my champagne gold s14 [build in progress] - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

mr_eh · 05-11-2011, 08:02 AM

shop building the car; Welcome to Pride Performance

the pictures may load slow, sorry.... or not at all the website that had them hosted is gone.

*made 501whp/400tq Feb 9th 2013

the video loads fast ! http://www.youtube.com/watch?v=NR84x...layer_embedded

[img]

[/img]

headlights;

before headlights

Let's start from the end;

and now, the beginning.

made 463whp @ 25lbs - pfc sensor doesnt work above 25lbs apparently

got a new one sitting in the glove box - will try for a race gas tune in fall of spring, not in a rush at the moment.

built & tuned by Frank @ http://www.pride-performance.com/

break in tune was put on by r/t tuning - they did a great job, I had planned on going there for the full tune but I saw [email protected] (who built the motor) was getting into tuning so I let him rip on it

way back in september of 2008 I bought this for 2000$

and then daily drove it until December of 2010...

and then whoa wild never been done before, the ka engine came out of the 240

and then omg totally didn't see it coming, started putting together an sr20

with a full race gt35r kit

twin scroll*

see those plastic lines? dont use those.

before moving stuff around in the engine bay

shinies

what car is complete without gauges and a headunit amirite!

looks boring!

omg ugly wheels

seibon hood installed

Waiting for some non lazy time to get the seibon trunk, origin front and rear over fenders on, zenki skirts/valance lip... building a ramp to get in and out of my driveway, fun stuff...

and then here's a list of stuff done to the car, wall of text sorry... may be a little out of date I stopped updating the spreadsheet at some point

>> braking
z32 30MM Aluminum 4 Piston Front and 2 Piston Rear Calipers
Hawk Pads
Brembo Rotors
z32 E-Brake Assembly, R32 E-Brake Lines
Meiji Performance 5 Lug Hub & Spindle
240sx->300zx Stainless Steel Brake Lines w/ Teflon Coating
z32 Brake master Cylinder

>> drivetrain
Mazworx SRVG Adapter Kit
Mazworx Z32 Transmission - Cleaned/Inspected/Machined For Adapter Plate + replaced with brand new synchros(was grinding 3rd to 4th)
Mazworx Scatter Shield
Exedy Ceramic Triple Plate
Os Giken Rear 1.5 way Diff

>> electronics
APEXi Power Fuel Commander
APEXi Turbo Timer
AEM Tru Boost Gauge +30psi sensor :X
AEM Oil Pressure Gauge
AEM Uego
S13 SR Harness

>> suspension
Tein Super Street Coilovers
OEM Replacement Inner/Outer Tie Rods
Stance Aluminum Diff. Bushing Set
Stance Aluminum Subframe Bushing Set

>> exterior / cosmetic
Zenki JDM OEM Rear Valances
Zenki OEM S14 Lip
Zenki JDM OEM Sideskirts
Seibon OEM Carbon Fiber Hood
Seibon OEM Carbon Fiber Trunk
Origin 50mm Rear Over Fenders
Origin 20mm Front Fenders
5zigen FN01R-C powder coated Shimmer Candy Teal
Rear 17×10 5×114.3 +12 w/ g-Force T/A Drag Radial 2 275/40/17
Front 17×9 5×114.3 + 15 w/ g-Force T/A KDW 2 245/40/17
Project Kic Titanium Lugs

>> fuel
Twin Walbro 255lph
RC Engineering 1000cc Injectors
Aeromotive Fuel Pressure Regulator
Greddy Fuel Rail

