Idle Air Control Valve problem on 95' S14 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

second_chanceS14 · 02-22-2010, 06:19 PM

So for the past few days my car has been bogging out and burning gas quickly and idling high. i have checked the maf and the plugs, basically i cover all the basics. Today after having a friend look at it we found out that the Idle Air Control Valve has noting plugged up to it. it has two outlets where im assuming some lines should plugged up to and also a connector which i assume plugs up to some sensor or something. i got no clue what is supposed to connect to this so any info on what should be connected to it would be great. thanks.

Mashie210 · 03-02-2010, 07:27 PM

do you have a picture of where the part is missing? but if ur talking about the iacv and u have a stock throttle. there should be a bolt on the top u can use a philip to turn that bolt to adjust the idle. the bolt should turn to the tightest. other then that if u get a picture of what is missing we can have a better idea of whats missing that u need to replace.

02-22-2010, 06:19 PM	#1
second_chanceS14 Zilvia Junkie Join Date: Jan 2009 Location: SOCAL Age: 33 Posts: 342 Trader Rating: (19) Feedback Score: 19 reviews	Idle Air Control Valve problem on 95' S14 So for the past few days my car has been bogging out and burning gas quickly and idling high. i have checked the maf and the plugs, basically i cover all the basics. Today after having a friend look at it we found out that the Idle Air Control Valve has noting plugged up to it. it has two outlets where im assuming some lines should plugged up to and also a connector which i assume plugs up to some sensor or something. i got no clue what is supposed to connect to this so any info on what should be connected to it would be great. thanks. __________________ They always go kouki or s15 front end. I say keep it G with the zenki

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-02-2010, 07:27 PM	#2
Mashie210 Leaky Injector Join Date: Sep 2009 Location: Tx Posts: 50 Trader Rating: (0) Feedback Score: 0 reviews	do you have a picture of where the part is missing? but if ur talking about the iacv and u have a stock throttle. there should be a bolt on the top u can use a philip to turn that bolt to adjust the idle. the bolt should turn to the tightest. other then that if u get a picture of what is missing we can have a better idea of whats missing that u need to replace.