Info on hotpipe topmount Sr20det - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Sr20-Vert · 03-13-2019, 10:05 PM

Hey guys are there any company that sell hot pipes for Sr20det with top mount turbo mine is kinda rigged and doesn’t fit to well I have a peakboost manifold and greddy intercooler

Jfornachon · 03-14-2019, 12:13 AM

I have a hot pipe that comes directly off the turbo down to where the frame. I can get a picture of it if you want.

RalliartRsX · 03-14-2019, 06:01 AM

It literally would be cheaper and increase your chances of fitment if you just take measurements and buy the necessary pipework and then take it somewhere to be tig welded.

jr_ss · 03-17-2019, 06:28 PM

Quote:

Originally Posted by RalliartRsX

It literally would be cheaper and increase your chances of fitment if you just take measurements and buy the necessary pipework and then take it somewhere to be tig welded.

This is your best option... You pay for labor, but you have a piece that fits like factory when it’s sll said a done.

lewisfk · 03-17-2019, 09:55 PM

I'm in the same boat with my full race top mount setup. The intercooler setup will be one of the last things I knock out in the engine bay. I have a Greddy ls intercooler and it looks like I will need a 22-inch pipe to complete the setup. Vibrant has what u need.

Sr20-Vert · 03-18-2019, 08:53 AM

Can you send link for the vibrant part

lewisfk · 03-18-2019, 01:50 PM

My military computer is blocking vibrant website but I was able to find it on Amazon.

https://www.amazon.com/d/Turbocharge...ing/B000E43BM6

RalliartRsX · 03-18-2019, 02:05 PM

^^ and you would still have to measure and take it to get tig welded (as I mentioned before lol). Also, if you need it to go from the turbo to the frame (turbo 90 or 45 or whatever angle down), one would need atleast another 45 or 90 degree pipe with 6 or so " legs.

OP, you could have had the proper pipework welded up by now if you just went a fabricator instead of waiting on Zilvia to provide you the answer. That or go search Google for top mount intercooler setup and take that to a fabricator and tell him to replicate.

Good luck!

03-13-2019, 10:05 PM	#1
Sr20-Vert Leaky Injector Join Date: Mar 2011 Location: hollywood Age: 35 Posts: 136 Trader Rating: (1) Feedback Score: 1 reviews	Info on hotpipe topmount Sr20det Hey guys are there any company that sell hot pipes for Sr20det with top mount turbo mine is kinda rigged and doesn’t fit to well I have a peakboost manifold and greddy intercooler

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

03-14-2019, 12:13 AM	#2
Jfornachon Zilvia Junkie Join Date: Dec 2011 Location: Caldwell Idaho Posts: 300 Trader Rating: (3) Feedback Score: 3 reviews	I have a hot pipe that comes directly off the turbo down to where the frame. I can get a picture of it if you want.

03-14-2019, 06:01 AM	#3
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	It literally would be cheaper and increase your chances of fitment if you just take measurements and buy the necessary pipework and then take it somewhere to be tig welded.

03-17-2019, 09:55 PM	#5
lewisfk Zilvia FREAK! Join Date: May 2009 Location: North Austin, Texas Age: 40 Posts: 1,162 Trader Rating: (13) Feedback Score: 13 reviews	I'm in the same boat with my full race top mount setup. The intercooler setup will be one of the last things I knock out in the engine bay. I have a Greddy ls intercooler and it looks like I will need a 22-inch pipe to complete the setup. Vibrant has what u need.

03-18-2019, 08:53 AM	#6
Sr20-Vert Leaky Injector Join Date: Mar 2011 Location: hollywood Age: 35 Posts: 136 Trader Rating: (1) Feedback Score: 1 reviews	Can you send link for the vibrant part

03-18-2019, 01:50 PM	#7
lewisfk Zilvia FREAK! Join Date: May 2009 Location: North Austin, Texas Age: 40 Posts: 1,162 Trader Rating: (13) Feedback Score: 13 reviews	My military computer is blocking vibrant website but I was able to find it on Amazon. https://www.amazon.com/d/Turbocharge...ing/B000E43BM6

03-18-2019, 02:05 PM	#8
RalliartRsX Post Whore! Join Date: Apr 2006 Location: Maryland Posts: 4,753 Trader Rating: (32) Feedback Score: 32 reviews	^^ and you would still have to measure and take it to get tig welded (as I mentioned before lol). Also, if you need it to go from the turbo to the frame (turbo 90 or 45 or whatever angle down), one would need atleast another 45 or 90 degree pipe with 6 or so " legs. OP, you could have had the proper pipework welded up by now if you just went a fabricator instead of waiting on Zilvia to provide you the answer. That or go search Google for top mount intercooler setup and take that to a fabricator and tell him to replicate. Good luck!