Gleeso's Sileighty - Page 2 - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Gleeso · 10-03-2012, 10:32 AM

Just ordered the Oil Cooler. Couldn't wait.

Twinkies! · 10-03-2012, 11:34 AM

Dang, high quality parts, nice attention to detail and props on doing everything right, really like where this build is going, can't wait to see it painted and the motor in it

Gleeso · 10-04-2012, 04:03 AM

Quote:

Originally Posted by Twinkies!

Dang, high quality parts, nice attention to detail and props on doing everything right, really like where this build is going, can't wait to see it painted and the motor in it

Just how I like it! High quality parts are a must. I have a slight case of OCD, so attention to detail is quite adamant.

Me too!! A few more things to cut/drill before paint goes on. Engine shouldn't be far off from that.

Gleeso · 10-04-2012, 05:06 AM

Got the rest of the PBM order today. Sooo happy!

Here's the hoses/clamps and pipes for the intercooler:

Here's the hydraulic handbrake, intake pipe and hoses/clamps, adjustable knob and drift button:

Annnd the Swirl Pot:

Alllll of the parts!

Gleeso · 10-10-2012, 12:13 AM

Got the oil cooler in the mail today. Should do the job!

Try imagine it sitting underneath the intercooler. Will look clean.

Gleeso · 10-10-2012, 04:55 AM

Just picked this Carbing Air Diversion Plate Kit from VisionR, much better than the GKTech equivalent.

Gleeso · 10-11-2012, 09:31 AM

Made brackets up for the Oil Cooler today.

Test fit with HMIC to make sure I get it sitting where I want it.

After getting some measurements, I went to my mates and got some brackets made up.

Next order will be for pistons and what not.

Lil_D · 10-11-2012, 12:34 PM

looks good man! what oil cooler is that?

Gleeso · 10-11-2012, 06:48 PM

Quote:

Originally Posted by Lil_D

looks good man! what oil cooler is that?

Cheers mate! It's just a China one, but I don't think it'll fuck up. If it does, I'll just buy the PWR Cooler which this one is based off.

Gleeso · 10-12-2012, 08:10 AM

Just ordered a Tomei Fuel Pressure Gauge and a Tomei Fuel Pressure Regulator Type S. TOMEI!!!!

Gleeso · 10-18-2012, 08:36 AM

Just spent this afternoon unbolting the rest of the sheet in the engine bay, like suspension etc. I want it all bare so the paint goes to the places that it should.

Will get to stripping the paint off soon.

future · 10-18-2012, 08:47 AM

What color?

Darren · 10-18-2012, 09:59 AM

Looking good! subbed for results...

Curious why, since you're doing all this work in the bay anyway, you're not doing tubs...

Gleeso · 10-20-2012, 02:17 AM

Quote:

Originally Posted by future

What color?

It'll be a Machinery Primer Grey, I believe that's what it's called.

Gleeso · 10-20-2012, 02:21 AM

Quote:

Originally Posted by Darren

Looking good! subbed for results...

Curious why, since you're doing all this work in the bay anyway, you're not doing tubs...

Darren, I'm disliking you a lot right now.

I scrolled through my thread the other day, but didn't have time to reply to the comments, so just had a quick read, and your comment really stuck in my head. It was a bloody good question.
Now, I'm here to tell you that I've since sorted out some tubs. Some pretty awesome ones, too! Damn you peer pressure. Damn you Darren and your great ideas. Haha.

*In case you hadn't caught on, I'm joking around, but the actual purchase of tubs is factual.*

Darren · 10-21-2012, 10:13 AM

haha, glad i could help

Can't wait for pics!

Gleeso · 10-21-2012, 09:22 PM

Recieved my Tomei Fuel Pressure Gauge this morning. For such a simple item, you can still feel the quality. Tomei <3

Will be a little delay on the on the Tomei FPR. The one I originally ordered was a fake, but that's all sorted out now. Genuine FPR will come when the internals do.

*StryfeS13* · 10-21-2012, 09:54 PM

Some good parts and good work here man! Keep us updated!

Gleeso · 10-23-2012, 12:16 PM

Quote:

Originally Posted by StryfeS13

Some good parts and good work here man! Keep us updated!

Thanks mate, I shall do my best to keep this thread pleasing to the eye.

Gleeso · 10-31-2012, 03:20 AM

Shit update, is shit.

Got these Super Pro Polyurethane Steering Rack Bushes in the mail today.

