KA24 Engine build, JE pistons, Port and Polish, Full Race turbo manifold - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

tunermt · 11-17-2011, 01:11 AM

Recently put a fresh engine into my S13, the stock KA24e had proven its worth after 6 years of boost at the track and on the streets but with an extra engine floating around why not throw something fresh in the car?

Basic engine build details:
OEM crank
OEM rods (vertical smoothing of all the casting marks)
ACL bearings
ARP head studs
ARP main studs
ARP rod bolts
Port and Polish (gasket matched head/manifolds)
JE forged pistons with (skirt coating) about 9:1 compression
OEM valves

Will also be doing a new cam and solid rocker arms shortly (hydrolic rocker arms failing above ~5300 rpm)

Car is currently using a AEM EMS, ID1000cc injectors and Full Race manifold with a tiny t25 and 38mm tial waste gate.

Thanks to the new injectors we will now be able to really push this turbo and see what kind of torque can be made with 20+ psi.

An early graph after the first E tune revision, just need to lean things out a bit more and start adding boost.

**please not the new graph was done in 4th gear VS 3rd gear**

natejackson · 12-21-2011, 05:23 PM

Damn Fran shit baller as usual.

babillaracing · 12-22-2011, 12:46 PM

nice set up sir

tunermt · 12-23-2011, 11:39 PM

The new year will bring new results with more boost

tunermt · 12-29-2011, 04:26 AM

no new results quite yet but here's a non dyno related picture haha

tapdeznutz · 01-09-2012, 12:23 AM

subscribing. wow all that on a single slammer and t25, good to know

240sohc · 01-10-2012, 09:41 PM

im tuning in as well...

tapdeznutz · 01-13-2012, 12:13 PM

i was taking to my buddy last nite very knowlegdeable on sr's etc. he saids that the ka stock rods are shit. what your opinion. i thought i read here that peeps running stock botton end to like well over 300hp. im confused

waxball88 · 01-13-2012, 12:30 PM

Your friend is an idiot. The pistons are the weak part

tapdeznutz · 01-13-2012, 01:26 PM

Quote:

Originally Posted by waxball88

Your friend is an idiot. The pistons are the weak part

nah he more an sr guy is all. he KNOWS his shit. he was just going off the thought of doing it the right way the first time where as im trying to keep it as much stock as possible trying to keep it low budget u know. as besides we will be doing my tuning so i hope he's not lol

Walperstyle · 01-13-2012, 01:43 PM

the weakest part is obviously debating on the internet

natejackson · 01-13-2012, 07:05 PM

Everyone calls out the ka, whether or not they kwow it or not. I made over 300rwhp on the stock bottom end @14psi for over 30k w/ a td0620g. Tunermt last setup was a stock bottom end I [email protected] 14psi ran well & long. Fran(tunermt) brew-tuned my new setup @16psi and made 386 rwhp and 341rwtq with shity MT 91 octane. So the ka24 can hang with the sr20 if tuned right and built right!!!

cnile51 · 01-13-2012, 07:48 PM

You can make solid numbers with a ka. Here's a video of one we did. The tq. is the best part: YouTube - Broadcast Yourself.

Tuning into this thread for this updated build.

mikemontanti · 01-16-2012, 01:46 AM

Quote:

Originally Posted by cnile51

You can make solid numbers with a ka. Here's a video of one we did. The tq. is the best part: YouTube - Broadcast Yourself.

Tuning into this thread for this updated build.

the video no worky for me

tunermt · 01-16-2012, 01:33 AM

I'll have new numbers shortly

tunermt · 01-20-2012, 01:21 AM

Just got a revision, still looking forward to the boost solenoid set up though!

tunermt · 03-10-2012, 01:34 AM

Had some friends take my car out to the track for me last weekend, they did a bit of filming to tease me a bit haha. looking forward to sliding my car with everyone down in AZ again one day soon!

Firebird Drift and Drag 3.2.12 West Track by Brewed Motorsports - YouTube

cbcm2435 · 03-10-2012, 01:58 AM

car looks great

SinGarage · 03-10-2012, 03:06 AM

Are you using JE #244514?

robinhudda123 · 03-10-2012, 05:06 AM

Thanks for sharing this post with us .This post is very very important and very curious .In this site we are make and increase the knowledge .Many of the user find the help from this site . Thanks for increasing the information in this site.
ultrasound transducer repair

iveexcaped3 · 03-10-2012, 07:23 AM

WTF????^^^^^ spammer? one post, im not clicking that link hahaha

nice looking car though good job man, for the series 2 did you just use the factory harness or what?

tunermt · 03-11-2012, 01:11 AM

Don't recall the piston part # off the top of my head but they are the 12:1 compression pistons for the de ( translates over to something close to 9:1 maybe a bit higher with the sohc head I am using. )