>> go slow
Full Race Turbo Kit
Gen 2 SR RWD Prostreet Twinscroll T4 Manifold
Gen 2 SR RWD 3.0in. Downpipe
Tial 44mm Wastegate x 2
Garrett GT35r 1.06 a/r
Optional FR S13 240SX/Silvia FMIC
Tial 50 mm BOV
Built By Pride Performance Engine Components:
SR20DET
Bored .20 Over
JE 2618 T6 Forged Pistons
Manley Turbo Tuff I-Beam Rods
Tomei Wrist Pins
Nismo Billet Crank
Nismo high Tencil Bearing Cap Bolts
Timken main and thrust bearings
ARP Head Studs
3 Angle Valve Job by JGY Customs
Greddy Rocker Arm Stoppers
Brian Crower Springs/Guides/Retainers
Greddy Intake Manifold
Greddy Oil Pan
Nismo Coil packs
HKS Step 2 264/272 Cams
Nissan Sr20det Full Gasket Set
Greddy Cam Gears
Cosworth Head Gasket
HKS Hi-Power Exhaust
Ebay TB port matched
ATI Super Damper Harmonic Crank Pulley
Greddy Oil Relocation Kit
Greddy Sandwich Plate
AMS? Catch Can

>> cooling
3"x 6" Turbo Flex Section
Flexlite Fans 14" Fans x 2
Koyo Radiator End Flow Setup
Setrab Oil Cooler/B&M 11x8 1.5 inch 1/2 " npt

and a video of it being dyno tuned

http://www.youtube.com/watch?v=NR84xyCNbHg

mr_eh · 05-11-2011, 08:03 AM

shitty cell phone picture... I was just happy I didn't have to look at the stock ride height anymore...

like a glove... still need to clock the turbo and move the reservoir... might not be a great idea to suck it into the turbo!

bushings bushings

and more bushings!

oh and more

no sir we aint drifting with this 1.5way

now it looks like my car...

I'll upload more pictures as I get them over the next few weeks...

evonam · 05-11-2011, 08:10 AM

I'd change the color. Something that stands out more.

Phate · 05-11-2011, 08:25 AM

The gold looks nice. How much power are you shooting for?

mr_eh · 05-11-2011, 08:29 AM

Quote:

Originally Posted by Phate

The gold looks nice. How much power are you shooting for?

Hoping for 500.

DriftinAndy · 05-11-2011, 08:53 AM

Oh man thats NICEEE...very clean!!...sure makes mine look like a kids toy..lol..when you plan on finishing it?..

mr_eh · 05-11-2011, 08:55 AM

Quote:

Originally Posted by DriftinAndy

Oh man thats NICEEE...very clean!!...sure makes mine look like a kids toy..lol..when you plan on finishing it?..

Hopefully this month

Highway Riding · 05-11-2011, 09:29 AM

Looking good. Keep it up!

Nick_04K · 05-11-2011, 02:13 PM

Paint car red. (Including CF pieces)
Paint Engine bay white. (See 29psiHybrid's build thread for stunning example)
Then just enjoy how awesome your car is.

Pretty please?

tricky_ab · 05-11-2011, 03:09 PM

Quote:

Originally Posted by Nick_04K

Paint car red. (Including CF pieces)
Paint Engine bay white. (See 29psiHybrid's build thread for stunning example)
Then just enjoy how awesome your car is.

Pretty please?

Co-signed with sugar on top?

surge s14 · 05-11-2011, 03:54 PM

impressive!

stay gold man!

SPECIALTURD · 05-11-2011, 05:15 PM

wow 2000 bucks sounds good. I also bought my s14 from a repo yard for 2 grand plus it was se 5 speed original. hahaha free bump for a s14 owner.

mr_eh · 05-11-2011, 05:40 PM

Quote:

Originally Posted by Nick_04K

Paint car red. (Including CF pieces)
Paint Engine bay white. (See 29psiHybrid's build thread for stunning example)
Then just enjoy how awesome your car is.

Pretty please?

too many red ones in the tri state area!

Quote:

Originally Posted by surge s14

impressive!

stay gold man!

plan on it, none of my friends like it so it makes me want to keep it even more

Quote:

Originally Posted by SPECIALTURD

wow 2000 bucks sounds good. I also bought my s14 from a repo yard for 2 grand plus it was se 5 speed original. hahaha free bump for a s14 owner.

nice, I didn't mind so much that it was a base and auto cause I was dead set on following through with modding it ...