With the solid steering spacer and all the other suspension related upgrades, and now these bushes, the steering should feel fantastic.

Gleeso · 11-08-2012, 07:07 AM

Rex Kelway Tubs should arrive next week. Also, CP Pistons/ Manley Rods/ Tomei FPR and Mazworx Full Length Head Studs have been payed for, probably get them in a week or two.

Will need to order my Nismo Main Bearings some time soon, as well.

I started sanding the engine bay with some 120g, but I still need to take the steering column out so I can sand the drivers side area properly.

Gleeso · 11-15-2012, 04:49 AM

Been an interesting day.

Missed a delivery of something this morning, was disappointed. Went to go drop something off at uni in the Rolla, than its gearbox decided to shit itself. Luckily I was told the FWD 4AGE gearboxes are easy to come by, so I scored this for $50.00, just need install it.

Ended up being able to pick the delivery up a little earlier. Turned out to be my Rex Kelway Tubs, YEAHH BUDDYYY!

Test fit of the tubs. Can't wait to have them fitted.

BiG MiKE86 · 11-15-2012, 05:33 AM

Whoa! Those tubs are sex! WHo sells those?

Gleeso · 11-15-2012, 05:45 AM

Quote:

Originally Posted by BiG MiKE86

Whoa! Those tubs are sex! WHo sells those?

I know right!!

A bloke over in South Australia makes them. Rex Kelway is his name, and he does a lot of other stuff as well. They're literally a chop out, weld in dealio.

Here's a thread with some of his creations in it:

Rex Kelway sucks. - Hardtuned.net

Worth a read.

59bhp · 11-15-2012, 06:10 AM

how did you manage to contact him to buy the tubs?

had a quick look but other than pm i couldnt see a way?

Gleeso · 11-15-2012, 06:32 AM

Quote:

Originally Posted by 59bhp

how did you manage to contact him to buy the tubs?

had a quick look but other than pm i couldn't see a way?

I used Tengoku Imports (Facebook them). They're a Western Australian company. Don't really know anyone who could help sort you out.

Sorry for the lack of info. I hope he gets back to you, that's if you PM'd him, that is.

59bhp · 11-15-2012, 07:07 AM

Quote:

Originally Posted by Gleeso

I used Tengoku Imports (Facebook them). They're a Western Australian company. Don't really know anyone who could help sort you out.

Sorry for the lack of info. I hope he gets back to you, that's if you PM'd him, that is.

fantastic will give it a shot bud thanks,

very nice build by the way

out of interest how much were the tubs if you dont mind me asking (feel free to tell me to sod off lol) pm me if you like

Gleeso · 11-15-2012, 07:31 AM

Quote:

Originally Posted by 59bhp

fantastic will give it a shot bud thanks,

very nice build by the way

out of interest how much were the tubs if you dont mind me asking (feel free to tell me to sod off lol) pm me if you like

Thanks mate.

They cost an arm and a leg, but in my opinion, was totally worth it.

They cost $650.00 delivered. I had extra money from selling my coilies and impulsively ordered these, haha.

180love · 11-15-2012, 08:36 AM

Awesome build! Cant wait to see more.

Darren · 11-16-2012, 09:34 AM

Glad to see you did the tubs now.

You would have gotten everything back together and been pissed when you realized you should have done it while it was apart

Should look great when they're installed!

10-11-2012, 12:34 PM	#38
Lil_D Zilvia Addict Join Date: Nov 2010 Location: The Bay Area Age: 28 Posts: 733 Trader Rating: (5) Feedback Score: 5 reviews	looks good man! what oil cooler is that? __________________ @lild415

11-15-2012, 05:33 AM	#53
BiG MiKE86 Nissanaholic! Join Date: Mar 2007 Location: Ft. Lauderdale Age: 35 Posts: 1,776 Trader Rating: (12) Feedback Score: 12 reviews	Whoa! Those tubs are sex! WHo sells those? __________________

11-15-2012, 08:36 AM	#59
180love Zilvia Junkie Join Date: Dec 2008 Location: south FL Age: 31 Posts: 416 Trader Rating: (3) Feedback Score: 3 reviews	Awesome build! Cant wait to see more. __________________ http://www.53reynolds.wordpress.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

10-03-2012, 10:32 AM	#31
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Just ordered the Oil Cooler. Couldn't wait.

