**WSRD Brake Line Relocation Kits!** - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

PoorMans180SX · 07-28-2015, 04:22 PM

Our brake line relocation kits route under the factory crossmember, cleaning up the bay and making room for turbo setups. They're compatible with S13/Z31/Z32/Pathfinder master cylinders and are made in the USA! Teflon braided stainless line coated in a protective teflon outer shell means these are built to last! (Pictured with V1 High pressure power steering line).

Comes with all the fittings to connect your master cylinder to the caliper and rear brake line(s).

http://www.whalentuned.com/nissan-240sx.html

Zilvia price: $199 shipped! PM me to order!

*TheRealSy90* · 07-28-2015, 04:56 PM

Do you offer the lines from the front and rear calipers also? Or can you recommend a good brand for those of similar quality.

PoorMans180SX · 07-28-2015, 05:14 PM

Quote:

Originally Posted by TheRealSy90

Do you offer the lines from the front and rear calipers also? Or can you recommend a good brand for those of similar quality.

We don't currently offer the caliper lines, but we recommend and install Goodridge lines here at the shop on a variety of vehicles. We can get them both to you in the same box.

K_style · 07-29-2015, 06:14 AM

Nice !!!
Is it made to order? if so, what is turn around time?
ChaseBays took 391 weeks... LOL

PoorMans180SX · 07-29-2015, 10:36 AM

Quote:

Originally Posted by K_style

Nice !!!
Is it made to order? if so, what is turn around time?
ChaseBays took 391 weeks... LOL

HAHA, they are made to order, but the maximum turn around time is four weeks. We usually get them done in two.

Freddy · 07-29-2015, 06:50 PM

Damn I should have waiting till this special to order mine.

driftage240 · 07-29-2015, 11:34 PM

Price on these brake lines and also the clutch line (from master to slave) shipped to 91042 lmk

Zero-Offset · 07-30-2015, 12:56 AM

installed my kit finally, went in fantastic! more than enough line and everything went together smoothly. kit is easy to figure out. would support Whalen again!!!

PoorMans180SX · 07-30-2015, 08:24 AM

Quote:

Originally Posted by Freddy

Damn I should have waiting till this special to order mine.

You have a PM good sir.

Quote:

Originally Posted by driftage240

Price on these brake lines and also the clutch line (from master to slave) shipped to 91042 lmk

I'll shoot you a quote later today.

Quote:

Originally Posted by Zero-Offset

installed my kit finally, went in fantastic! more than enough line and everything went together smoothly. kit is easy to figure out. would support Whalen again!!!

Thanks for the kind words! Good to hear!

hellion240sx · 08-07-2015, 07:09 AM

do you have before and after shots of engine bay?

Mitsubayati · 08-07-2015, 03:11 PM

Is the fitting with the o-ring seal that goes into the high pressure side of the rack an off the shelf item or is it custom made? I've read that the off the shelf fittings do not correctly seal because they are slightly short and what people have done is machine it to get the o-ring to fit correctly.

PoorMans180SX · 08-10-2015, 10:24 AM

Quote:

Originally Posted by hellion240sx

do you have before and after shots of engine bay?

I only have after shots unfortunately!

Quote:

Originally Posted by Mitsubayati

Is the fitting with the o-ring seal that goes into the high pressure side of the rack an off the shelf item or is it custom made? I've read that the off the shelf fittings do not correctly seal because they are slightly short and what people have done is machine it to get the o-ring to fit correctly.

We use off-the-shelf fittings, but we've never had an issue with them leaking. I feel like people are often afraid to tighten them all the way.

Halfamazing · 08-10-2015, 06:07 PM

I know this says s13,z31,z32 but... I have a s14 master and I need this kit. Would it work or can you make me one?

PoorMans180SX · 08-11-2015, 01:01 PM

Quote:

Originally Posted by Halfamazing

I know this says s13,z31,z32 but... I have a s14 master and I need this kit. Would it work or can you make me one?

