Ka24de no crank - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Eramo323 · 09-06-2012, 03:50 PM

1991-1994 240sx Starter not turning engine over tutorial : 240SX Technical Forum

JaiDaJoker · 09-07-2012, 07:56 AM

I check voltage and im only getting 2 -4 volts to the starter but im getting 12.75 at battery

Eramo323 · 09-07-2012, 10:41 AM

probably a bad connection to your interlock switch ?

JaiDaJoker · 09-07-2012, 10:41 AM

found a loose connection form when it was spliced for 5spd swap still no luck but symptoms have changed[IMG]

[/IMG]

Eramo323 · 09-07-2012, 10:45 AM

Quote:

Originally Posted by JaiDaJoker

found a loose connection form when it was spliced for 5spd swap still no luck but symptoms have changed[IMG]

[/IMG]

getting 12V to the switch and starter now ?

JaiDaJoker · 09-07-2012, 10:46 AM

sorry for pis being so big, but yea i found the loose wire where the blue connectors are at now and when the 5 spd swap was first done that being connected as the only ay for car to start , however still no crank[IMG]

[/IMG]

JaiDaJoker · 09-07-2012, 10:47 AM

yep getting over 12 v to switch and starter now

JaiDaJoker · 09-07-2012, 10:48 AM

but now in car radio doesnt come on, nor room lights, but clock is on, so im assuming blown fuse somewhere now?

Eramo323 · 09-07-2012, 10:49 AM

Quote:

Originally Posted by JaiDaJoker

sorry for pis being so big, but yea i found the loose wire where the blue connectors are at now and when the 5 spd swap was first done that being connected as the only ay for car to start , however still no crank[IMG]

[/IMG]

correct me if I'm wrong but shouldn't those wires be hooked to each other -.-
are you getting 12V to the interlock switch ans the starter now ?
yep check the fuses !

JaiDaJoker · 09-07-2012, 10:50 AM

Alternator connected right with grounds and cable?[IMG]

[/IMG]

JaiDaJoker · 09-07-2012, 10:52 AM

you mean to connect the black cables and white cables together?

JaiDaJoker · 09-07-2012, 10:56 AM

and in regards to the interlock switch , I was under the belief that sinced these two wires were connected to eachother the clutch wouldnt need to be depressed to start car, thus eliminating the interlock switch?

Eramo323 · 09-07-2012, 10:57 AM

Quote:

Originally Posted by JaiDaJoker

you mean to connect the black cables and white cables together?

JaiDaJoker · 09-07-2012, 11:03 AM

ok gimme 5 mins to check

JaiDaJoker · 09-07-2012, 11:25 AM

the plug referred to in the pic has 2 black cables, the one that was disconnected has one white one black, but yea the one that need to be jumped to itself is jumped to itself. Inside the car with no key in the igniton door lamp tuns on and map lights, however when i move to acc they start to dim and the door chime turns into a door click and when i turn to on position it clicks or makes no noise whatsoever

Eramo323 · 09-07-2012, 11:55 AM

Quote:

Originally Posted by JaiDaJoker

the plug referred to in the pic has 2 black cables, the one that was disconnected has one white one black, but yea the one that need to be jumped to itself is jumped to itself. Inside the car with no key in the igniton door lamp tuns on and map lights, however when i move to acc they start to dim and the door chime turns into a door click and when i turn to on position it clicks or makes no noise whatsoever

is the battery charged ?

JaiDaJoker · 09-07-2012, 12:06 PM

yep it has 12.75 volts

JaiDaJoker · 09-07-2012, 12:14 PM

just rried to crank car and there was one click and my clock restarted

Eramo323 · 09-07-2012, 12:20 PM

Quote:

Originally Posted by JaiDaJoker

just rried to crank car and there was one click and my clock restarted

try jump starting it ...

JaiDaJoker · 09-07-2012, 12:38 PM

still no luck :/

JDMRIDDAZ · 09-07-2012, 12:40 PM

i got a shop in boca
i specialize in electrical issues on 240sx
i also make house calls..
i definitely can fix ur issue
lmk

Eramo323 · 09-07-2012, 12:42 PM

^^^ electrical issue

JaiDaJoker · 09-07-2012, 01:19 PM

i have a feeling its a ground somewhere but i checked all of the ones i can think of, does anybody know of all the grounds in the engine bay?

JaiDaJoker · 09-07-2012, 01:20 PM

JDMRIDDAZ hmu 5614524216

JaiDaJoker · 09-11-2012, 08:57 PM

If and when JDMRiddaz fies my problem ill be sure to put up the solution to help other fellow zilvians

JaiDaJoker · 09-13-2012, 09:08 PM

JDMRiddaz= Electrical god, i reccomend anybody in the south florida area to hit him up if they have issues

Linux2501 · 09-29-2012, 04:04 PM

Quote:

Originally Posted by Eramo323

correct me if I'm wrong but shouldn't those wires be hooked to each other -.-
are you getting 12V to the interlock switch ans the starter now ?
yep check the fuses !

