Kouki1998

so when i have my eccs relay wired up correctly my ecu gets no power and the fuel pump doesnt prime. this started happening after i replaced my engine wiring harness with a brand new one from wiring specialties. i have talked with yuri and he had told me the wiring for the eccs was mixed up. so i corrected it and still nothing. i can get power to the ecu by just putting one of the red hot wires to the red/black ecu wire but i want to get this fixed correctly, any ideas? btw if i do put power straight to the ecu my fuel pump doesnt stop priming so i suspect i have damaged the ecu and will have another one to test in the next day or two.

any help is appreciated
i want to get my car back on the road already.....

5280VertDET

http://forums.nicoclub.com/how-to-24...p-t545598.html

Maybe this will shed some light?

__________________
S13 Vert | SR | PE1420 | 5-Speed | 15x9.5 - 0 |

Kouki1998

i will keep this in mind, but i am looking for a better solution than just hardwiring it. i dont wanna do all of that if my issue could potentially be an easy fix. i appreciate it though

5280VertDET

This is an easy fix, should be done anyway. GL.


Do this, with out a relay and it's good for troubleshooting.

__________________
S13 Vert | SR | PE1420 | 5-Speed | 15x9.5 - 0 |