This kit won't work with a S14 master. If you were local, we could make you a kit, but I don't feel comfortable building a kit without the ability to test fit it. I've been trying to get a S14 in here for a while now, but so far haven't been able to. When we do, we'll build a kit and post it up!

07-28-2015, 04:22 PM	#1
PoorMans180SX Zilvia.net Advertiser Join Date: Nov 2005 Location: Michigan Age: 33 Posts: 5,431 Trader Rating: (16) Rides Gallery: PoorMans180SX Feedback Score: 16 reviews	WSRD Brake Line Relocation Kits! Our brake line relocation kits route under the factory crossmember, cleaning up the bay and making room for turbo setups. They're compatible with S13/Z31/Z32/Pathfinder master cylinders and are made in the USA! Teflon braided stainless line coated in a protective teflon outer shell means these are built to last! (Pictured with V1 High pressure power steering line). Comes with all the fittings to connect your master cylinder to the caliper and rear brake line(s). http://www.whalentuned.com/nissan-240sx.html Zilvia price: $199 shipped! PM me to order! __________________ Build: http://zilvia.net/f/showthread.php?t=643065 Friends don't let friends buy knock-offs. Last edited by PoorMans180SX; 07-29-2015 at 06:13 AM..

07-29-2015, 11:34 PM	#7
driftage240 Post Whore! Join Date: Sep 2005 Location: TUJUNGA Age: 37 Posts: 2,869 Trader Rating: (23) Feedback Score: 23 reviews	Price on these brake lines and also the clutch line (from master to slave) shipped to 91042 lmk __________________ Misty blu is coming 4 you!

07-30-2015, 12:56 AM	#8
Zero-Offset Zilvia Junkie Join Date: Nov 2006 Location: Vancouver BC Age: 30 Posts: 402 Trader Rating: (1) Feedback Score: 1 reviews	installed my kit finally, went in fantastic! more than enough line and everything went together smoothly. kit is easy to figure out. would support Whalen again!!! __________________ G O O D ★ V I B E S http://instagram.com/lowrize_

08-07-2015, 07:09 AM	#10
hellion240sx Zilvia FREAK! Join Date: Nov 2003 Location: NOLA Age: 40 Posts: 1,509 Trader Rating: (0) Feedback Score: 0 reviews	do you have before and after shots of engine bay? __________________ R.I.P. KAIN. YOU'LL ALWAYS BE BY MY SIDE! 240 addict miata addict

08-07-2015, 03:11 PM	#11
Mitsubayati Zilvia FREAK! Join Date: Aug 2007 Location: The Dro Posts: 1,424 Trader Rating: (18) Feedback Score: 18 reviews	Is the fitting with the o-ring seal that goes into the high pressure side of the rack an off the shelf item or is it custom made? I've read that the off the shelf fittings do not correctly seal because they are slightly short and what people have done is machine it to get the o-ring to fit correctly. __________________

07-29-2015, 06:14 AM	#4
K_style Post Whore! Join Date: Dec 2007 Location: Henderson, NV Posts: 7,666 Trader Rating: (63) Rides Gallery: K_style Feedback Score: 63 reviews	Nice !!! Is it made to order? if so, what is turn around time? ChaseBays took 391 weeks... LOL

07-29-2015, 06:50 PM	#6
Freddy Zilvia Junkie Join Date: Oct 2008 Location: Ottawa, Canada Age: 32 Posts: 568 Trader Rating: (2) Feedback Score: 2 reviews	Damn I should have waiting till this special to order mine.

08-10-2015, 06:07 PM	#13
Halfamazing Leaky Injector Join Date: Feb 2011 Location: Las Vegas Age: 36 Posts: 123 Trader Rating: (13) Feedback Score: 13 reviews	I know this says s13,z31,z32 but... I have a s14 master and I need this kit. Would it work or can you make me one? __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode