Trying to take out injectors. - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

twelvea · 06-27-2005, 07:52 AM

Ok im trying to take out my injectors(I searched and nothing), HOW THE HELL IS THIS DONE, killme I cant get them out, I broke some of the plastic off so I stoped, Im trying to take them out to put some 370s in, also if I put in 370's with out anything else will in not run right??

skatanic28 · 06-27-2005, 07:58 AM

you need some sort of fuel control to use those injectors. (safc, ecu tune, e-manage)

for the injectors.....i ended up threading the cap screws in about halfway and using the indents in the side of the injector top to pry them out. nothing broke that way and it only took like 5 minutes.

twelvea · 06-27-2005, 08:25 AM

hmm wa u mean take them out with the caps on??? how?

96twofourty · 06-27-2005, 08:50 AM

you take off the caps (metal pieces held on with two screws) then you twist and pull the injectors straight up

skatanic28 · 06-28-2005, 12:13 AM

Quote:

Originally Posted by twelvea

hmm wa u mean take them out with the caps on??? how?

i took the caps off, then threaded the screws back in about half way. then you can get some leverage with a small screwdriver and lift em out.

06-27-2005, 07:52 AM	#1
twelvea Zilvia Member Join Date: Mar 2005 Location: NC Posts: 164 Trader Rating: (0) Feedback Score: 0 reviews	Trying to take out injectors. Ok im trying to take out my injectors(I searched and nothing), HOW THE HELL IS THIS DONE, killme I cant get them out, I broke some of the plastic off so I stoped, Im trying to take them out to put some 370s in, also if I put in 370's with out anything else will in not run right??

06-27-2005, 08:50 AM	#4
96twofourty Zilvia Junkie Join Date: Oct 2003 Location: nor*cal Posts: 354 Trader Rating: (0) Feedback Score: 0 reviews	you take off the caps (metal pieces held on with two screws) then you twist and pull the injectors straight up __________________ Buy my stuff: http://www.zilvia.net/f/announcement.php?f=10

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

06-27-2005, 07:58 AM	#2
skatanic28 Zilvia Junkie Join Date: Oct 2002 Location: ny Age: 37 Posts: 443 Trader Rating: (0) Feedback Score: 0 reviews	you need some sort of fuel control to use those injectors. (safc, ecu tune, e-manage) for the injectors.....i ended up threading the cap screws in about halfway and using the indents in the side of the injector top to pry them out. nothing broke that way and it only took like 5 minutes.

06-27-2005, 08:25 AM	#3
twelvea Zilvia Member Join Date: Mar 2005 Location: NC Posts: 164 Trader Rating: (0) Feedback Score: 0 reviews	hmm wa u mean take them out with the caps on??? how?