Need a lucky S12 volunteer for parts development - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

[email protected] · 09-30-2013, 07:14 PM

I need someone in the GTA that wants to help test fit some suspension/brake upgrades for me...

Best way to reach me is gulyas [at] live [dot] ca or text 4i6 688 8o98

REWARD:
option 1) BIG discount on any or all of the products
option 2) get a free set of cromoly 60mm extended studs to pimp zer auto
option 3) get a free roll of toilet paper

Anyone in quebec is welcome to reach me too if you come down this way frequently...

Alternately, I could also use stock front spindles and arms for mockup, that would help me too

[email protected] · 10-05-2013, 02:12 PM

Bump... look here for the kind of things to expect

http://zilvia.net/f/z-chassis/502597...ml#post5435986

oldschoolsilvia · 10-05-2013, 08:35 PM

Not many people on Zilvia with an S12, check over on Club-S12 - 10th Aniversary - Club-S12.org - Index if you haven't already!

[email protected] · 10-06-2013, 12:22 AM

I have been a member there forever too.... just thought I'd reach out to anyone else who may frequent zilvia, and bonus if they lived close by

SidewaysS13ka · 10-14-2013, 10:34 PM

it would be cool to run you set up on my s13..lets see if it fits or mocks up, if theres little or minimal mods i can do them at work, let me know it shouldnt be too different

[email protected] · 10-14-2013, 10:41 PM

The front spindle on the s12/r31/z31 are a solid strut tube welded into the spindle, with the tierod and balljoint attached on a separate piece... if you are more familiar with corollas, it's like the ae86 front

Of course some of my parts can be made to work, as with anything, but much of what I made is specific to that type of setup, not the combined everything-spindle or the s13/s14

Now if I was attempting to adapt the bbk for s13/s14 use, it would make more sense to start from scratch, with a new hat, and I could potentially even reuse the same bracket then

SidewaysS13ka · 10-14-2013, 10:51 PM

well when you decide to attempt the bbk for an s13/14 let me know because ill be down. just saying its a business option

[email protected] · 10-14-2013, 11:14 PM

It's on the list too.. just starting with the guys that need the upgrades more

09-30-2013, 07:14 PM	#1
[email protected] Leaky Injector Join Date: Sep 2012 Location: Toronto Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	Need a lucky S12 volunteer for parts development I need someone in the GTA that wants to help test fit some suspension/brake upgrades for me... Best way to reach me is gulyas [at] live [dot] ca or text 4i6 688 8o98 REWARD: option 1) BIG discount on any or all of the products option 2) get a free set of cromoly 60mm extended studs to pimp zer auto option 3) get a free roll of toilet paper Anyone in quebec is welcome to reach me too if you come down this way frequently... Alternately, I could also use stock front spindles and arms for mockup, that would help me too

10-05-2013, 08:35 PM	#3
oldschoolsilvia Zilvia Member Join Date: Feb 2007 Location: Richardson, TX Age: 32 Posts: 237 Trader Rating: (3) Feedback Score: 3 reviews	Not many people on Zilvia with an S12, check over on Club-S12 - 10th Aniversary - Club-S12.org - Index if you haven't already! Last edited by oldschoolsilvia; 10-05-2013 at 08:35 PM.. Reason: That link wouldn't work as club-s12.org, I think its working now though!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-05-2013, 02:12 PM	#2
[email protected] Leaky Injector Join Date: Sep 2012 Location: Toronto Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	Bump... look here for the kind of things to expect http://zilvia.net/f/z-chassis/502597...ml#post5435986

10-06-2013, 12:22 AM	#4
[email protected] Leaky Injector Join Date: Sep 2012 Location: Toronto Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	I have been a member there forever too.... just thought I'd reach out to anyone else who may frequent zilvia, and bonus if they lived close by

10-14-2013, 10:34 PM	#5
SidewaysS13ka Zilvia Junkie Join Date: Feb 2011 Location: Northeastern,PA Age: 31 Posts: 334 Trader Rating: (12) Feedback Score: 12 reviews	it would be cool to run you set up on my s13..lets see if it fits or mocks up, if theres little or minimal mods i can do them at work, let me know it shouldnt be too different

10-14-2013, 10:41 PM	#6
[email protected] Leaky Injector Join Date: Sep 2012 Location: Toronto Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	The front spindle on the s12/r31/z31 are a solid strut tube welded into the spindle, with the tierod and balljoint attached on a separate piece... if you are more familiar with corollas, it's like the ae86 front Of course some of my parts can be made to work, as with anything, but much of what I made is specific to that type of setup, not the combined everything-spindle or the s13/s14 Now if I was attempting to adapt the bbk for s13/s14 use, it would make more sense to start from scratch, with a new hat, and I could potentially even reuse the same bracket then

10-14-2013, 10:51 PM	#7
SidewaysS13ka Zilvia Junkie Join Date: Feb 2011 Location: Northeastern,PA Age: 31 Posts: 334 Trader Rating: (12) Feedback Score: 12 reviews	well when you decide to attempt the bbk for an s13/14 let me know because ill be down. just saying its a business option

10-14-2013, 11:14 PM	#8
[email protected] Leaky Injector Join Date: Sep 2012 Location: Toronto Posts: 126 Trader Rating: (0) Feedback Score: 0 reviews	It's on the list too.. just starting with the guys that need the upgrades more