Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-08-2011, 05:54 PM   #1
mikeroy420
Zilvia Junkie
 
mikeroy420's Avatar
 
Join Date: Jan 2003
Location: Nova Scotia, Canada
Age: 41
Posts: 479
Trader Rating: (4)
mikeroy420 is making his/her stupidity well-knownmikeroy420 is making his/her stupidity well-knownmikeroy420 is making his/her stupidity well-knownmikeroy420 is making his/her stupidity well-known
Feedback Score: 4 reviews
Viper 5901 into s14. Help needed.

I am trying to install my Viper 5901 into my 97 240sx. I am still unsure about a few of the connections, even after searching1995-97 Nissan 240 SX Alarm, Remote Starter, Keyless Entry Wiring Information, Stealth Car Alarm Install - 95-98 Nissan 240SX, http://zilvia.net/f/chat/142355-inst...1xv-alarm.html. Any help would be appreciated.

Here are the connections I already know:

H1 Main Harness

H1/1 Red/White (-) 200mA Aux/Trunk output --> to trunk selonoid relay
H1/2 Red (+) 12V constant input--> to 12V white in ING harness
H1/3 Brown (+) Siren Output--> to sirens
H1/4 White/Brown Parking Light Isolation wire--> not used
H1/5 Black (-) Chassis Ground--> to ground
H1/6 Violet (+) Door Trigger Input--> not used
H1/7 Blue (-) Trunk Pin/Instant Trigger Input--> to tilt sensor, backup battery, and trunk light
H1/8 Green (-) Door Trigger Input--> to red/white drivers side kick panel
H1/9 Black/White (-) 200mA Dome Light Supervision output--> not used
H1/10 White/Blue (-) Remote Start/Turbo Timer Activation--> not used, have an Apexi turbo timer (using diode)
H1/11 White Parking Light output--> to red/blue ING harness
H1/12 Orange (-) 500mA Ground when armed output --> to 507M tilt sensor and for fuel cut trigger

The following harnesses have connections that I am unsure about.

H2 Harness

H2/1 Light Green/black (-) 200mA alarm disarm output --> to green/yellow, anti-theft
H2/2 Orange/Black (-) 200mA Aux 4 output --> not used???
H2/3 Green/White (-) 200mA alarm arm output --> light green/red, anti-theft
H2/4 Violet/black (-) 200mA Aux 2 output --> not used???
H2/5 White/Black (-) 200mA Aux 3 output --> not used???
H2/6 White/violet (-) 200mA Aux 1 output --> not used???
H2/7 Grey/black (-) Diesel wait to start input --> not used???
H2/8 Brown/black (-) 200mA Horn Honk output-->to yellow/green anti-theft module
H2/9 Violet/White Tachometer input --> to yellow/red, ECM passenger side kick panel
H2/10 Dark blue (-) 200mA status output -->not used???
H2/11 pink/white (-) 200mA flex relay control output -->???
H2/12 orange (-) 200mA accessory output --> ???
H2/13 purple (-) 200mA starter output --> ???
H2/14 pink (-) 200mA ignition 1 output --> ???
H2/15 grey (-) Hood pin input --> to yellow/black, anti-theft module
H2/16 blue/white (-) 200mA 2nd status/rear defogger output --> ????
H2/17 brown (+) brake shutdown input --> to red/green , brake switch
H2/18 black/white (-) neutral safety input --> ???????


H3 Remote Start Harness

H3/1 Pink (+) Ignition 1 input/output --> to white, ignition harness car side
H3/2 Red/White (87) Flex Relay input (30A Fused) --> not used
H3/3 Orange (+) Accessory output --> not used???
H3/4 Violet (+) Starter output car side --> to black/yellow, ignition harness car side
H3/5 Green (+) Starter input key side --> to black/yellow, ignition harness key side
H3/6 Red Ignition 1 input (30A fused) --> to white, ignition harness key side
H3/7 Pink/White (30) Flex Relay output --> ?????
H3/8 Pink/black (87a) Flex relay input --> ?????
H3/9 Red/black accessory/starter relay input (30A fused) --> ?????

If someone could help fill in the question marks and correct any mistakes that would be greatly appreciated.

Thanks

Last edited by mikeroy420; 05-09-2011 at 06:33 PM..
mikeroy420 is offline   Reply With Quote
Sponsored Links
 

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:14 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™