PHX-S14 · 05-11-2011, 07:08 PM

yea its better to have something different..it makes it more unique..looking good man

nice ferrari in the background by the way..

Imarvin240 · 05-11-2011, 07:42 PM

cars looking good man!

nomoremk2 · 05-11-2011, 07:47 PM

That ferrari is probably the least cool car at Pride haha. You should see that back lot it's intercooler city. Cool build man but I feel like you should do something with that engine bay. Clean it up and paint that sucker while you have the motor out.

Irresistible · 05-11-2011, 08:29 PM

Lovin it, but the gold............. Eh. My car used to be gold though. Kinda grew on me, but idk. Can look good though.

mr_eh · 05-12-2011, 01:54 PM

Quote:

Originally Posted by nomoremk2

That ferrari is probably the least cool car at Pride haha. You should see that back lot it's intercooler city. Cool build man but I feel like you should do something with that engine bay. Clean it up and paint that sucker while you have the motor out.

I should have painted the engine bay if I was building a show car - I wholeheartedly agree - and contemplated painting it even though it is just a street car... I like that it has some character/scars

Quote:

Originally Posted by Irresistible

Lovin it, but the gold............. Eh. My car used to be gold though. Kinda grew on me, but idk. Can look good though.

I'm not the biggest fan of gold, but... I'll make it work!

mr_eh · 05-25-2011, 06:33 AM

temp wheels, waiting on mine, should be here this week...

Highway Riding · 05-25-2011, 08:14 AM

Top Secret gold would freshen that right up and you don't have to mess with the title.. Nice car BTW

mr_eh · 05-25-2011, 08:18 AM

Quote:

Originally Posted by Highway Riding

Top Secret gold would freshen that right up and you don't have to mess with the title.. Nice car BTW

To get the paint from Top Secret you have to submit your build and the head engineer has to approve of the car for them to consider selling you the paint, and it's not cheap... spoke to one of their usa reps 8 or so months ago just for laughs

aristrutin · 05-25-2011, 08:26 AM

looks clean man!

ixfxi · 05-25-2011, 08:36 AM

Quote:

Originally Posted by mr_eh

To get the paint from Top Secret you have to submit your build and the head engineer has to approve of the car for them to consider selling you the paint, and it's not cheap... spoke to one of their usa reps 8 or so months ago just for laughs

why not just match their paint code

its not science

mr_eh · 05-25-2011, 08:48 AM

Quote:

Originally Posted by ixfxi

why not just match their paint code

its not science

fakery is fake, oem gold is just fine!

dazed · 05-25-2011, 08:54 AM

Because it would be fairly hard to match the paint down to a science?
Sure you could just show your paint shop a picture of it, but thats not going to be close to the real thing.

And how many cars are running around with authentic top secret paint to get a sample from them? Not many.

I mean if you don't have a problem just getting close to it, then I'd go for it.

Kinda like special order Volk wheel colors - Takata Green and F-Zero "I just jizzed" Blue.

Oh, and sweet build

EDacIouSX · 05-25-2011, 10:48 AM

grossss pin stripes, i hate em. so glad my car didnt have it!

Your car's looking good dood. I want to see how that twin scroll setup works out, i'm thnking of the same thing.

mr_eh · 05-25-2011, 10:52 AM

Quote:

Originally Posted by EDacIouSX

grossss pin stripes, i hate em. so glad my car didnt have it!

Your car's looking good dood. I want to see how that twin scroll setup works out, i'm thnking of the same thing.

yeah that pinstripe is peacing out when it goes to paint, I've never seen another 240 with one... should be running in another week or so, had a little issue with the turbo hitting the bmc

Nicksx · 05-25-2011, 11:03 AM

looks boss. wish i could find a s14 for 2k here in Washington. shit. even an auto non se.

mr_eh · 05-25-2011, 11:06 AM

mine was an auto base, converted to 5 lug and manual!

