|
Home | Rules & Guidelines | Register | Member Rides | FAQ | Members List | Social Groups | Calendar | Mark Forums Read |
For Sale Items Post items for sale here. ABSOLUTELY NO COMMERCIAL SALES. |
|
Thread Tools | Display Modes |
|
06-23-2021, 01:19 PM | #1 | |
Zilvia Junkie
|
RSR-EXmag Catback s13. like new
PRICE LOWERED
$500 OBO Pickup in 90501. Will ship for extra but wont be cheap PM if interested I bought this about 10 years ago used and was installed on my s13 ka24de ever since and didn't get pulled over once due to noise or modified exhaust as it looks stockish (your results may vary). this is Very hard to find in this condition. only very minor scrape as shown in pic, otherwise no damage/dents/holes. the small brace that is cracked on muffler will be professionally re-tig welded b4 sale. this unit is full stainless 3 inches. 4 new gaskets included from P2M (only 2 needed for install). The tip was professionally modified/extended by prior owner to better fit their body kit, and was extended with the use of a v-band clamp. With stock bumper tip stuck out to far for my liking so I just machined a silencer/cap and used the v-band to hold it in place. SEE PICS Buyer will need to source a new v-band clamp for tip/cap as it broke Please PM for any questions as not on here much anymore since sold car. Not looking for any trades unless you have 4 new tires in size 225/40/18 More pics avaliable if needed. I CAN have the v-band addition removed and tip professionally rewelded (TIG) back to stock location, but before this would be done I'd require full payment for the system (and shipping if required) and need about a week b4 it would be ready to ship or picked-up.
__________________
Quote:
Last edited by r20crazy; 07-18-2021 at 01:16 PM.. Reason: info added |
|
Sponsored Links |
06-25-2021, 12:35 PM | #3 | |
Zilvia Junkie
|
it would be fairly easy to have v-band and extension cutoff and re tig to stock. i think about 3 inches was added, but idk as was like this when purchased.
__________________
Quote:
|
|
07-01-2021, 12:47 PM | #4 | |
Zilvia Junkie
|
bump. Price lowered to $500.
Have a great 4th of july
__________________
Quote:
|
|
07-11-2021, 05:53 PM | #6 |
Zilvia Junkie
|
|
07-18-2021, 01:13 PM | #7 | |
Zilvia Junkie
|
for those interested....
I CAN have the v-band addition removed and tip professionally rewelded (TIG) back to stock location, but before this would be done I'd require full payment for the system (and shipping if required) and need about a week b4 it would be ready to ship or picked-up. Adding this info to OP.
__________________
Quote:
|
|
Bookmarks |
Thread Tools | |
Display Modes | |
|
|