S14/ KA24De Wiring Harness Removal - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

naples-nissan · 04-16-2012, 04:24 PM

It would appear that not too many people have done or are in the process of swapping an automatic ka24 for a 5 speed rb20det. However, I am. . and this is my first car. But i'm managing pretty well so far. Almost everything is in order, except for the wiring. I have a complete harness for my rb, along with it's ecu. Everything is ready to be dropped in for what I'm assuming is the last time. But how do I remove the original KA24 wiring harness from the car. How do i do this??

future · 04-16-2012, 04:27 PM

Wow, just wow

Mesg length

Edwin562 · 04-16-2012, 04:27 PM

oh this is gonna be good.

naples-nissan · 04-16-2012, 04:29 PM

Quote:

Originally Posted by Edwin562

oh this is gonna be good.

what makes you say that?

KoukiMonster0917 · 07-09-2012, 12:36 PM

Hey, I'm have an s14 with the rb20det harness I'm removing, I figure it should be close? When I take it out I can let you know whats up if you still need help. It's an old thread so pm me if interested.

Dorifto Machine · 07-09-2012, 04:42 PM

A search would of yielded you many results

Follow this Guide:
S13 KA24DE Engine Removal : 240SX Technical Forum

Its pretty similar to removing the harness in your s14. Obviously disconnect all plugs in engine bay and pop grommet out. Unplug from ECU and disconnect dash connector plug ( It’ll be located behind the ECU in the back corner}, then disconnect the blue relay . Just take a look and you will see whats connected . Feed wires out of hole were grommet was. Done. Reverse to install said wire harness.

Dash Connector

KoukiMonster0917 · 07-09-2012, 04:54 PM

Yeah... I know how lol. The viper alarm attempt was (*****) rigged tho

Dorifto Machine · 07-09-2012, 04:56 PM

That was directed to the user who created this thread with the original question of "How To"

KoukiMonster0917 · 07-09-2012, 04:59 PM

Haha ok, its kinda old. Wonder how it turned out.

04-16-2012, 04:24 PM	#1
naples-nissan Join Date: Mar 2012 Location: Florida Posts: 15 Trader Rating: (0) Feedback Score: 0 reviews	S14/ KA24De Wiring Harness Removal It would appear that not too many people have done or are in the process of swapping an automatic ka24 for a 5 speed rb20det. However, I am. . and this is my first car. But i'm managing pretty well so far. Almost everything is in order, except for the wiring. I have a complete harness for my rb, along with it's ecu. Everything is ready to be dropped in for what I'm assuming is the last time. But how do I remove the original KA24 wiring harness from the car. How do i do this?? __________________ Selling s13 RB motor mounts, trade for s14 RB mounts

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

04-16-2012, 04:27 PM	#3
Edwin562 Post Whore! Join Date: Nov 2009 Location: Whittier (562) Age: 31 Posts: 4,721 Trader Rating: (35) Feedback Score: 35 reviews	oh this is gonna be good.

07-09-2012, 12:36 PM	#5
KoukiMonster0917 Join Date: Aug 2011 Location: McKinney, TX Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	Hey, I'm have an s14 with the rb20det harness I'm removing, I figure it should be close? When I take it out I can let you know whats up if you still need help. It's an old thread so pm me if interested.

07-09-2012, 04:42 PM	#6
Dorifto Machine Zilvia Addict Join Date: May 2011 Location: Orlando Fl. Posts: 698 Trader Rating: (17) Feedback Score: 17 reviews	A search would of yielded you many results Follow this Guide: S13 KA24DE Engine Removal : 240SX Technical Forum Its pretty similar to removing the harness in your s14. Obviously disconnect all plugs in engine bay and pop grommet out. Unplug from ECU and disconnect dash connector plug ( It’ll be located behind the ECU in the back corner}, then disconnect the blue relay . Just take a look and you will see whats connected . Feed wires out of hole were grommet was. Done. Reverse to install said wire harness. Dash Connector

07-09-2012, 04:54 PM	#7
KoukiMonster0917 Join Date: Aug 2011 Location: McKinney, TX Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	Yeah... I know how lol. The viper alarm attempt was (*****) rigged tho

07-09-2012, 04:56 PM	#8
Dorifto Machine Zilvia Addict Join Date: May 2011 Location: Orlando Fl. Posts: 698 Trader Rating: (17) Feedback Score: 17 reviews	That was directed to the user who created this thread with the original question of "How To"

07-09-2012, 04:59 PM	#9
KoukiMonster0917 Join Date: Aug 2011 Location: McKinney, TX Posts: 34 Trader Rating: (0) Feedback Score: 0 reviews	Haha ok, its kinda old. Wonder how it turned out.