mr_eh · 05-25-2011, 11:10 AM

oh hey just got a text from the shop that got a picture from the powder coater

05-11-2011, 08:02 AM	#1
mr_eh Zilvia Junkie Join Date: Oct 2008 Location: Staten Island / Central Jersey Age: 39 Posts: 466 Trader Rating: (2) Feedback Score: 2 reviews	my champagne gold s14 [build in progress] shop building the car; Welcome to Pride Performance the pictures may load slow, sorry.... or not at all the website that had them hosted is gone. made 501whp/400tq Feb 9th 2013 the video loads fast ! http://www.youtube.com/watch?v=NR84x...layer_embedded [img] [/img] headlights; before headlights Let's start from the end; and now, the beginning. made 463whp @ 25lbs - pfc sensor doesnt work above 25lbs apparently got a new one sitting in the glove box - will try for a race gas tune in fall of spring, not in a rush at the moment. built & tuned by Frank @ http://www.pride-performance.com/ break in tune was put on by r/t tuning - they did a great job, I had planned on going there for the full tune but I saw [email protected] (who built the motor) was getting into tuning so I let him rip on it way back in september of 2008 I bought this for 2000$ and then daily drove it until December of 2010... and then whoa wild never been done before, the ka engine came out of the 240 and then omg totally didn't see it coming, started putting together an sr20 with a full race gt35r kit twin scroll see those plastic lines? dont use those. before moving stuff around in the engine bay shinies what car is complete without gauges and a headunit amirite! looks boring! omg ugly wheels seibon hood installed Waiting for some non lazy time to get the seibon trunk, origin front and rear over fenders on, zenki skirts/valance lip... building a ramp to get in and out of my driveway, fun stuff... and then here's a list of stuff done to the car, wall of text sorry... may be a little out of date I stopped updating the spreadsheet at some point >> braking z32 30MM Aluminum 4 Piston Front and 2 Piston Rear Calipers Hawk Pads Brembo Rotors z32 E-Brake Assembly, R32 E-Brake Lines Meiji Performance 5 Lug Hub & Spindle 240sx->300zx Stainless Steel Brake Lines w/ Teflon Coating z32 Brake master Cylinder >> drivetrain Mazworx SRVG Adapter Kit Mazworx Z32 Transmission - Cleaned/Inspected/Machined For Adapter Plate + replaced with brand new synchros(was grinding 3rd to 4th) Mazworx Scatter Shield Exedy Ceramic Triple Plate Os Giken Rear 1.5 way Diff >> electronics APEXi Power Fuel Commander APEXi Turbo Timer AEM Tru Boost Gauge +30psi sensor :X AEM Oil Pressure Gauge AEM Uego S13 SR Harness >> suspension Tein Super Street Coilovers OEM Replacement Inner/Outer Tie Rods Stance Aluminum Diff. Bushing Set Stance Aluminum Subframe Bushing Set >> exterior / cosmetic Zenki JDM OEM Rear Valances Zenki OEM S14 Lip Zenki JDM OEM Sideskirts Seibon OEM Carbon Fiber Hood Seibon OEM Carbon Fiber Trunk Origin 50mm Rear Over Fenders Origin 20mm Front Fenders 5zigen FN01R-C powder coated Shimmer Candy Teal Rear 17×10 5×114.3 +12 w/ g-Force T/A Drag Radial 2 275/40/17 Front 17×9 5×114.3 + 15 w/ g-Force T/A KDW 2 245/40/17 Project Kic Titanium Lugs >> fuel Twin Walbro 255lph RC Engineering 1000cc Injectors Aeromotive Fuel Pressure Regulator Greddy Fuel Rail >> go slow Full Race Turbo Kit Gen 2 SR RWD Prostreet Twinscroll T4 Manifold Gen 2 SR RWD 3.0in. Downpipe Tial 44mm Wastegate x 2 Garrett GT35r 1.06 a/r Optional FR S13 240SX/Silvia FMIC Tial 50 mm BOV Built By Pride Performance Engine Components: SR20DET Bored .20 Over JE 2618 T6 Forged Pistons Manley Turbo Tuff I-Beam Rods Tomei Wrist Pins Nismo Billet Crank Nismo high Tencil Bearing Cap Bolts Timken main and thrust bearings ARP Head Studs 3 Angle Valve Job by JGY Customs Greddy Rocker Arm Stoppers Brian Crower Springs/Guides/Retainers Greddy Intake Manifold Greddy Oil Pan Nismo Coil packs HKS Step 2 264/272 Cams Nissan Sr20det Full Gasket Set Greddy Cam Gears Cosworth Head Gasket HKS Hi-Power Exhaust Ebay TB port matched ATI Super Damper Harmonic Crank Pulley Greddy Oil Relocation Kit Greddy Sandwich Plate AMS? Catch Can >> cooling 3"x 6" Turbo Flex Section Flexlite Fans 14" Fans x 2 Koyo Radiator End Flow Setup Setrab Oil Cooler/B&M 11x8 1.5 inch 1/2 " npt and a video of it being dyno tuned http://www.youtube.com/watch?v=NR84xyCNbHg __________________ My 96 S14 \| 501whp SOLD Last edited by mr_eh; 05-06-2013 at 07:07 PM..