As for the aem this car actually uses a v1 sorry the pic I posted is indeed a v2 unit. Both the v1 and v2 utilize the stock harness although the v2 must use the aem cas disc (i would recommend using the aem cas in the v1 units as well though) I've done my fair share of bothe v1 and v2 aem ems's and strongly recommend them for any tuning needs

I know alot of people have questions about the aem ems, by almeans everyone feel free to hit me up with questions any time I am always happy to help out!

natejackson · 03-11-2012, 09:33 AM

gettin loose i'm loving it brother!!!

tunermt · 03-11-2012, 07:30 PM

haha fuk i do miss driving that thing! Gotta finish my E30 stat

tunermt · 03-25-2012, 10:57 PM

New E-tune for the S13 KA-t setting up some Drag style antilag

tunermt · 06-10-2012, 09:10 PM

Some old track footage from Fire Bird in AZ

tunermt · 07-10-2012, 04:31 AM

Nice little sun set picture while the car was up in MT

tunermt · 10-15-2013, 06:42 AM

Nice little outing in Tuscon AZ at the P1 circuit.

Wide body S13 drifting on the p1 Kart track

tunermt · 01-12-2021, 12:41 AM

back from the dead, who else still owns a their first car? (still own it, haven't seen or driven it WAY to long)

11-17-2011, 01:11 AM	#1
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	KA24 Engine build, JE pistons, Port and Polish, Full Race turbo manifold Recently put a fresh engine into my S13, the stock KA24e had proven its worth after 6 years of boost at the track and on the streets but with an extra engine floating around why not throw something fresh in the car? Basic engine build details: OEM crank OEM rods (vertical smoothing of all the casting marks) ACL bearings ARP head studs ARP main studs ARP rod bolts Port and Polish (gasket matched head/manifolds) JE forged pistons with (skirt coating) about 9:1 compression OEM valves Will also be doing a new cam and solid rocker arms shortly (hydrolic rocker arms failing above ~5300 rpm) Car is currently using a AEM EMS, ID1000cc injectors and Full Race manifold with a tiny t25 and 38mm tial waste gate. Thanks to the new injectors we will now be able to really push this turbo and see what kind of torque can be made with 20+ psi. An early graph after the first E tune revision, just need to lean things out a bit more and start adding boost. please not the new graph was done in 4th gear VS 3rd gear __________________ Brewed Motors IG @Brewedmotors Last edited by tunermt; 01-12-2021 at 12:43 AM..

12-22-2011, 12:46 PM	#3
babillaracing Zilvia Junkie Join Date: Oct 2009 Location: tampa Age: 45 Posts: 381 Trader Rating: (3) Feedback Score: 3 reviews	nice set up sir __________________ 618 whp tuned by alpha

12-23-2011, 11:39 PM	#4
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	The new year will bring new results with more boost __________________ Brewed Motors IG @Brewedmotors

12-29-2011, 04:26 AM	#5
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	no new results quite yet but here's a non dyno related picture haha __________________ Brewed Motors IG @Brewedmotors

01-13-2012, 01:43 PM	#11
Walperstyle Nissanaholic! Join Date: Nov 2004 Location: Alberta, Red Derp Age: 40 Posts: 1,729 Trader Rating: (0) Feedback Score: 0 reviews	the weakest part is obviously debating on the internet __________________ KA-T ORG-Function over Flush

12-21-2011, 05:23 PM	#2
natejackson Leaky Injector Join Date: Aug 2010 Location: BMT Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	Damn Fran shit baller as usual.

01-09-2012, 12:23 AM	#6
tapdeznutz Nissanaholic! Join Date: May 2011 Location: Long Beach Age: 41 Posts: 1,801 Trader Rating: (50) Feedback Score: 50 reviews	subscribing. wow all that on a single slammer and t25, good to know

01-10-2012, 09:41 PM	#7
240sohc Zilvia Member Join Date: Jan 2010 Location: park bench Posts: 206 Trader Rating: (14) Feedback Score: 14 reviews	im tuning in as well...

01-13-2012, 12:13 PM	#8
tapdeznutz Nissanaholic! Join Date: May 2011 Location: Long Beach Age: 41 Posts: 1,801 Trader Rating: (50) Feedback Score: 50 reviews	i was taking to my buddy last nite very knowlegdeable on sr's etc. he saids that the ka stock rods are shit. what your opinion. i thought i read here that peeps running stock botton end to like well over 300hp. im confused

01-13-2012, 12:30 PM	#9
waxball88 Zilvia FREAK! Join Date: Jun 2009 Location: Gainesville Posts: 1,061 Trader Rating: (9) Feedback Score: 9 reviews	Your friend is an idiot. The pistons are the weak part

01-13-2012, 07:05 PM	#12
natejackson Leaky Injector Join Date: Aug 2010 Location: BMT Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	Everyone calls out the ka, whether or not they kwow it or not. I made over 300rwhp on the stock bottom end @14psi for over 30k w/ a td0620g. Tunermt last setup was a stock bottom end I [email protected] 14psi ran well & long. Fran(tunermt) brew-tuned my new setup @16psi and made 386 rwhp and 341rwtq with shity MT 91 octane. So the ka24 can hang with the sr20 if tuned right and built right!!!

