brn2slid

Asking/Offering Price: All are OBO
Send text/call: 316-516-1131
Location: Wichita
Name: Philip
Item Description: Some new, some used. Please read everything before asking questions. I am willing to work deals with anyone as long as what you are offering is ridiculous.

Silvia Dual projector headlights PIAA fogs - 230







BNIB Silvia Headlight brackets - Sold



Silvia big letter grille - 65





180sx rear valence - 60




BNIB Competition clutch twin disc for SR20 - 1050




BNIB B&M SR/KA short shifter - 250



BNIB Cometic SR20 head gasket - 90




S13 KSport trac rods - 100



S13 Tein Tension rods - 180



BNIB Wiring Specialties S13 SR - S14 upper and lower harness No ABS for 97-98 - 400



Defi D Gauges:
EGT - 100 missing sensor
Boost - 130



Polished S13 Greddy Intake manifold (REAL) welded in bungs for ID injectors - 500




BNIB 3" inlet Magnaflow muffler (4" outlet) will come with optional hanger for ease of use- 150




Z32 30mm Aluminum calipers w/ brackets for Z track rotors by PBM. Calipers loaded with Hawk HP+ pads and agency conversion lines. - 550





180sx type x signal and marker lights - 150



z32 rear calipers - 80
z32 rear uprights - 80
z32 rear LCA's - 60




And more to come!

lgsr20swap

How much 4 type x signal and markers. Pm asap

Sent from my SCH-I605 using Tapatalk

lucas240sx

Where in ks are you....hopefully not kc
I want the 180sx tail light garnish
I think shipping would be to much

brn2slid

Location is at the very top. Wichita.

lucas240sx

Well hell yea
I go to wichita for drill
Ill be up there in a few weekends
Can you hold or want me to pp u

twin_vector_turbo

Headlight brackets sold to me.

OP send me your PayPal to finalize the transaction.

Boosted_Coupe17

you should text me, more than likely interested in the grille and headlights

Boosted_Coupe17

913.244.4193

brn2slid

Sounds good man, you know this is not for the type x lights, this will be for your factory lights? Just so you know.

Yessir they are. I am going out of town tomorrow morning so I wont be able to send them out until monday afternoon. If you want to wait to pay until then, I understand.

Paypal info: [email protected]

Sounds good, I will contact you in the morning.

lucas240sx

Well dang
Thank you for telling me
Was hopeing it was for the type x

brn2slid

Nope, just for the 180sx/240sx lights

Okinawandrifter87

How much for the rear z32 uprights? Shipped to 95827.

__________________
Driftphreak87

brn2slid

Sent you a message.

Feel free to shoot me offers guys. I am about to get more of my parts gathered up and make another thread with them. Keep an eye out

75bluemage

I need the whole s13 front break conversion how much shipped to 92571


Sent from my iPhone using Tapatalk - now Free

ki_JDM_ds

Bump Phil

I didnt know you had those bumper supports!

__________________

brn2slid

Phone number is listed, please shoot me a message on here or on my phone with offers or questions. All prices are OBO

brn2slid

Feel free to throw offers guys, worst I can say is no. These parts are not needed. Sometime soon I will be uploading more parts and starting a new thread, just haven't had time.

dluevanos01

Do you have the mesh grill that goes with the Type X turn signals?

__________________
IG: @te37_daniel
Build thread

b.series

would you part the rotors and bracket?

brn2slid

I do not. Just what is pictured.

At this point that is the only pieces people want, If you find a buyer for your calipers and/or my calipers yes, I will part. Due to this, the higher the offer the better, too many people want just the rotors/brackets

Cubantunr

still have grill im interested

d_nice

good parts here man

Cubantunr

sent you text whats paypal for silvia grill??

brn2slid

Sent you a message, didn't get a response.


Thank you. Years of parts adding up, just need to unload them for new parts/ new project

Was asked about the Greddy manifold and if I would sell the rail and injectors for it, I will but obviously it will cost more. Seeing as how Greddy has a newer version of this manifold and it uses a different rail, the guy asking was too lazy to search for a rail that will work for this manifold. If you want, I have the greddy rail and ID1000's I would let go as I won't have the motor together for a while and wouldn't mind going to the ID1300's.

acslater9

Great parts man, How much are the z32 rear brake calipers shipped to 33805? Thanks.

brn2slid

May have a local buyer for the rear calipers. I will keep you posted.

rob_240

Im assuming your referring to me being lazy about searching for a rail that will fit this rail, contacted you awhile ago about it. No one makes rails to fit this anymore almost every rail needs to be modified to fit this intake.

seagrasser

rotors are one piece right?

__________________
S14 RB25

brn2slid

If you are the one that kept asking me about everything, yes, I was talking about you. I have found 2 HKS rails, and 3 greddy rails after we spoke so I could try to fit your needs, with your non response apparently what I had to offer was not good enough for you.

Didn't think I needed to add that they are 2 piece as you can tell in the picture, thanks for pointing that out.

However they are pending sale, I just need to get to the post office to get a quote for the guy, been too busy with xmas around the corner.

rob_240

didn't respond back cause i was already purchasing a new fuel rail you mentioned your asking price would be a lot higher including the injectors and fuel rail and if i recall you never gave the price of the intake, rail and injectors