s13 240sx Tranny Swap - Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

VilanKapot1o3 · 07-03-2011, 04:13 AM

Im planning on getting an 240sx hatch, but the only nice ones that i could get are automatic. how much would everything cost if i change the tranny to manual? i tried searching, but couldnt find anything. Thanks!

xDsKuba · 07-03-2011, 04:31 AM

Depending on how easy it is to get your hands on parts it should cost somewhere around $300 to even $600. Good luck. Shouldn't be too hard.

VilanKapot1o3 · 07-03-2011, 04:41 AM

how much would the labor cost to get it done? would it be easy enough to do it yourself or i go to a shop that does it..how much it would it usually cost parts + labor?

JeKyL · 07-03-2011, 05:41 AM

im in pomona if you really need help let me know asap txt me at 909.201.9278, theres 50% off at a junkyard and i know they had 4 s13s 3 of which were manual your looking at around 200-300 bucks for everything including transmission if you go this route, and ill even do the conversion for you for 100 bucks

xDsKuba · 07-03-2011, 06:12 AM

^ sounds like a great deal right there. =] its pretty easy to do it yourself. I had my brother help me on taking off the auto tranny and lifting up the manual tranny. Pretty easy if you read over and over on how to do it and if you know what you are doing.

VilanKapot1o3 · 07-03-2011, 10:30 AM

Quote:

Originally Posted by JeKyL

im in pomona if you really need help let me know asap txt me at 909.201.9278, theres 50% off at a junkyard and i know they had 4 s13s 3 of which were manual your looking at around 200-300 bucks for everything including transmission if you go this route, and ill even do the conversion for you for 100 bucks

ok sounds good.. ill keep your number when i pick up the s13 and get the money for it. i dont have the car yet so yeah. you dont live too far from me. i live in west covina.

JeKyL · 07-03-2011, 12:58 PM

Ok well the parts might be more expensive at a later time, and I'm not to far from you, pomona is next to walnut and walnut is next to west covina I can come to you

VilanKapot1o3 · 07-03-2011, 04:52 PM

Quote:

Originally Posted by JeKyL

Ok well the parts might be more expensive at a later time, and I'm not to far from you, pomona is next to walnut and walnut is next to west covina I can come to you

how much would it cost? cuz im barely getting the car and i wont have excess money till my next pay or so.

JeKyL · 07-03-2011, 05:33 PM

your probably looking at around 400, you can probably find stuff for a bit cheaper on craigslist as far as clutch pedal little bs parts dont worry about the break pedal that can be cut so you can save some money, the most expensive part is the transmission

VilanKapot1o3 · 07-03-2011, 11:23 PM

Quote:

Originally Posted by JeKyL

your probably looking at around 400, you can probably find stuff for a bit cheaper on craigslist as far as clutch pedal little bs parts dont worry about the break pedal that can be cut so you can save some money, the most expensive part is the transmission

yeah i wouldnt really know any of those things. would you be willing to meet up one time and helping me out or something? i just bought the 240.. i just need to know how much money to save up for it.

VilanKapot1o3 · 07-03-2011, 11:36 PM

Quote:

Originally Posted by JeKyL

your probably looking at around 400, you can probably find stuff for a bit cheaper on craigslist as far as clutch pedal little bs parts dont worry about the break pedal that can be cut so you can save some money, the most expensive part is the transmission

yeah i wouldnt really know any of those things. would you be willing to meet up one time and helping me out or something? i just bought the 240.. i just need to know how much money to save up for it.

JeKyL · 07-03-2011, 11:39 PM

since your in covina, i go to the friday night covina meets at the home depot plaza on azusa by the big baseball stadium, it starts at 9 but people dont go until about 930-10 ish, if you want ill be there and we can talk more about it there is also a thread for the meet which you can post on its in this same section

VilanKapot1o3 · 07-04-2011, 03:27 AM

Quote:

Originally Posted by JeKyL

since your in covina, i go to the friday night covina meets at the home depot plaza on azusa by the big baseball stadium, it starts at 9 but people dont go until about 930-10 ish, if you want ill be there and we can talk more about it there is also a thread for the meet which you can post on its in this same section

I live across from that place. i see car meets there all the time. ill try to make it, but i dont think my 240 is nice enough for that yet.

