KA P/S Pump on SR20 ... SR Tensioner Needed? - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Dorifto Machine · 05-26-2012, 07:50 PM

I'm fully aware that the KA power steering pump can be transferred to a SR bracket with the SR Pulley. However during searching and reading threads on swapping a KA pump to SR20 bracket it has not stated if you also need to swap the belt tensioners.

The reason I ask is because the SR20 I have does not have powersteering, so I bought the bracket and pulley form a zilvia member and he did not send the tensioner with it. I have my KA power steering tensioner but it seems only 1 bolt will line up...

Do I need to source for a SR tensioner or can I make the KA powersteering tensioner work?

Thank you for you time, much help is appreciated!

05-26-2012, 07:50 PM	#1
Dorifto Machine Zilvia Addict Join Date: May 2011 Location: Orlando Fl. Posts: 698 Trader Rating: (17) Feedback Score: 17 reviews	KA P/S Pump on SR20 ... SR Tensioner Needed? I'm fully aware that the KA power steering pump can be transferred to a SR bracket with the SR Pulley. However during searching and reading threads on swapping a KA pump to SR20 bracket it has not stated if you also need to swap the belt tensioners. The reason I ask is because the SR20 I have does not have powersteering, so I bought the bracket and pulley form a zilvia member and he did not send the tensioner with it. I have my KA power steering tensioner but it seems only 1 bolt will line up... Do I need to source for a SR tensioner or can I make the KA powersteering tensioner work? Thank you for you time, much help is appreciated!

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode