DILLONDILLONDILLON!

WHATSUP GUYS! My name is DILLON!!
(Hence the thread title)
SKIP AHEAD IF YOU DO NOT CARE LOL
**Alittle about myself.**
I am a Nissan Certified Technician threw Nascar Technicial Institute.
Worked at a Nissan dealership as a tech for about 2 years.
Decided to change it up and now i work in the parts department at NISSAN WORLD OF SPRINGFIELD, NJ
IF ANYONE WOULD LIKE PRICING ON PARTS AND AVAILABILITY

PLEASE PM ME WITH VEHICLE INFO. (VIN WORKS THE BEST)
So i picked the car up from CT about a year ago for 1700$
It is a 1992 240sx base basically stock only rust was under the battery tray
I dont have the original pictures from purchase but you get the idea.



PHASE 1: SUSPENSION
So im starting with suspension. I wanted to put a good amount of attention to making the car handle amazing and be very linear.
*Purchased poly urethane subframe bushings.
*Drilled burnt and wire brushed out the old rotten bushings.
*Used a 3M product that we use at nissan for undercoating.
*Always use silicone grease on poly urethane bushings to prevent squeeks.

Attached Images

	bushings.jpg (156.0 KB, 7 views)
	rear suspension out.jpg (186.9 KB, 6 views)
	bushing removal.jpg (304.0 KB, 5 views)
	burn baby burn.jpg (243.3 KB, 4 views)
	bare subframe.jpg (249.0 KB, 5 views)
	installed.jpg (210.5 KB, 5 views)
	CORRECTED4.jpg (162.4 KB, 7 views)
	CORRECTED3.jpg (276.2 KB, 8 views)
	CORRECTED5.jpg (178.8 KB, 5 views)
	IMG_20140702_232019.jpg (145.0 KB, 5 views)
	IMG_20140702_231228.jpg (187.9 KB, 4 views)
	IMG_20140702_231355.jpg (125.5 KB, 6 views)
	IMG_20140702_231519.jpg (250.2 KB, 5 views)
	IMG_20140702_231722.jpg (221.1 KB, 7 views)