Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 05-21-2013, 10:37 AM   #1
foreverdeath
Zilvia Junkie
 
foreverdeath's Avatar
 
Join Date: Sep 2012
Location: va beach
Age: 28
Posts: 318
Trader Rating: (3)
foreverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the rough
Feedback Score: 3 reviews
shakly idle, low power ka24de

ok guys so im stumped on my s13. every since i got it ive had an idle issue right now is the best i have ever got it. right now when you left of the gas it hang around 1200rpm and may climb upto 1400rpm then a a few seconds later it go down to the normal 750. ive been hunting a vac leak for ever and timing is on spot. now i dont think its a vac leak after i have latly be testing it by pressuizng the manifold and liseaning for leaks. today i evening tried cleaning the maf which didnt really help. one thin that confuses me is that if i on plug the maf the idle issue goes away. specs are as is: rebuilt KA24de (2600miles, 248/232 cams, p2r thermal intake gasket, egr/pair/emissions delete, no powersteering, obx header, and no name clod air intake. i have been looking at also with nissan datascan and im just out of ideas. would attach a NDS datalog but i cant find the file outside of NDS. i have no clue where the low power thing had come from but it kinda random and seems to cut power around 3-5k rpm almost like its pulling a shit ton of timing.

Last edited by foreverdeath; 05-21-2013 at 01:34 PM..
foreverdeath is offline   Reply With Quote
Sponsored Links
Old 05-21-2013, 08:12 PM   #2
TailHappy13
 
Join Date: Nov 2011
Location: California
Posts: 15
Trader Rating: (0)
TailHappy13 is an unknown quantity at this point
Feedback Score: 0 reviews
Have you tried cleaning out your idle air valves? You may also try a known good MAF. In my experience cleaning a MAF rarely helps...
TailHappy13 is offline   Reply With Quote
Old 05-21-2013, 10:02 PM   #3
foreverdeath
Zilvia Junkie
 
foreverdeath's Avatar
 
Join Date: Sep 2012
Location: va beach
Age: 28
Posts: 318
Trader Rating: (3)
foreverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the rough
Feedback Score: 3 reviews
Idle air valve was cleaned during rebuiled. When i lookd at the idle at via consult its idleing at like 12 degrees of timing while idel air control vavle is shut. And tonight i looked at it again with the light and blower on with with each item i turned on it pulled less timing from idle with tells me its getting to much air somehow. By the way the idle air screw is almost all the way in.
foreverdeath is offline   Reply With Quote
Old 05-22-2013, 01:02 PM   #4
foreverdeath
Zilvia Junkie
 
foreverdeath's Avatar
 
Join Date: Sep 2012
Location: va beach
Age: 28
Posts: 318
Trader Rating: (3)
foreverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the rough
Feedback Score: 3 reviews
i found maf a picknpull today dirty outside but hella clean inside run a little better i guess, it reads slight higer then my old maf did. so im back to step one trying to find a vac leak leak any help guys?

Last edited by foreverdeath; 05-22-2013 at 04:18 PM..
foreverdeath is offline   Reply With Quote
Old 05-27-2013, 08:20 PM   #5
i cant drift worth shit
 
Join Date: May 2013
Location: ontario
Posts: 39
Trader Rating: (0)
i cant drift worth shit is an unknown quantity at this point
Feedback Score: 0 reviews
Missfire or vacuum leak.
i cant drift worth shit is offline   Reply With Quote
Old 05-27-2013, 08:22 PM   #6
foreverdeath
Zilvia Junkie
 
foreverdeath's Avatar
 
Join Date: Sep 2012
Location: va beach
Age: 28
Posts: 318
Trader Rating: (3)
foreverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the roughforeverdeath is a jewel in the rough
Feedback Score: 3 reviews
figured it out already AUTOtragic ECU -.-. its shakey casuit pull timing to compansate for the lack of idle resistance (torque convertor), also runing 232/248 cams, poly mounts doesnt help...
foreverdeath is offline   Reply With Quote
Old 05-27-2013, 08:52 PM   #7
i cant drift worth shit
 
Join Date: May 2013
Location: ontario
Posts: 39
Trader Rating: (0)
i cant drift worth shit is an unknown quantity at this point
Feedback Score: 0 reviews
Nice. Glad you got it figured out.
i cant drift worth shit is offline   Reply With Quote
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 04:05 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™