Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 08-01-2013, 10:19 PM   #1
203692
 
Join Date: Aug 2013
Location: Marysville, WA
Posts: 17
Trader Rating: (0)
203692 is an unknown quantity at this point
Feedback Score: 0 reviews
no spark might be cas or ecu. Please help

so i am finishing up my sr20det redtop swap into my 91 s13 hatch. My buddy and i did everything by the book and took our time.

We crank it for the first start and jst turns over but nothing further from there.There is no spark. We have traced the issue and ran blink codes and traced it back to being either the CAM SENSOR or the ECU.

I did some research before coming here and noticed that the cam sensor should have between 0.1 and 5 volts coming through it. I tested it. The first 2 prones showed no reading on my voltage reader when tested next to each other. When i tested other prones and combined others with the first 2 i recieved random readings like 5.32, 7.21, 12.25.

IDK if this means my ECU is sending bad signals therefore it's fried, or my sensor is bad.

Someone Please Help. Thanks
203692 is offline   Reply With Quote
Sponsored Links
Old 08-02-2013, 06:23 AM   #2
Mikester
Nissanaholic!
 
Mikester's Avatar
 
Join Date: Jun 2007
Location: Kathleen, GA
Age: 50
Posts: 1,938
Trader Rating: (0)
Mikester is a well-known jackass
Feedback Score: 0 reviews
Make sure your harness and coilpack harness etc are properly grounded.
__________________
Mikester is offline   Reply With Quote
Old 08-02-2013, 01:30 PM   #3
203692
 
Join Date: Aug 2013
Location: Marysville, WA
Posts: 17
Trader Rating: (0)
203692 is an unknown quantity at this point
Feedback Score: 0 reviews
what do u mean by ground the wiring harness? like make sure the ecu is grounded?
203692 is offline   Reply With Quote
Old 08-02-2013, 01:36 PM   #4
203692
 
Join Date: Aug 2013
Location: Marysville, WA
Posts: 17
Trader Rating: (0)
203692 is an unknown quantity at this point
Feedback Score: 0 reviews
nvm i misread that. i'll make sure the coilpack and everything is grounded and get back to u thanks
203692 is offline   Reply With Quote
Old 08-02-2013, 02:48 PM   #5
203692
 
Join Date: Aug 2013
Location: Marysville, WA
Posts: 17
Trader Rating: (0)
203692 is an unknown quantity at this point
Feedback Score: 0 reviews
so i checked all the grounds and made sure they were on well and still nothing. Any other suggestions?

The ECU has a solid red light on when the power is on if that helps any.
203692 is offline   Reply With Quote
Reply

Bookmarks

Tags
cam angle sensor, ecu, no spark, sr20 redtop, won't start


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:08 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™