JeKyL · 07-04-2011, 04:38 AM

It doesn't matter how nice or bad your 240 is its a 240 meet regardless as long as your an enthusiast its all good I rolled in 2 pos 240s there before its no big deal

VilanKapot1o3 · 07-04-2011, 12:16 PM

Quote:

Originally Posted by JeKyL

It doesn't matter how nice or bad your 240 is its a 240 meet regardless as long as your an enthusiast its all good I rolled in 2 pos 240s there before its no big deal

ayt forsure. i was wondering also.. i just got a problem with the 240. while i was making a sharp left with the car.. the dashlight and climate control light suddenly turned off and wont turn back on. do you happen to know whats causing this?

kholistics23 · 10-04-2011, 01:49 PM

Quote:

Originally Posted by JeKyL

im in pomona if you really need help let me know asap txt me at 909.201.9278, theres 50% off at a junkyard and i know they had 4 s13s 3 of which were manual your looking at around 200-300 bucks for everything including transmission if you go this route, and ill even do the conversion for you for 100 bucks

i was wondering if there is anyway you could help me out also. i just picked up 1990 240sx hatch and its automatic. im trying to convert it to a manual tranny. is there anyway you can help me? i live in the west covina area. thanks.

07-03-2011, 04:13 AM	#1
VilanKapot1o3 Join Date: May 2009 Location: West Covina Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	s13 240sx Tranny Swap Im planning on getting an 240sx hatch, but the only nice ones that i could get are automatic. how much would everything cost if i change the tranny to manual? i tried searching, but couldnt find anything. Thanks!

07-03-2011, 05:41 AM	#4
JeKyL Zilvia Junkie Join Date: Jul 2010 Location: SGV Age: 33 Posts: 352 Trader Rating: (0) Feedback Score: 0 reviews	im in pomona if you really need help let me know asap txt me at 909.201.9278, theres 50% off at a junkyard and i know they had 4 s13s 3 of which were manual your looking at around 200-300 bucks for everything including transmission if you go this route, and ill even do the conversion for you for 100 bucks __________________

07-03-2011, 12:58 PM	#7
JeKyL Zilvia Junkie Join Date: Jul 2010 Location: SGV Age: 33 Posts: 352 Trader Rating: (0) Feedback Score: 0 reviews	Ok well the parts might be more expensive at a later time, and I'm not to far from you, pomona is next to walnut and walnut is next to west covina I can come to you __________________

07-03-2011, 05:33 PM	#9
JeKyL Zilvia Junkie Join Date: Jul 2010 Location: SGV Age: 33 Posts: 352 Trader Rating: (0) Feedback Score: 0 reviews	your probably looking at around 400, you can probably find stuff for a bit cheaper on craigslist as far as clutch pedal little bs parts dont worry about the break pedal that can be cut so you can save some money, the most expensive part is the transmission __________________

07-03-2011, 11:39 PM	#12
JeKyL Zilvia Junkie Join Date: Jul 2010 Location: SGV Age: 33 Posts: 352 Trader Rating: (0) Feedback Score: 0 reviews	since your in covina, i go to the friday night covina meets at the home depot plaza on azusa by the big baseball stadium, it starts at 9 but people dont go until about 930-10 ish, if you want ill be there and we can talk more about it there is also a thread for the meet which you can post on its in this same section __________________

07-03-2011, 04:31 AM	#2
xDsKuba Join Date: May 2008 Location: San Jose, CA Age: 32 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	Depending on how easy it is to get your hands on parts it should cost somewhere around $300 to even $600. Good luck. Shouldn't be too hard.

07-03-2011, 04:41 AM	#3
VilanKapot1o3 Join Date: May 2009 Location: West Covina Posts: 14 Trader Rating: (0) Feedback Score: 0 reviews	how much would the labor cost to get it done? would it be easy enough to do it yourself or i go to a shop that does it..how much it would it usually cost parts + labor?

07-03-2011, 06:12 AM	#5
xDsKuba Join Date: May 2008 Location: San Jose, CA Age: 32 Posts: 20 Trader Rating: (0) Feedback Score: 0 reviews	^ sounds like a great deal right there. =] its pretty easy to do it yourself. I had my brother help me on taking off the auto tranny and lifting up the manual tranny. Pretty easy if you read over and over on how to do it and if you know what you are doing.

07-04-2011, 04:38 AM	#14
JeKyL Zilvia Junkie Join Date: Jul 2010 Location: SGV Age: 33 Posts: 352 Trader Rating: (0) Feedback Score: 0 reviews	It doesn't matter how nice or bad your 240 is its a 240 meet regardless as long as your an enthusiast its all good I rolled in 2 pos 240s there before its no big deal __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode