RB25 S13 start issues. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

I.<3.MY.SILVIA · 04-06-2012, 08:24 PM

1992 Nissan 240SX
RB25DET S2
isis intake manifold
WS harness
walbro fuel pump
everything else stock.

When the engine is cold it will fire up, but wont idle unless i play with the gas pedal. After it warms up it will idle fine.

The car wont start after the car has been running for 20 minutes. Let it cool off for a couple of minutes and it will fire right up again. While playing with the gas pedal till it idles on it's own.

EGI relay has been bypassed.

I've replaced it with a new relay and fuel pump won't come on. When EGI relay has been bypassed fuel pump comes on.

I'm guessing that the ECU isn't sending the signal back to the EGI relay or could be a wiring problem.

Still don't know if thats causing my start up issues. I'm getting 43 psi with vacum off on my FPR and sits at around 30 some with vacum connected.

and also my walbro fuel pump doesn't sound like its humming normal. fuel pressure drop and goes back up sometimes.

guessing even my fuel pump is going out.

Just want the car to start up normal like any other car.

any help would be appreciated thanks.

Sileighty_85 · 04-06-2012, 11:00 PM

Coolant Temp Sensor

I.<3.MY.SILVIA · 04-07-2012, 12:10 AM

Quote:

Originally Posted by Sileighty_85

Coolant Temp Sensor

I bought one from autozone and its color grey. Would color matter?
P/N 22630-44B20 was cross references to what autozone had.
and still doing the same thing.

Sileighty_85 · 04-07-2012, 12:12 AM

Not sure, Check ECU for codes

I.<3.MY.SILVIA · 04-07-2012, 12:15 AM

Quote:

Originally Posted by Sileighty_85

Not sure, Check ECU for codes

my ecu doesn't have the diagnostic screw and led

I.<3.MY.SILVIA · 04-07-2012, 03:00 PM

Anyone know how I can check for ECU Codes on my 1992 240sx RB25?
ECU doesn't have the led light and screw. I've read you can use a paper clip jumper, to let the CEL throw codes. Not sure if that works for 1992 240sx.

KendallH · 04-07-2012, 03:27 PM

As Sileighty said, definite indication of the CTS. Start there.

I.<3.MY.SILVIA · 04-07-2012, 11:44 PM

Quote:

Originally Posted by KendallH

As Sileighty said, definite indication of the CTS. Start there.

Replaced my CTS using this P/N 22630-44B20. Got the CTS from autozone though.

Anyways I've already put in an order for a OEM CTS, Walbro fuel pump, & NGK spark plugs with FRSPORT.

Might be a fuel pump issue. My FPR reading goes up and drops down.

04-06-2012, 08:24 PM	#1
I.<3.MY.SILVIA Join Date: Nov 2011 Location: TN Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	RB25 S13 start issues. 1992 Nissan 240SX RB25DET S2 isis intake manifold WS harness walbro fuel pump everything else stock. When the engine is cold it will fire up, but wont idle unless i play with the gas pedal. After it warms up it will idle fine. The car wont start after the car has been running for 20 minutes. Let it cool off for a couple of minutes and it will fire right up again. While playing with the gas pedal till it idles on it's own. EGI relay has been bypassed. I've replaced it with a new relay and fuel pump won't come on. When EGI relay has been bypassed fuel pump comes on. I'm guessing that the ECU isn't sending the signal back to the EGI relay or could be a wiring problem. Still don't know if thats causing my start up issues. I'm getting 43 psi with vacum off on my FPR and sits at around 30 some with vacum connected. and also my walbro fuel pump doesn't sound like its humming normal. fuel pressure drop and goes back up sometimes. guessing even my fuel pump is going out. Just want the car to start up normal like any other car. any help would be appreciated thanks.

04-06-2012, 11:00 PM	#2
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Coolant Temp Sensor __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

04-07-2012, 12:12 AM	#4
Sileighty_85 Post Whore! Join Date: Dec 2006 Location: Misawa, Japan Posts: 6,815 Trader Rating: (8) Feedback Score: 8 reviews	Not sure, Check ECU for codes __________________ 後輪駆動車１番 1989 Built SR GT2871R -363whp 1998 S14 W/RB25- 250ish (For Now) 1986 SR86 - 200ish 1990 R32 GTR - 320hp Don't Buy Engines from JDM-Online http://zilvia.net/f/businesses/207457-jdm-online.html Don't Buy XS-Power or SSAC Shit

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-07-2012, 03:00 PM	#6
I.<3.MY.SILVIA Join Date: Nov 2011 Location: TN Posts: 22 Trader Rating: (0) Feedback Score: 0 reviews	Anyone know how I can check for ECU Codes on my 1992 240sx RB25? ECU doesn't have the led light and screw. I've read you can use a paper clip jumper, to let the CEL throw codes. Not sure if that works for 1992 240sx.

04-07-2012, 03:27 PM	#7
KendallH Zilvia Addict Join Date: Jan 2011 Location: Clearwater, FL Level: Master Troll Age: 29 Posts: 871 Trader Rating: (3) Feedback Score: 3 reviews	As Sileighty said, definite indication of the CTS. Start there.