05-11-2011, 08:03 AM	#2
mr_eh Zilvia Junkie Join Date: Oct 2008 Location: Staten Island / Central Jersey Age: 39 Posts: 466 Trader Rating: (2) Feedback Score: 2 reviews	shitty cell phone picture... I was just happy I didn't have to look at the stock ride height anymore... like a glove... still need to clock the turbo and move the reservoir... might not be a great idea to suck it into the turbo! bushings bushings and more bushings! oh and more no sir we aint drifting with this 1.5way now it looks like my car... I'll upload more pictures as I get them over the next few weeks... __________________ My 96 S14 \| 501whp SOLD Last edited by mr_eh; 05-12-2011 at 05:36 PM..

05-11-2011, 08:53 AM	#6
DriftinAndy Leaky Injector Join Date: Mar 2006 Location: ontario, Ca Posts: 136 Trader Rating: (0) Feedback Score: 0 reviews	Oh man thats NICEEE...very clean!!...sure makes mine look like a kids toy..lol..when you plan on finishing it?.. __________________ "BEHOLD A PALE HORSE...

05-11-2011, 03:54 PM	#11
surge s14 Zilvia FREAK! Join Date: Dec 2005 Location: Laredo Texas Posts: 1,125 Trader Rating: (12) Feedback Score: 12 reviews	impressive! stay gold man! __________________

05-11-2011, 07:42 PM	#15
Imarvin240 Nissanaholic! Join Date: Dec 2010 Location: king of prussia, PA! Posts: 1,721 Trader Rating: (18) Feedback Score: 18 reviews	cars looking good man! __________________ https://instagram.com/eck_matthew/

05-11-2011, 08:10 AM	#3
evonam Join Date: Mar 2010 Location: NJ Posts: 1 Trader Rating: (0) Feedback Score: 0 reviews	I'd change the color. Something that stands out more.

05-11-2011, 09:29 AM	#8
Highway Riding Zilvia Addict Join Date: Feb 2010 Location: Out on the Highway! Posts: 602 Trader Rating: (1) Feedback Score: 1 reviews	Looking good. Keep it up!

05-11-2011, 02:13 PM	#9
Nick_04K Zilvia Junkie Join Date: Jun 2010 Location: Vernal, UT Age: 27 Posts: 467 Trader Rating: (0) Feedback Score: 0 reviews	Paint car red. (Including CF pieces) Paint Engine bay white. (See 29psiHybrid's build thread for stunning example) Then just enjoy how awesome your car is. Pretty please?

05-11-2011, 05:15 PM	#12
SPECIALTURD Zilvia Member Join Date: Nov 2010 Location: SO-CAL / L.A Age: 34 Posts: 208 Trader Rating: (3) Feedback Score: 3 reviews	wow 2000 bucks sounds good. I also bought my s14 from a repo yard for 2 grand plus it was se 5 speed original. hahaha free bump for a s14 owner.