Im having the same problem any luck and what wires did you get crossed and did your relays kick on and off? mine do not clock (efi and the ones on the right side of the car.)

JaiDaJoker · 10-18-2012, 03:10 PM

Quote:

Originally Posted by Linux2501

Im having the same problem any luck and what wires did you get crossed and did your relays kick on and off? mine do not clock (efi and the ones on the right side of the car.)

Ask JDMRiddaz, he came out to the house and solved my problem.

Linux2501 · 10-18-2012, 03:17 PM

I got it I am tossing the auto and doing a 5speed swap and I proceeded with the wiring the way you would a 5speed swap

09-07-2012, 10:41 AM	#34
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	found a loose connection form when it was spliced for 5spd swap still no luck but symptoms have changed[IMG][/IMG]

09-07-2012, 10:46 AM	#36
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	sorry for pis being so big, but yea i found the loose wire where the blue connectors are at now and when the 5 spd swap was first done that being connected as the only ay for car to start , however still no crank[IMG][/IMG]

09-07-2012, 10:50 AM	#40
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	Alternator connected right with grounds and cable?[IMG][/IMG]

09-07-2012, 12:40 PM	#51
JDMRIDDAZ Zilvia Junkie Join Date: Sep 2007 Location: ｆォリダ Age: 44 Posts: 440 Trader Rating: (3) Feedback Score: 3 reviews	i got a shop in boca i specialize in electrical issues on 240sx i also make house calls.. i definitely can fix ur issue lmk __________________ シチサｎ w/ka20det:in progress シチサｎw/sr20det:stolen

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-06-2012, 03:50 PM	#31
Eramo323 Zilvia Addict Join Date: Jun 2010 Location: NORTH EAST LOS ANGELES Age: 32 Posts: 764 Trader Rating: (22) Feedback Score: 22 reviews	1991-1994 240sx Starter not turning engine over tutorial : 240SX Technical Forum

09-07-2012, 07:56 AM	#32
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	I check voltage and im only getting 2 -4 volts to the starter but im getting 12.75 at battery

09-07-2012, 10:47 AM	#37
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	yep getting over 12 v to switch and starter now

09-07-2012, 10:48 AM	#38
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	but now in car radio doesnt come on, nor room lights, but clock is on, so im assuming blown fuse somewhere now?

09-07-2012, 10:52 AM	#41
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	you mean to connect the black cables and white cables together?

09-07-2012, 10:56 AM	#42
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	and in regards to the interlock switch , I was under the belief that sinced these two wires were connected to eachother the clutch wouldnt need to be depressed to start car, thus eliminating the interlock switch?

09-07-2012, 11:03 AM	#44
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	ok gimme 5 mins to check

09-07-2012, 11:25 AM	#45
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	the plug referred to in the pic has 2 black cables, the one that was disconnected has one white one black, but yea the one that need to be jumped to itself is jumped to itself. Inside the car with no key in the igniton door lamp tuns on and map lights, however when i move to acc they start to dim and the door chime turns into a door click and when i turn to on position it clicks or makes no noise whatsoever

09-07-2012, 12:06 PM	#47
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	yep it has 12.75 volts

09-07-2012, 12:14 PM	#48
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	just rried to crank car and there was one click and my clock restarted

09-07-2012, 12:38 PM	#50
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	still no luck :/

09-07-2012, 12:42 PM	#52
Eramo323 Zilvia Addict Join Date: Jun 2010 Location: NORTH EAST LOS ANGELES Age: 32 Posts: 764 Trader Rating: (22) Feedback Score: 22 reviews	^^^ electrical issue

09-07-2012, 01:19 PM	#53
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	i have a feeling its a ground somewhere but i checked all of the ones i can think of, does anybody know of all the grounds in the engine bay?

09-07-2012, 01:20 PM	#54
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	JDMRIDDAZ hmu 5614524216

09-11-2012, 08:57 PM	#55
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	If and when JDMRiddaz fies my problem ill be sure to put up the solution to help other fellow zilvians

09-13-2012, 09:08 PM	#56
JaiDaJoker Join Date: Sep 2011 Location: Wellington, FL Posts: 47 Trader Rating: (0) Feedback Score: 0 reviews	JDMRiddaz= Electrical god, i reccomend anybody in the south florida area to hit him up if they have issues

10-18-2012, 03:17 PM	#59
Linux2501 Zilvia Junkie Join Date: May 2012 Location: Muscle Shoals AL Age: 30 Posts: 307 Trader Rating: (1) Feedback Score: 1 reviews	I got it I am tossing the auto and doing a 5speed swap and I proceeded with the wiring the way you would a 5speed swap