10-03-2012, 11:34 AM	#32
Twinkies! Zilvia Junkie Join Date: Apr 2012 Location: Rosamond California Posts: 546 Trader Rating: (2) Feedback Score: 2 reviews	Dang, high quality parts, nice attention to detail and props on doing everything right, really like where this build is going, can't wait to see it painted and the motor in it

10-04-2012, 05:06 AM	#34
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Got the rest of the PBM order today. Sooo happy! Here's the hoses/clamps and pipes for the intercooler: Here's the hydraulic handbrake, intake pipe and hoses/clamps, adjustable knob and drift button: Annnd the Swirl Pot: Alllll of the parts!

10-10-2012, 12:13 AM	#35
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Got the oil cooler in the mail today. Should do the job! Try imagine it sitting underneath the intercooler. Will look clean.

10-10-2012, 04:55 AM	#36
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Just picked this Carbing Air Diversion Plate Kit from VisionR, much better than the GKTech equivalent.

10-11-2012, 09:31 AM	#37
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Made brackets up for the Oil Cooler today. Test fit with HMIC to make sure I get it sitting where I want it. After getting some measurements, I went to my mates and got some brackets made up. Next order will be for pistons and what not.

10-12-2012, 08:10 AM	#40
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Just ordered a Tomei Fuel Pressure Gauge and a Tomei Fuel Pressure Regulator Type S. TOMEI!!!!

10-18-2012, 08:36 AM	#41
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Just spent this afternoon unbolting the rest of the sheet in the engine bay, like suspension etc. I want it all bare so the paint goes to the places that it should. Will get to stripping the paint off soon.

10-18-2012, 09:59 AM	#43
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 45 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	Looking good! subbed for results... Curious why, since you're doing all this work in the bay anyway, you're not doing tubs...

10-21-2012, 10:13 AM	#46
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 45 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	haha, glad i could help Can't wait for pics!

10-21-2012, 09:22 PM	#47
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Recieved my Tomei Fuel Pressure Gauge this morning. For such a simple item, you can still feel the quality. Tomei <3 Will be a little delay on the on the Tomei FPR. The one I originally ordered was a fake, but that's all sorted out now. Genuine FPR will come when the internals do.

10-21-2012, 09:54 PM	#48
StryfeS13 It's Always Broken. Join Date: Feb 2010 Location: Fresno, CA Posts: 1,363 Trader Rating: (14) Feedback Score: 14 reviews	Some good parts and good work here man! Keep us updated!

10-31-2012, 03:20 AM	#50
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Shit update, is shit. Got these Super Pro Polyurethane Steering Rack Bushes in the mail today. With the solid steering spacer and all the other suspension related upgrades, and now these bushes, the steering should feel fantastic.

11-08-2012, 07:07 AM	#51
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Rex Kelway Tubs should arrive next week. Also, CP Pistons/ Manley Rods/ Tomei FPR and Mazworx Full Length Head Studs have been payed for, probably get them in a week or two. Will need to order my Nismo Main Bearings some time soon, as well. I started sanding the engine bay with some 120g, but I still need to take the steering column out so I can sand the drivers side area properly.

11-15-2012, 04:49 AM	#52
Gleeso Leaky Injector Join Date: Aug 2012 Location: Australia Age: 30 Posts: 131 Trader Rating: (0) Feedback Score: 0 reviews	Been an interesting day. Missed a delivery of something this morning, was disappointed. Went to go drop something off at uni in the Rolla, than its gearbox decided to shit itself. Luckily I was told the FWD 4AGE gearboxes are easy to come by, so I scored this for $50.00, just need install it. Ended up being able to pick the delivery up a little earlier. Turned out to be my Rex Kelway Tubs, YEAHH BUDDYYY! Test fit of the tubs. Can't wait to have them fitted.

11-15-2012, 06:10 AM	#55
59bhp Zilvia Junkie Join Date: Jun 2010 Location: uk Posts: 379 Trader Rating: (4) Feedback Score: 4 reviews	how did you manage to contact him to buy the tubs? had a quick look but other than pm i couldnt see a way?

11-16-2012, 09:34 AM	#60
Darren Zilvia Addict Join Date: Apr 2010 Location: kelowna, bc, canada Age: 45 Posts: 680 Trader Rating: (1) Feedback Score: 1 reviews	Glad to see you did the tubs now. You would have gotten everything back together and been pissed when you realized you should have done it while it was apart Should look great when they're installed!