05-11-2011, 07:08 PM	#14
PHX-S14 Leaky Injector Join Date: Mar 2011 Location: Phoenix, Az Age: 32 Posts: 139 Trader Rating: (1) Feedback Score: 1 reviews	yea its better to have something different..it makes it more unique..looking good man nice ferrari in the background by the way..

05-11-2011, 07:47 PM	#16
nomoremk2 Zilvia Member Join Date: Sep 2010 Location: South jersey Age: 31 Posts: 293 Trader Rating: (1) Feedback Score: 1 reviews	That ferrari is probably the least cool car at Pride haha. You should see that back lot it's intercooler city. Cool build man but I feel like you should do something with that engine bay. Clean it up and paint that sucker while you have the motor out.

05-11-2011, 08:29 PM	#17
Irresistible Nissanaholic! Join Date: Dec 2009 Location: Chicago, IL Posts: 1,994 Trader Rating: (21) Feedback Score: 21 reviews	Lovin it, but the gold............. Eh. My car used to be gold though. Kinda grew on me, but idk. Can look good though. __________________ GLEAM//★☆Street Dancer☆★ IG: streetdncr // tumblr: steve-strtdncr

05-25-2011, 06:33 AM	#19
mr_eh Zilvia Junkie Join Date: Oct 2008 Location: Staten Island / Central Jersey Age: 39 Posts: 466 Trader Rating: (2) Feedback Score: 2 reviews	temp wheels, waiting on mine, should be here this week... __________________ My 96 S14 \| 501whp SOLD

05-25-2011, 08:14 AM	#20
Highway Riding Zilvia Addict Join Date: Feb 2010 Location: Out on the Highway! Posts: 602 Trader Rating: (1) Feedback Score: 1 reviews	Top Secret gold would freshen that right up and you don't have to mess with the title.. Nice car BTW

05-25-2011, 08:26 AM	#22
aristrutin Join Date: May 2011 Location: lake worth FL Age: 28 Posts: 13 Trader Rating: (0) Feedback Score: 0 reviews	looks clean man!

05-25-2011, 08:54 AM	#25
dazed Zilvia FREAK! Join Date: Jan 2011 Location: WA Posts: 1,336 Trader Rating: (36) Feedback Score: 36 reviews	Because it would be fairly hard to match the paint down to a science? Sure you could just show your paint shop a picture of it, but thats not going to be close to the real thing. And how many cars are running around with authentic top secret paint to get a sample from them? Not many. I mean if you don't have a problem just getting close to it, then I'd go for it. Kinda like special order Volk wheel colors - Takata Green and F-Zero "I just jizzed" Blue. Oh, and sweet build

05-25-2011, 10:48 AM	#26
EDacIouSX Post Whore! Join Date: Nov 2004 Location: Los Angeles Age: 35 Posts: 4,527 Trader Rating: (53) Rides Gallery: EDacIouSX Feedback Score: 53 reviews	grossss pin stripes, i hate em. so glad my car didnt have it! Your car's looking good dood. I want to see how that twin scroll setup works out, i'm thnking of the same thing.

05-25-2011, 11:03 AM	#28
Nicksx Join Date: Feb 2011 Location: Arlington Age: 29 Posts: 10 Trader Rating: (0) Feedback Score: 0 reviews	looks boss. wish i could find a s14 for 2k here in Washington. shit. even an auto non se. __________________ 1991 Nissan 240sx OEM+ 90's style

05-25-2011, 11:06 AM	#29
mr_eh Zilvia Junkie Join Date: Oct 2008 Location: Staten Island / Central Jersey Age: 39 Posts: 466 Trader Rating: (2) Feedback Score: 2 reviews	mine was an auto base, converted to 5 lug and manual! __________________ My 96 S14 \| 501whp SOLD

05-25-2011, 11:10 AM	#30
mr_eh Zilvia Junkie Join Date: Oct 2008 Location: Staten Island / Central Jersey Age: 39 Posts: 466 Trader Rating: (2) Feedback Score: 2 reviews	oh hey just got a text from the shop that got a picture from the powder coater __________________ My 96 S14 \| 501whp SOLD

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode