Fatboy Garage

Godspeed Project 18G, Car we used is Riley S13 Red Top SR20det , Dyno Done @ Reggie From OSR , Sea Level 4000+



Dyno # 1

Dyno # 2

Dyno # 3

For The Best Price, Please PM or Call US !! (when you call make sure you say you are from Zilvia.net for the best discount!!

We are S13/S14 Specialist, if you cant find what you need check out our website GodSpeed Project - Intercooler, Turbo Kits, Turbo Manifold, Body Kit or give us a call if you have any question!!

We also have other GB on the forum, so please check them out!!!

Ken @ Fatboy Garage Motorsport
2518 Continental Ave
El Monte CA 91733
626-442-3988

2mtx12

im going to be picking this turbo up soon whats max boost and how much power?
and will the stockk inlet and outlet fit on this turbo/ also when is full boost kick in?

Fatboy Garage

Here spec

Bearing system: Journal Bearing
Compressor Wheel Diameter: 50.3 / 68mm
TURBINE Wheel Diameter: 49.2 / 56mm
Turbine TRIM: 57
Turbine flange type flange: T25
Downpipe flange type : 240sx 5 bolt type
Nozzle Area: 8cm²
Cooling type : oil and water cooled.
Horsepower rating: 300-380 hp
BOLT ON TURBO FOR S13 S14 S15 (SR20 MOTOR)
Actuator set at : 14.5 PSI
CFM: 600

Grenade180sx

few quick facts
Install was simple and direct bolt on
The car made just a hair more then advertised( not a bad thing right! 306rwhp so approx 340 the the flywheel

I'll be turning up the boost to 20psi in the coming weeks with a ROM tune and post new dyno sheets.
overall a great product and im thankful to test and help godspeed make a better product.

!Zar!

What size injectors were you running, 740cc?

__________________

Grenade180sx

no sir, 550cc on 100 octane(76 street blaze) im about negative 20 percent on fuel! so i still have ALOT of room in the injectors.

UNITEDMASTER

Im very interested to see WHAT IT DO !!!!

__________________

MR JACKSON.

fcdrifter20

so does this mean your gona start driving again?????

phi_ho1

Lmk who can do Rom tunning? This setup looks good

__________________
Beware for REF tickets

D.Adams

Looks good .

But i got some questions

Will the stock T25 inlet and outlet fit on this turbo?

Will you need new Oil / Water lines ? Or can you use the t25 lines ?

Whats the warranty ?

__________________
“About the time we think we can make ends meet, somebody moves the ends.” ―Herbert Hoover

The build
http://zilvia.net/f/builds-builds-on...u-city-az.html

Owner of NVS Fabrications

Grenade180sx

heres my engine bay.


i ran new oil feed and drain, the line itself is like $15 bucks from any line shop or contact G&J aircraft in ontario california and they will hook you up.

you could run the stock water lines but i just capped mine and ran oil only as the water lines are just meant for people who go from point A to B without letting the car cool down for 1min or 2min.


i believe the stock inlet and outlet will fit, but they come with the adapter plates as well.

Number1

very nice setup whats the name of that color?

Grenade180sx

i call it green, but in some parts of the world its called "really green'

JUST KIDDING

no color code for it really my buddy had some extra green and we added metallic silver to it and bam.

Fatboy Garage

the Warranty is 1 Year limited warranty(installed by ASE Tech) , you blow it we will warranty no Question ask

Thanks

Ken,S

steve shadows

what ems you using? output seems a little off

do you have graph with RPM on the axis to see what the spool is like?

__________________
Like Me on FaceBook !

Grenade180sx

unfortunately for some reason the RPM doesnt pick up on my car. works fine any other car but not mine. full boost with 17 degrees of timing is 4200

steve shadows

grab a power FC for it and bring it down to our place.

We could make 350 whp easy at the same boost- and thats on a DD not a numberjet

__________________
Like Me on FaceBook !

UNITEDMASTER

^^^^ thats the kind of numbers I thought would be there, because evo's do about the same or a lil better with the 18g or TDo6 20g. I was just contemplating fabbing on a 20g for my car(cheap oe quality) . But with this bolt on option why bother,I think this can/will be a hot setup to put you in the 350 zone without spending tons of $$$

__________________

MR JACKSON.

Grenade180sx

ill work on grabbing a PFC soon steve, I drove the car this past thursday at Adams, and i must say its a great setup. a little laggier then a S15 but once your in boost it pulls non stop and hard!

great turbo for the cost and quality is great, glad to see godspeed stepping up there quality game and making a better product at still a great price.

OLDSCHOOLRICER

How will this turbo do on a ka24de? Very interested in this turbo

Grenade180sx

id say its be really fun, due to the KA's larger displacement it should spool well and will carry all the way up on teh small powerband a ka has( roughly around 55-5800rpm then the run outta breath) LOL unless ya got cams in it.

doug200t

Grab yourself a nistune board and ill give you some maps or i can reflash roms

__________________

http://www.iwannagofast.net [url]

OLDSCHOOLRICER

Thanks lot riley.

Grenade180sx

no problem sir.

2mtx12

are u using stock cams or???

Grenade180sx

yes sir stock internals.. if i were to do cams id do 256's

Exclusive Nights

wow... impressive and for a good price..

Z33dori

what where the numbers in 4th gear? or did u only do 3rd gear pulls? if so why?

why so much timing?

__________________

s14unimog

How's that actuator doing? Have you watched it on the dyno? I'm running a FP 20G on my SR and I had a sluggish boost curve b/c of the original actuator provided; looks like that one. With an HKS actuator, its less than a laggy turbo, even at 1 bar.

__________________
Fu*king ginger bread man stole my wallet...

SHIFTlock_slide to side

d3m3rs0n: if i have a baby im naming it Brandons Fault Emerson

Z33dori

no answer

mslgth

__________________