01-13-2012, 07:48 PM	#13
cnile51 Zilvia Member Join Date: Dec 2005 Location: nj Posts: 292 Trader Rating: (3) Feedback Score: 3 reviews	You can make solid numbers with a ka. Here's a video of one we did. The tq. is the best part: YouTube - Broadcast Yourself. Tuning into this thread for this updated build.

01-16-2012, 01:33 AM	#15
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	I'll have new numbers shortly __________________ Brewed Motors IG @Brewedmotors

01-20-2012, 01:21 AM	#16
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Just got a revision, still looking forward to the boost solenoid set up though! __________________ Brewed Motors IG @Brewedmotors

03-10-2012, 01:34 AM	#17
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Had some friends take my car out to the track for me last weekend, they did a bit of filming to tease me a bit haha. looking forward to sliding my car with everyone down in AZ again one day soon! Firebird Drift and Drag 3.2.12 West Track by Brewed Motorsports - YouTube __________________ Brewed Motors IG @Brewedmotors

03-10-2012, 01:58 AM	#18
cbcm2435 Zilvia Junkie Join Date: May 2009 Location: Illinois Age: 30 Posts: 351 Trader Rating: (0) Feedback Score: 0 reviews	car looks great

03-10-2012, 03:06 AM	#19
SinGarage Zilvia Addict Join Date: Sep 2009 Location: 818 SoCal Age: 44 Posts: 674 Trader Rating: (11) Feedback Score: 11 reviews	Are you using JE #244514?

03-10-2012, 05:06 AM	#20
robinhudda123 BANNED Join Date: Mar 2012 Location: delhi Age: 33 Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	Thanks for sharing this post with us .This post is very very important and very curious .In this site we are make and increase the knowledge .Many of the user find the help from this site . Thanks for increasing the information in this site. ultrasound transducer repair

03-10-2012, 07:23 AM	#21
iveexcaped3 Zilvia Addict Join Date: Dec 2010 Location: riverside, ca Posts: 967 Trader Rating: (0) Feedback Score: 0 reviews	WTF????^^^^^ spammer? one post, im not clicking that link hahaha nice looking car though good job man, for the series 2 did you just use the factory harness or what?

03-11-2012, 01:11 AM	#22
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Don't recall the piston part # off the top of my head but they are the 12:1 compression pistons for the de ( translates over to something close to 9:1 maybe a bit higher with the sohc head I am using. ) As for the aem this car actually uses a v1 sorry the pic I posted is indeed a v2 unit. Both the v1 and v2 utilize the stock harness although the v2 must use the aem cas disc (i would recommend using the aem cas in the v1 units as well though) I've done my fair share of bothe v1 and v2 aem ems's and strongly recommend them for any tuning needs I know alot of people have questions about the aem ems, by almeans everyone feel free to hit me up with questions any time I am always happy to help out! __________________ Brewed Motors IG @Brewedmotors

03-11-2012, 09:33 AM	#23
natejackson Leaky Injector Join Date: Aug 2010 Location: BMT Posts: 57 Trader Rating: (0) Feedback Score: 0 reviews	gettin loose i'm loving it brother!!!

03-11-2012, 07:30 PM	#24
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	haha fuk i do miss driving that thing! Gotta finish my E30 stat __________________ Brewed Motors IG @Brewedmotors

03-25-2012, 10:57 PM	#25
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	New E-tune for the S13 KA-t setting up some Drag style antilag __________________ Brewed Motors IG @Brewedmotors

06-10-2012, 09:10 PM	#26
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Some old track footage from Fire Bird in AZ __________________ Brewed Motors IG @Brewedmotors

07-10-2012, 04:31 AM	#27
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Nice little sun set picture while the car was up in MT __________________ Brewed Motors IG @Brewedmotors

10-15-2013, 06:42 AM	#28
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	Nice little outing in Tuscon AZ at the P1 circuit. Wide body S13 drifting on the p1 Kart track __________________ Brewed Motors IG @Brewedmotors

01-12-2021, 12:41 AM	#29
tunermt Zilvia Junkie Join Date: Aug 2008 Location: MT, AZ, Seoul, Bangkok Posts: 335 Trader Rating: (0) Feedback Score: 0 reviews	back from the dead, who else still owns a their first car? (still own it, haven't seen or driven it WAY to long) __________________ Brewed Motors IG @Brewedmotors

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode