differential flange "falling out" of rear end - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Kingtal0n · 02-05-2018, 04:41 PM

I put a 3.69 ratio differential from Q45 into my nissan 240sx s14. After approx 100 miles, the front of it started falling out. It started as more and more slack in the drivetrain. then I took out the differential and I can pull the flange out about an inch.

I am not sure how to even start fixing this...

the previous owner put a 240sx flange into it and took out the q45 flange. so i assume this is what failed. I dont know what parts are involved to even try this

02-05-2018, 04:41 PM	#1
Kingtal0n Post Whore! Join Date: Jul 2005 Location: South Florida Age: 38 Posts: 4,649 Trader Rating: (17) Feedback Score: 17 reviews	differential flange "falling out" of rear end I put a 3.69 ratio differential from Q45 into my nissan 240sx s14. After approx 100 miles, the front of it started falling out. It started as more and more slack in the drivetrain. then I took out the differential and I can pull the flange out about an inch. I am not sure how to even start fixing this... the previous owner put a 240sx flange into it and took out the q45 flange. so i assume this is what failed. I dont know what parts are involved to even try this

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Switch to Hybrid Mode Threaded Mode