Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum

Go Back   Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum > General > Tech Talk > S Chassis

S Chassis Technical discussion related to the S Chassis such as the S12, S13, S14, and S15.


Reply
 
Thread Tools Display Modes
Old 07-06-2013, 02:28 PM   #1
xs420240sx
Zilvia Junkie
 
Join Date: Jun 2011
Location: CA
Posts: 595
Trader Rating: (5)
xs420240sx is an unknown quantity at this point
Feedback Score: 5 reviews
s14 Godspeed Project Steering Rack Adapter/Spacer Issue

I just got one of the Godspeed style steering rack adapters, not the 2 little rings, but the full bolt on goes on the passenger side adapter for my S14. I first tried installing it with stock length inner tie rods, that didn't work and I got too much toe in but I almost expected this. So I went with some new 300zx inners and tried with that. The passenger side with the spacer I was able to get aligned pretty straight but when I went to the driver side with the ring spacer, I ran out of threads and couldn't get the wheel toed in enough, it was toed out due to the shorter 300zx inners. My only thought now is to switch out the driver side 300zx inner back to a stock length inner. This was all after I re-centered my rack after getting around 3.8 turns. Has anyone else had problems with these spacers other than your inners being too long?
xs420240sx is offline   Reply With Quote
Sponsored Links
Reply

Bookmarks


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 12:57 AM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
vB.Sponsors
Copyright © 1998 - 2019, Zilvia.net™