs and will be putting 235/45's on the wheels. What will it fit like? I just want it to look good, not stick out, not look akward, just look like it belongs. I do not have rolled fenders. I searched, and reffering me to a 275 page wheel whore thread that consists 99% of the wheel set ups being on slammed 240's with rolled fenders and can barely fit a card between the tire and the fender... Someone just help me out.

02-02-2010, 10:53 PM	#2
fliprayzin240sx Man w/ CTSV & a Car Seat Join Date: Aug 2002 Location: Tampa Posts: 17,998 Trader Rating: (19) Rides Gallery: fliprayzin240sx Feedback Score: 19 reviews	Jesus, how many threads about this bullshit do you seriously have to make? We told you already...do you want us to hold your fucking hands about everything? God, go to NICO for stupid shit like this... __________________ If you think Zilvia has too many assholes... CLICK HERE!!!

02-03-2010, 02:48 PM	#6
slow40sx Nissanaholic! Join Date: Jul 2007 Location: Virginia Beach Posts: 1,979 Trader Rating: (3) Feedback Score: 3 reviews	for a 9 inch wide wheel i'd go with an offset closer to zero, but thats just me, and are u sure they only come in +22??? i'm pretty sure if u call them they could give u better idea of what offsets they can do for u __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

02-03-2010, 05:19 AM	#4
11Past9 Leaky Injector Join Date: Oct 2009 Location: PA Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	The lowest offset they come in is +22. would that be better?

02-03-2010, 02:33 PM	#5
Max_PSi Zilvia Junkie Join Date: Aug 2005 Location: NY Age: 42 Posts: 480 Trader Rating: (10) Rides Gallery: Max_PSi Feedback Score: 10 reviews	17x9 +15 fits perfect all around on S14's. My JIC's are that offset. +22 won't be that bad though.

02-03-2010, 03:23 PM	#9
11Past9 Leaky Injector Join Date: Oct 2009 Location: PA Posts: 148 Trader Rating: (0) Feedback Score: 0 reviews	The reason is I have a set of basically new potenza reo1r 235 45's that I don't want to waste. The guy I am getting them off of only has as low as +22, he is getting me SBC RPF1's 17x9 for $235 per wheel shipped. Which is a hell of a deal. $940 total shipped. I only have tokiko blue shocks and s tech springs. I'm running evo wheels now which are 17x8 and +30 or +35 I believe. I just want it to be flush and not look stupid and stick out or be too sunken in.

02-03-2010, 03:34 PM	#10
ayuaddict Post Whore! Join Date: Jan 2006 Location: Socal Age: 32 Posts: 4,017 Trader Rating: (9) Feedback Score: 9 reviews	with a shock spring combo, your main concern is going to be the height of the tire (the over all diameter) so measure that and make sure it will fit, and +22 will work fine as far as fitment goes, you will need to roll your fenders which is really not difficult at all and if you're careful you will not chip the paint.